Availability
Showing In Stock Items. Show All 60 Items.
Mishimoto air-to-water performance intercoolers are built with cast aluminum end tanks that are precision TIG-welded to a robust bar-and-plate core. The cast end-tanks reduce potential failure points, making them more reliable against possible leaks than cut and welded tanks. Order a Mishimoto air-to-water performance intercooler for performance gains and peace-of-mind reliability. Available in a multiple powdercoated finishes
( 1 )
$815.95
The all-new Ranger Stage-1 All-in-One Audio Systems from Rockford Fosgate features a single enclosure that houses two 5 1/4 in. Element Ready speakers and their PMX-1 source unit. The speakers feature a full-range coaxial design and are rated to handle 50 watts, which means solid mid-bass response and crisp high-end output. The PMX-1 source unit powers the system that features a 2.3 in. wet bonded dot matrix display, so it's built rugged and it's also easy to read in any light, day, or night. It also features Bluetooth connectivity, so it's easy to quickly connect your phone and get your playlist dialed. The bottom line is ... if you're looking for an All-in-One audio solution rugged enough to stand up to the off-road environment, that's easy to install with simple Bluetooth connectivity, your search is over. The Rockford Fosgate Stage-1 All-in-One Audio Systems have all the great features that you want and need. Features at a glance: * All-in-One Audio Solution—housed in a single enclosure, the speakers and source unit come pre-installed which means no additional setup or tweaking is needed * Element Ready—purpose built for the off-road environment, Rockford's Element Ready products are built to stand up to water, dirt, mud and UV rays, making sure all your audio components perform regardless of the conditions * Plug-and-Play Design—no drilling, no cutting and designed to work right out of the box * Simple installation ensures less time with audio system installation and more time out riding * Bluetooth Control—with Bluetooth connectivity it's easy to control your music and take your playlist with you no matter where you go * Everything is included to make for easy installation and all to ensure less time in the garage and more time out riding * No setup required * Features dual 5.25 in. Element Ready speakers * Punch Marine Grade Media Receiver with 2.3 in. Dot Matrix Display * AM/FM/WB Tuner * 7-Band Graphic EQ + PEQ * Wet bonded 2.3 in. Full Dot Matrix LCD display * Installs in place of factory center cup holder in under 5 minutes * Voltage gauge with low voltage warning * A2DP and AVRCP Bluetooth Wireless Streaming
Not Yet Reviewed
$659.99
On Sale
XDR performance slip-on muffler systems feature 409 stainless steel construction internals for long life. The cases are made of either 304 or 409 stainless steel. The mandrel-bent inlet tubes flow into the "straight-through" crossflow performance muffler providing a moderate to aggressive deep sound level. Some systems will come with tailpipes and tips, and some will re-use your stock tips. XDR exhaust systems include all hardware and installation instructions necessary for a simple at-home installation. Give your ride a performance advantage, along with eye-catching good looks with XDR slip-on muffler systems. Order the model to fit your application needs.
( 2 )
$1,145.95
$595.95
—
$825.95
Full Spectrum Power offers Pulse IPT batteries for a wide range of powersports applications, including street and off-road bikes, scooters, ATVs, UTVs, and snowmobiles from brands like Aprilia, Arctic Cat, ATK, BMW, E-Ton, Honda©, Hyosung, Kawasaki, KTM, Kymco, Polaris, Suzuki, Triumph, Yamaha, Can-Am, Ducati, Harley-Davidson©, Moto Guzzi, and Ski-Doo. Universal battery models are also available. Choose the size and power desired for your vehicle. All Pulse IPT batteries all have the following features: * Universal Charger Capability: Most commercially available battery chargers work with the Pulse IPT batteries *Advanced Case Design: Lighter and stronger than the previous model; it rejects heat, vibration, gas and oil *Advanced Cell Design: Full Spectrum designed the Pulse IPT cells to cope with the demands of motorsports. Every component of the cells are designed and optimized for motorsports, based on a decade of experience building engine start batteries * V Direct Multi Terminal: The solid copper terminals have 4 threaded mount holes. Attach your accessory wires without having to use long screws on one small terminal * V Sleeve Silicon Terminal Covers: Color-coded for polarity, silicon terminal covers protect against short circuits
Not Yet Reviewed
$599.00
Upgrade the comfort of your off-road machine with MasterCraft S2/4 UTV seats. They offer deep bolsters for superior containment during those rough spots, and feature a removable bottom cushion for easy cleaning. A pass-through at the base of the rear cushion allows access to the seat release lever. The use of MasterCraft's UTV-specific mounts will facilitate installation. MasterCraft S2/4 seats are designed to endure the rigors and versatility of today's UTV market. Order the color accents you prefer.
