Availability
Showing In Stock Items. Show All 174 Items.
Antigravity Batteries Re-Start batteries have built-in jump-start and full management systems. They intelligently monitor their own voltage, and just before going completely dead, they promptly initiate sleep mode with just enough energy to get your vehicle started again. Simply press the restart button located on the battery, start your vehicle and drive away. These are extremely lightweight and high-power lithium-ion replacements for your heavy lead/acid batteries. They're available for most modern motorcycles and ATV/UTVs. No more dead battery emergencies or being stranded with Antigravity Batteries Re-Start batteries! Features and specs: * Up to 2 times the cranking power and lifecycle of heavy lead/acid batteries * Up to 70 percent lighter than heavy lead/acid batteries * Management system offers low-voltage cutoff, over-charge/over-discharge protection, lithium cell balancing, and thermal protection * 4 terminal posts for ease of use with right or left side connections and any orientation (no liquids to spill) * Capable of holding a charge for up to one year when no parasitic drains (alarms, GPS, etc.) are present * Shock and vibration resistant for durability * No acids or heavy metals for lower environmental impact
( 13 )
$284.99
—
$449.99
Odyssey sealed rechargeable drycell batteries provide high engine-cranking pulses and are capable of 400 deep cycles. They can be installed on their sides or at any angle and have a 2-year storage life at 25 degrees C.
( 225 )
$279.99
—
$312.99
Full Spectrum Power offers Pulse IPT batteries for a wide range of powersports applications, including street and off-road bikes, scooters, ATVs, UTVs, and snowmobiles from brands like Aprilia, Arctic Cat, ATK, BMW, E-Ton, Honda©, Hyosung, Kawasaki, KTM, Kymco, Polaris, Suzuki, Triumph, Yamaha, Can-Am, Ducati, Harley-Davidson©, Moto Guzzi, and Ski-Doo. Universal battery models are also available. Choose the size and power desired for your vehicle. All Pulse IPT batteries all have the following features: * Universal Charger Capability: Most commercially available battery chargers work with the Pulse IPT batteries *Advanced Case Design: Lighter and stronger than the previous model; it rejects heat, vibration, gas and oil *Advanced Cell Design: Full Spectrum designed the Pulse IPT cells to cope with the demands of motorsports. Every component of the cells are designed and optimized for motorsports, based on a decade of experience building engine start batteries * V Direct Multi Terminal: The solid copper terminals have 4 threaded mount holes. Attach your accessory wires without having to use long screws on one small terminal * V Sleeve Silicon Terminal Covers: Color-coded for polarity, silicon terminal covers protect against short circuits
Not Yet Reviewed
$349.00
All Balls Racing fuel pump modules are designed to restore lost performance on a broken or poorly functioning fuel pump. These electric in-tank modules draw less current than OEM units—while maintaining the same flow rate at working pressure—to reduce operating temperature and extend the life of the unit. Each pump includes a complete module, retaining nut, and gasket. Order the replacement fuel pump module designed to fit your ATV/UTV application.
( 10 )
$257.74
—
$334.98
All Balls Racing Stealth drive prop shafts are dynamically balanced to reduce noise, vibration and lengthen the time between servicing. These fully assembled prop shafts feature phased pairs that include a carrier bearing or a one-piece design to reduce cost, ease assembly, and provide a complete ready-to-install repair solution right out of the box. All Balls Stealth replacement driveshafts are designed with the same dimensions as the OEM units for guaranteed fitment—and also feature greaseable U-joints for increased life. Order the model recommended for your UTV application.
( 2 )
$303.00
—
$522.45
Seizmik overhead gun racks install on the roll bar of most vehicles and store your guns overhead up out of the way. These systems use premium materials like glass-filled nylon and cast aluminum. A durable and adjustable grip conforms to the gunstock and barrel with multiple settings to hold the jaws securely shut around the firearm. They feature premium rubber lined jaws that won't scratch or mar the finish of the weapon, keeping the gun away from metal surfaces at all times. Seizmik overhead gun racks can be used universally by choosing the correct roll bar size and width or look for one that is specific to you UTV's model.
