PONTIAC Transmission & Drivetrain - Customizable - Free Shipping on Orders Over $109 at Summit Racing

Dorman Transmission Electro-Hydraulic Control Modules

Dorman transmission electro-hydraulic control modules (TEHCM) combine the TCM, valve body solenoids, and pressure and temperature switches into one unit. They restore the ability to shift the vehicle in and out of gear without hesitation or rough shift. They're fully remanufactured and vehicle simulator-tested for durability and quality assurance. Vehicle VIN is required at time of order. Requires programming after installation.

4.91 out of 5 stars ( 11 )

$319.99

—

$744.99

American Powertrain Tremec T-56 Magnum Manual Transmissions and Installation Kits

American Powertrain Tremec T-56 Magnum manual transmissions and installation kits are designed to withstand up to 700 lbs.-ft. of torque. Their gears feature substantially increased face widths and 2-piece laser-beam welded construction, allowing for greater control of the tooth angles, pitch, and alignment. The transmissions also include a bolstered one-piece countershaft to resist distortion, and a stronger input shaft. Magnum's new synchronizers are built with fine-tooth angles, redesigned shift forks—and an extensively modified transmission case to prevent leaks under high-stress conditions and increase overall power-handling capabilities. Nearly two dozen models are available; choose the kit recommended for your vehicle application. Kits include: * Cryo-hardened steel driveshaft slip yoke with 1330 style U-joint * Mechanical speedometer conversion * VSS wiring harness for electronic speedometer of EFI ECU * Reverse light wiring, weather seal harness, non-polar * Reverse lockout wiring harness * ISO-X ballistic, low-profile transmission mount * Steel roller pilot bearing * White shift knob with black 6-speed shift pattern

Not Yet Reviewed

$4,895.95

—

$5,025.00

Zumbrota Remanufactured Axle Assemblies

Zumbrota Drivetrain remanufactured axle assembles offer reliable performance at a value price. They're available for thousands of applications—from passenger and off-road vehicles, to race cars and pulling trucks. The axle tubes are straightened to OE specifications; the housings are hydro-blasted and rinsed, then tested for surface wear and cracks; and the gear patterns and rolling torque are properly adjusted to ensure optimum tooth contact. Zumbrota replaces all seals, bearings, crush sleeves, pinion nuts, and shims on the front and/or rear axle assemblies. Order the replacement model recommended for your specific vehicle.

4.0 out of 5 stars ( 9 )

$1,278.99

—

$3,016.99

Moser Engineering 12-Bolt GM Housing and Axle Packages

Moser Engineering 12-bolt GM housing and axle packages give you the freedom to choose the components that you prefer, while still fitting your vehicle without modifications. They include a steel housing, an axle shaft set with wheel studs, bearings, and a drain plug. You can order them with brakes, to fit your OEM brakes, or a specific brake kit. Available in a multitude of options, the Moser 12-bolt GM housing and axle packages are a perfect fit for your everyday driver or performance vehicle.

Not Yet Reviewed

$4,494.00

Moser Engineering M9 Fabricated 9 in. Housing and Axle Packages

Engineered to race tolerances, these Moser M9 fabricated 9 in. housing and axle packages allow you to build your axle package with various custom selections and specifically for your application. They are built race-tough with seamless steel tubing, new brackets, new housing ends, new bushings, custom alloy axles, studs, and heavy-duty retainer plates. The Moser housings are made from 1/8 in. laser-cut mild steel and are combined with a 3/8 in. face plate. They come standard with internal gussets and bulk heads, able to take on a tough day at the track. These M9s also have custom-machined fill and drain bungs for easy maintenance. See the linked custom selection sheet to design and create your next M9 fabricated 9 in. housing and axle package.

Not Yet Reviewed

$2,547.00

Moser Engineering 9 in. Housing and Axle Packages

Moser Engineering 9 in. housing and axle packages give you the freedom to choose the components that you prefer, while still fitting your vehicle without any modifications. They include a steel housing, an axle shaft set with wheel studs, and bearings. You can order them with brakes, or to fit your OEM brakes or a specific brake kit. Available in a multitude of options, these packages are a perfect fit for your everyday driver or performance vehicle.

Not Yet Reviewed

$1,480.00

—

$3,114.00

Zumbrota Remanufactured Manual Transmissions

Zumbrota remanufactured manual transmissions are some of the most dependable 5-speed, 6-speed, and transaxle units available. Each transmission is put through tremendous testing and inspections to assure the highest quality possible to use in your vehicle. Benefits of Zumbrota remanufactured manual transmissions include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All housing and top covers are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent inspection of internal parts, including gear wear checks, main shaft straightness test and synchronizer testing * 100 percent replacement of seals, bearings, and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty

3.71 out of 5 stars ( 21 )

$1,560.99

—

$1,583.99

Inland Empire Driveline High-Strength Driveshafts

Big power and lots of traction can twist your stock driveshaft into pieces, so replace it with something better, such as these Inland Empire Driveline high-strength driveshaft assemblies. These 3 in. diameter tubes are custom-drawn for consistent strength. Their forged yokes are welded on using state-of-the-art processes for improved reliability. They're accepted for use in most NHRA and all IHRA classes.

4.86 out of 5 stars ( 22 )

$502.84

Strange 12-Bolt F-Body Rear End Assemblies

These Strange 12-bolt F-body rear-end assemblies are designed to replace the entire rear-end in your F-body Camaro or Firebird. They feature the following components: * Strange designed 12-bolt case with torque arm provision * Premium nodular iron casting * Choice of differential carrier * 33 or 35 spline Pro Race Axles * Pro gear set * Choice of gear ratio * Fully welded axle tubes * S-series yoke with u-joint * Accepts 1993-97 or 1998-2002 disc or drum brakes (sold separately) * Chrome rear-end cover

Not Yet Reviewed

$3,033.99

—

$3,419.99

Strange Bolt-In S60 Rear Differential Assemblies

Strange bolt-in S60 rear differential assemblies are designed to fit your vehicle without any modifications. Brake kits are sold separately. Assemblies feature: * Strange-designed S60 housing cast from nodular iron * Large nodular iron bearing caps * One-piece center casting for enhanced rigidity * Adjuster nuts for precise and easy setup * Fully welded tubes * Strange ring and pinion gear * 35-spline axles

4.5 out of 5 stars ( 4 )

$2,794.99

—

$3,371.99