Not Yet Reviewed
$519.95
MBRP Sport slip-on mufflers are true performance exhausts for a wide range of ATVs and UTVs, including Honda®, Bombardier, Can-Am, Suzuki, Kawasaki, Arctic Cat, Yamaha, and Polaris. They deliver maximum flow, with a clean and crisp sound. The round 304 stainless steel canisters are black powdercoated, with round turndown outlets. Sport mufflers feature chambered internal construction for just the right amount of resonance. Order the model recommended to fit your all-terrain vehicle application.
( 11 )
$509.99
—
$514.99
KC HiLiTES multi-function rear racing LED light bars are exclusively configured for use on UTVs, Jeeps, truck racks, race trucks, or even custom applications. Enhanced features include red tail/brake light with blinker capability, amber dust lights with solid or strobe capability, and white flood/work lights for area lighting. The use of a rear-facing LED taillight bar dramatically improves rider safety on the trail or off-roading through desert terrains for recreational and competitive race course use. These KC HiLiTES light bars are also equipped with standard functions to comply with street legal standards—perfect for use on your Jeep, car, truck and UTV (if permitted for street use). Additional details: * Lightweight extruded aluminum housing for maximum heat dissipation and durability * Weather-resistant enclosure and shatter-proof polycarbonate lens for maximum durability * 40 degree spread and 180 degree flood beam optics * LED source: 4 watt Cree LED * Raw lumens: 4,500 lm * LED color: Red, amber, and clear LEDs * Amp draw: 5.0 amps (max draw) * Voltage: 12 V DC * Certifications: SAE J595, CT13, SAE J1119 * Product dimensions: H - 1.22 in. x L - 28.14 in. x W- 2.25 in. * For street or competitive racing * Mounting options: Full-length adjustable bolt slot located on rear section of light bar, or threaded end mounts for use with bolted or welded-on vehicle mounting tabs
Not Yet Reviewed
$551.00
MBRP Performance Series exhaust systems maximize exhaust flow and minimize exhaust temperatures. They're manufactured from 100 percent aluminized steel and come standard with MBRP's smaller muffler. Fully sealed tubing adds years to your system, avoiding rust-through on seams. Performance Series units are road, track, and dyno-tested; and they're specially tuned to deliver an aggressive exhaust note. Order the model designed for your specific vehicle. Other features and benefits: * Fully mandrel-bent tubing and minimal bend degree angles increase airflow * Better gas mileage * Bolt-on, no-weld design for easy installation * Direct-fit to the OEM hangers; clamps and accessories included * Available for gas truck and diesel applications * Limited one-year workmanship warranty
( 45 )
$564.99
MBRP has developed a full line of ATV and UTV performance exhaust, including these Performance 5 in. slip-on mufflers. All systems feature stainless steel and billet aluminum construction and include USFS spark arrestors. Enjoy power gains, head turning sound, and eye-catching style with the MBRP Performance 5 in. slip-on mufflers designed to fit your ATV/UTV.
( 2 )
$504.99
—
$559.99
MBRP PowerTech4 dual slip-on mufflers deliver a clean, enhanced exhaust note. They are proven to work with noticeable dyno-proven gains. All systems are made of T304 stainless steel and have billet aluminum end caps paired with a high heat ceramic coating. MBRP PowerTech4 exhaust slip-ons are known for their dependability and reliability, and are guaranteed to fit.
( 4 )
$899.99
—
$944.99
Cylinder Works cylinders are your powersports alternative to OEM or re-plating. These standard bore cylinders are brand new—not remanufactured or replaced—and are nickel silicon carbide-plated cast aluminum to provide long life. They're precision-honed to the exact size to make your piston installation easier. Cylinder Works offers dirt bike and ATV enthusiasts quick and affordable access to direct fit replacement cylinders. Order the bore size recommended for your application.
Not Yet Reviewed
$559.50
—
$591.81
Clearance
Pro Armor traditional half doors feature all-aluminum construction to save weight and ensure strength and durability. They are direct bolt-ons, do not require drilling, are available with sheet metal skins or nets, and are fully interchangeable. Pro Armor traditional half doors not only make your ride look great with their state-of-the-art design, but they also make it much easier to enter and exit your ride. Plus, the doors are available in your choice of powdercoated finishes.