( 1 )
$261.24
Extreme Metal Products Polaris bed covers are molded hardtop tonneaus designed to keep the dust, mud, and rain off your gear. The rear section is hinged and folds forward on the front to allow for easy access with or without the tailgate open. These covers attach with rubber expansion plugs in the factory holes on the top of your stock bed. Easy, tool-less removal gives you versatility for every adventure. Equip your UTV with a protective bed cover; order the model designed to fit your Polaris. Additional features: * Durable, molded-plastic construction with hinges * Water-resistant to keep gear and cargo clean and dry * Stylish and functional * Front section is about 4 in. higher than the stock bed to give more clearance for a full-size cooler
( 4 )
$364.99
Agency Power has created the best exhaust system, that is a simple plug-and-play for the RZR XP Turbo platform. The twin tip, side exit exhaust was designed to balance exhaust flow without causing obnoxious noise over the factory unit. The system is built from T304 stainless steel and features precision TIG-welds. The dual high-flow resonators are secured in place with a laser-cut cradle that features the AP logo. The type of resonators used can be seen in many of the Agency Power high-performance vehicle exhausts, which on turbo cars, produce a beautiful sound. Designed as a direct replacement, the Agency Power exhaust uses the factory hanger locations and bolts up to the stock turbo pipe without modifications. The exhaust features a thick flange and includes a new gasket with hardware. Each tip outlet has been designed to work with spark arrestors that can be optionally purchased. The final product is completely polished for a show finish giving the rear end of the RZR Turbo a sleek look with a satisfying sound. As tested on AP's Mustang Dyno, the exhaust gained about 5-6 peak horsepower over stock. Even more important testing was proven when XTC Power Sports ran this exhaust system on their 2017 competition vehicle during the grueling 500+ mile Vegas to Reno race. The exhaust is a great addition to RZR XP Turbo, along with other Agency Power Polaris accessories. Product features: *Polished stainless steel constructions * Precision TIG-welding * Clean and satisfying sound * Direct bolt-on * Can be used with spark arrestors * Race Proven
Not Yet Reviewed
$500.00
On Sale
XDR Magnum Grip Hill Killer gated shifters have an ergonomic design and a modern aggressive look. These gated shifters are designed to be used as a safety device when attempting steep hill climbs. This is accomplished by eliminating the reverse lockout feature of the ratchet gate plate—ensuring quick shifts from forward to reverse gear in an attempt to save the front-end from going over backwards when climbing steep hills. XDR Magnum Grip Hill Killer gated shifters are available to fit Side x Sides with or without factory shift boot. Features include: * CNC-machined billet aluminum construction * Replaceable Midnight black polycarbonate side grip plates that incorporate a diamond design pattern for a sure grip when shifting * Spring-loaded stainless steel trigger for positive locking and unlocking in and out of park * Hill Killer gate plate construction—10-gauge 304 stainless steel for durability and long life * Tough MIL-spec anodized finish * Side grip plates are customizable (with numerous colors of the optional polycarbonate side grip plates, or the real rosewood option) * All necessary hardware and easy-to-follow instructions
( 3 )
$349.95
—
$386.95
Off-road adventures require serious gear, and flimsy racks just don't cut it, especially for Polaris ADV 5 models. Rough Country's Xpedition roof racks are the solution. These heavy-duty racks boast features like adjustable cross rails, light bar compatibility, and a durable powdercoat finish. The slotted cross rails feature tracks that let you slide your mounts and accessories anywhere for a perfect, custom fit. For the adventurer who wants to navigate uncharted territory in the dark, the Xpedition roof racks have a beefy front section that can handle the addition of an LED light bar (sold separately). These all-steel roof racks also feature a tough powdercoat finish that protects against scratches, fading, and rust and uses top-quality stainless steel hardware to keep your rack looking sharp for years to come. In addition, the Rough Country Xpedition roof racks utilize existing attachment points for a stress-free, bolt-on installation that gets you trail-ready in no time. So ditch the flimsy racks and level up your Xpedition's game with a Rough Country roof rack—the ultimate partner for your off-road excursions that will let you conquer trails, blaze new paths, and look good doing it! Select the preferred model for your UTV.
Not Yet Reviewed
$399.95
Stylishly rugged Rough Country bumpers feature durable steel construction and offer unbridled on- and off-road protection for the rear of your vehicle, while giving you increased tire clearance for off-road articulation. With bold angles and contoured curves, these simple bolt-on rear bumpers are sure to get attention. Transform your vehicle into a legend with an assist from the Rough Country bumper best suited for your application. More product features and items include: * Manufactured from durable 5/32 in. thick steel * D-ring set * Corrosion-resistant black finish * Hardware kit with detailed instructions that include a list of parts
( 1 )
$328.95
Upgrade the comfort of your off-road machine with MasterCraft S2/4 UTV seats. They offer deep bolsters for superior containment during those rough spots, and feature a removable bottom cushion for easy cleaning. A pass-through at the base of the rear cushion allows access to the seat release lever. The use of MasterCraft's UTV-specific mounts will facilitate installation. MasterCraft S2/4 seats are designed to endure the rigors and versatility of today's UTV market. Order the color accents you prefer.
Not Yet Reviewed
$519.95
Off-roaders know that dust is a leading culprit for clogging air cleaners, robbing horsepower, and, when left unchecked, major engine damage. S&B Filters particle separators remove 94 percent of dust before reaching the stock filter. Air is spun as it enters one of 19 vortexes, throwing dust to the outer side of the air tubes. A scavenge fan, rated for 50,000 hours in rough conditions, ejects the dust through the exhaust and pulls clean air to the filter. The S&B particle separator and stock filter reach capacity after 2,536 grams of dust, versus a mere 74 grams with the stock system and filter. The included billet clamps allow these separators to be mounted to most UTV roofs or cages. Play in the sand all day when you're equipped with an S&B Filters particle separator. Order the model designed to fit your machine.
( 3 )
$399.00
—
$499.99
Memphis Audio offers direct-fit OEM subwoofers for a variety of applications, including many Can-Am and Polaris UTVs from 2017 and up. These speaker components are built to factory specs to ensure proper fit and performance. They're available in multiple power and mounting location options
( 2 )
$499.95
Extreme Metal Products offers your utility vehicle laminated safety glass windshields--just like the one in your car! These no-scratch windshields have a powdercoated, 14-gauge steel frame and hemmed edges for smooth, strong sides. They connect quickly and are easy to remove. EMP laminated safety glass windshields offer safety for your UTV.
( 21 )
$404.99
—
$499.99
Mororo intercooler tanks are direct bolt-in replacements for the factory tanks. They feature increased capacity and are manufactured from fabricated aluminum for maximum strength. The tanks also include a billet aluminum filler neck, Moroso racing cap in the stock pressure range, and integral billet aluminum hose fittings.
( 6 )
$444.99
On Sale
MBRP Sport slip-on mufflers are true performance exhausts for a wide range of ATVs and UTVs, including Honda®, Bombardier, Can-Am, Suzuki, Kawasaki, Arctic Cat, Yamaha, and Polaris. They deliver maximum flow, with a clean and crisp sound. The round 304 stainless steel canisters are black powdercoated, with round turndown outlets. Sport mufflers feature chambered internal construction for just the right amount of resonance. Order the model recommended to fit your all-terrain vehicle application.
( 11 )
$329.99
—
$514.99
$263.99
—
$411.99
Keep your UTV's air filter clean and engine protected with S&B Filters Powersports Particle Separators. A UTV's filter can clog quickly, robbing the engine of power. The S&B Powersports Particle Separators are a game changer—allowing UTV owners to maintain horsepower and torque by keeping their air filters cleaner for a much longer period of time. S&B designed this system large enough so that there is no loss in power when used with the factory filter system. By using the same technology military helicopters use to maintain power in extremely dusty conditions, S&B's Powersports Particle Separators remove 94 percent of dust from the airflow before it even reaches the stock filter. This dramatically extends the lifespan of your UTV's air filter, so you can maintain horsepower and torque for a much longer period of time. Don't let the elements get you down. Maintain power throughout you ride ... go further and go faster with the Powersports Particle Separators from S&B Filters! Product features and benefits: * Running the S&B Particle Separator is less restrictive than running without one—there is no loss of horsepower because your filter is not getting bogged down with dirt and debris, resulting in less restriction and maximum airflow * S&B Particle Separator removes 94 percent of dust from the airflow before it reaches your air filter to dramatically extend the life of your filter—this saves you time and money from constantly having to replace your air filter * Clean air is directed to your air filter while the scavenge fan ejects dust through exhaust * Centrifugal force spins the dust against the outer wall—clean air continues forward * S&B Powersports Particle Separator is designed to protect from water, snow, sand and fine dust to maintain power throughout your ride—just what a race-tuned UTV needs to finish faster with more power * Whisper quiet fan technology—when you're at idle or the vehicle's rpm is low, the fan speed is lower allowing you to talk and listen to music without hearing the fan; once you hit the gas, the scavenge fan instantaneously accelerates to provide maximum protection for your filter—it's the best of both worlds! * The Particle Separator's versatile billet clamps allow it to be installed in many positions on either the upper or lower roll bars of your UTV and accommodates most roof configurations * The Particle Separator integrates into the body of UTV Pro XP models for a factory fit and finish while allowing clearance for up to 40 in. tires, so you can say yes to all those other cool accessories while still protecting your engine * When installed on the upper roll bar, the Particle Separator allows your UTV to engulf more air—with this additional airflow, your engine will maintain its highest level of performance in horsepower and fuel economy
Not Yet Reviewed
$499.99
No more changing out your air filter daily, weekly or even monthly, when driving in extreme dusty conditions. By ejecting the dust in the air before it reaches the filter, the S&B Filters Particle Separator allows your air filter to last longer. As you drive, the dusty air enters the fixed vortex tubes that spins the air around and pushes the heavier dust to the outer walls. The S&B Filters Particle Separator replaces the entire stock intake box, tube & air filter. Most installs can be completed in less than 2 hours with no drilling required. It uses the stock filter minder, so you can quickly and accurately determine when your filter needs to be serviced. The quick access latches allow the air filter to be changed in less than 60 seconds without needing any tools.