Not Yet Reviewed
$1,069.95
$610.50
Off-roaders know that dust is a leading culprit for clogging air cleaners, robbing horsepower, and, when left unchecked, major engine damage. S&B Filters particle separators remove 94 percent of dust before reaching the stock filter. Air is spun as it enters one of 19 vortexes, throwing dust to the outer side of the air tubes. A scavenge fan, rated for 50,000 hours in rough conditions, ejects the dust through the exhaust and pulls clean air to the filter. The S&B particle separator and stock filter reach capacity after 2,536 grams of dust, versus a mere 74 grams with the stock system and filter. The included billet clamps allow these separators to be mounted to most UTV roofs or cages. Play in the sand all day when you're equipped with an S&B Filters particle separator. Order the model designed to fit your machine.
( 3 )
$669.99
RCV Performance offers Pro Series II UTV axles for a variety of Polaris, Can-Am, and Yamaha off-road machines from 2014 and up. They're designed and engineered to handle the most abusive conditions on the planet. From desert racing to rock bouncing, Pro Series II is the ultimate in strength and endurance. All 300M components and RCV's specially developed SPEC grease provide the peace of mind needed to tackle any terrain. Tests prove these axles to be two times stronger than the OEM shafts. Front and rear axles are available separately. Additional product details: * FRONT axles: 300M and 4340 CV housings and 300M CV internal components * REAR axles: 300M CV housings and CV internal components * Fixed CVs for ultimate angle (Over 40 degree max operating angle) * Plunging fine-spline shaft for reduced friction * 300M 40/41 spline axle shaft * Largest internal CV components in any UTV axle * New proprietary technology for wear resistance and longevity of CV components * Designed for extreme racing conditions
Not Yet Reviewed
$799.95
Kleinn Direct-Fit Onboard Air systems are a perfect fit to your Jeep, truck, SUV, or UTV. They are designed to fit seamlessly on your vehicle without the need to drill holes or modify your vehicle, resulting in a quick and easy installation with a factory add-on look. Most direct-fit kits include Kleinn's exclusive high-output waterproof air compressor, a Cortec coated all-steel air tank with black epoxy finish, and powdercoated vehicle-specific mounting brackets. They may also include a quick-connect tire inflator with storage bag and hardware, air line, wiring, and detailed instructions. Check product attributes for exact features as components do vary per kit.
Not Yet Reviewed
$729.95
Overland adventures demand reliable cargo space. With a Rough Country rear cargo rack kit, you can increase your UTV's storage capabilities without compromising bed space or dumping functionality. These rugged, heavy-duty steel racks are built to withstand any challenge, ensuring durability and strength through every adventure. Constructed from heavy-duty steel, the cargo racks boast a corrosion-resistant, powdercoat finish that protects against the harshest elements. No matter the terrain, the IP67 waterproof design ensures that your gear stays safe from water, dust, and dirt. The kits' versatile mesh pattern includes multiple tie-down points, providing flexibility to secure all your gear without worry. Enjoy a quick and easy setup with 100 percent bolt-on installation—no drilling, no cutting, just a secure, factory-like fit. Plus, the full dump bed functionality remains intact, so you can haul heavy loads or dump with ease. Whether you're navigating rugged landscapes or navigating daily tasks, Rough Country rear cargo racks provide unmatched reliability and toughness. With years of protection and a design built to last, they're the ultimate upgrade for your Polaris, Can-Am, or other UTV model. * (Optional LED Lights, available separately: Includes two pairs of 2 in. square flush mount Cree LED lights (Black Series)
Not Yet Reviewed
$649.95
On Sale
Whether it's to turn heads, sling mud on a path less traveled, or simply to get extra clearance for those bigger tires, Rough Country M1 suspension lift kits offer amazing off-road performance at an incredible value. They are easy to install, and each kit includes the specific heavy-duty components and hardware needed for your truck's lift, plus Rough Country M1 shocks. Select the kit designed for your truck with the lift desired. M1 shock features: * 2 in. seamless extruded tube * 46mm digressive piston * Self-adjusting, deflective-disc independent rebound and compression * 18mm centerless-ground, case-hardened, chromed, and super-polished rod * 46mm monotube design ensures consistent, fade-free performance in all conditions * Digressive valving instantly reacts to changing surface conditions * Zinc plated for resistance against harsh elements * Durable vulcanized natural rubber bushings
( 1 )
$699.95
$629.96
Eliminate the wait with Cylinder Works standard bore cylinder kits. They arrive ready to install, eliminating the hassle of sending out your cylinder for re-plating or boring, and they're competitively priced compared to typical re-plating costs. These cylinders look virtually identical to your OEM parts. Cylinder Works standard bore cylinder kits come in model-specific kits, so choose the one that best fits your application. Features include: * Super-convenient--just purchase and install * Nickel silicon carbide plated for long life * Honed to exact size for easy piston installation * Complete with gaskets, cylinder, and piston kit * No machine work required
( 2 )
$624.06
—
$808.31
On Sale
Put a barrier between you and the elements with a Quadboss cab top-style roof for your powersports machine. Order the Quadboss roof model that's specific to your utility vehicle application—and get ready to enjoy the great outdoors! Features of Quadboss roofs include: * Vehicle-specific roofs (Honda®, Polaris, Kawasaki, Yamaha) * Provides strong topside protection from the sun, rain, and dirt * Made from durable polyethylene material with UV stabilizers * Molded-in drains allow water to run off * Molded-in trays allow for extra storage on some models
( 2 )
$741.07
$666.96
All Balls Racing Stealth drive prop shafts are dynamically balanced to reduce noise, vibration and lengthen the time between servicing. These fully assembled prop shafts feature phased pairs that include a carrier bearing or a one-piece design to reduce cost, ease assembly, and provide a complete ready-to-install repair solution right out of the box. All Balls Stealth replacement driveshafts are designed with the same dimensions as the OEM units for guaranteed fitment—and also feature greaseable U-joints for increased life. Order the model recommended for your UTV application.
( 2 )
$522.45
—
$739.05
DeatschWerks powersports fuel injectors combine precision, drop-in fitment, dynamic data, and value to maximize your performance outcome. These high-flow fuel injectors are just one of the many high-quality replacement components that will keep your ride moving forward. DeatschWerks specializes in high-performance EFI fuel system solutions for the automotive aftermarket, as well as powersports applications such as motorcycles and snowmobiles. Order the model recommended for your application needs.
Not Yet Reviewed
$569.00
Clearance
Add performance and sound to your exhaust system with Gibson's Side X Side performance slip-on mufflers. They feature Gibson's Suspended Flow (SFT) Superflow muffler design that utilizes a louvered and chambered internal core with no packing to blow out. These units are available in a variety of configurations, shapes, and finishes. Order the model recommended for your off-road application.
( 17 )
$699.99
—
$814.99
Nitrous Express RZR nitrous plate systems are specifically designed for your machine. These NX nitrous plate systems bolt between the cylinder head and the intake boot--and provide up to an additional 40 hp at the flip of a switch. The RZR systems include an electronic wide-open throttle switch, so the nitrous only activates at full throttle and automatically deactivates when you let your foot off the accelerator pedal. Nitrous Express RZR nitrous plate systems can be installed in one afternoon with common hand tools. RZR systems come complete with: * Lightning Series integrated nitrous and fuel solenoids * Braided stainless hoses * Billet nitrous plate * Direct plug-in fuel rail adapter—no need to cut factory lines * Relay and relay harness * TPS Autolearn activation switch * Jetting for 10, 20, 30, and 40 hp (depending on kit) * Available with no bottle, 2.5 or 5 lb. nitrous bottle and two stainless bottle brackets
( 1 )
$832.59
Off-road adventures require serious gear, and flimsy racks just don't cut it, especially for Polaris ADV 5 models. Rough Country's Xpedition roof racks are the solution. These heavy-duty racks boast features like adjustable cross rails, light bar compatibility, and a durable powdercoat finish. The slotted cross rails feature tracks that let you slide your mounts and accessories anywhere for a perfect, custom fit. For the adventurer who wants to navigate uncharted territory in the dark, the Xpedition roof racks have a beefy front section that can handle the addition of an LED light bar (sold separately). These all-steel roof racks also feature a tough powdercoat finish that protects against scratches, fading, and rust and uses top-quality stainless steel hardware to keep your rack looking sharp for years to come. In addition, the Rough Country Xpedition roof racks utilize existing attachment points for a stress-free, bolt-on installation that gets you trail-ready in no time. So ditch the flimsy racks and level up your Xpedition's game with a Rough Country roof rack—the ultimate partner for your off-road excursions that will let you conquer trails, blaze new paths, and look good doing it! Select the preferred model for your UTV.
Not Yet Reviewed
$609.95
—
$699.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