Not Yet Reviewed
$499.99
Overland adventures demand reliable cargo space. With a Rough Country rear cargo rack kit, you can increase your UTV's storage capabilities without compromising bed space or dumping functionality. These rugged, heavy-duty steel racks are built to withstand any challenge, ensuring durability and strength through every adventure. Constructed from heavy-duty steel, the cargo racks boast a corrosion-resistant, powdercoat finish that protects against the harshest elements. No matter the terrain, the IP67 waterproof design ensures that your gear stays safe from water, dust, and dirt. The kits' versatile mesh pattern includes multiple tie-down points, providing flexibility to secure all your gear without worry. Enjoy a quick and easy setup with 100 percent bolt-on installation—no drilling, no cutting, just a secure, factory-like fit. Plus, the full dump bed functionality remains intact, so you can haul heavy loads or dump with ease. Whether you're navigating rugged landscapes or navigating daily tasks, Rough Country rear cargo racks provide unmatched reliability and toughness. With years of protection and a design built to last, they're the ultimate upgrade for your Polaris, Can-Am, or other UTV model. * (Optional LED Lights, available separately: Includes two pairs of 2 in. square flush mount Cree LED lights (Black Series)
Not Yet Reviewed
$499.95
On Sale
MBRP Performance Series exhaust systems maximize exhaust flow and minimize exhaust temperatures. They're manufactured from 100 percent aluminized steel and come standard with MBRP's smaller muffler. Fully sealed tubing adds years to your system, avoiding rust-through on seams. Performance Series units are road, track, and dyno-tested; and they're specially tuned to deliver an aggressive exhaust note. Order the model designed for your specific vehicle. Other features and benefits: * Fully mandrel-bent tubing and minimal bend degree angles increase airflow * Better gas mileage * Bolt-on, no-weld design for easy installation * Direct-fit to the OEM hangers; clamps and accessories included * Available for gas truck and diesel applications * Limited one-year workmanship warranty
( 45 )
$564.99
$451.99
On Sale
MBRP has developed a full line of ATV and UTV performance exhaust, including these Performance 5 in. slip-on mufflers. All systems feature stainless steel and billet aluminum construction and include USFS spark arrestors. Enjoy power gains, head turning sound, and eye-catching style with the MBRP Performance 5 in. slip-on mufflers designed to fit your ATV/UTV.
( 2 )
$504.99
—
$559.99
$403.99
—
$447.99
Buying what you need to get your truck, Jeep, or Side x Side out of a tight spot shouldn't put you in another. Rough Country winch mount plates offer peace of mind and the ability to become winch-equipped, so you can overcome off-road obstacles. Robust steel plate construction and a durable powdercoat finish allows the plates to withstand the elements. They are easy to install and will accommodate most winches. Outfit your vehicle for a winch without costly aftermarket upgrades. Choose the affordable Rough Country winch mounting plate designed for your vehicle.
( 2 )
$289.95
—
$439.95
On Sale
Tired of feeling the burn from your off-road machine? DEI Powersports heat control kits shield the heat and increase the riding comfort for you and your whole crew. The kits include precision-cut, adhesive-backed pieces that reduce console and seat temperatures, block radiant heat in the cup holder(s), and reduce engine noise and vibrations. Installation is straight forward, and no modifications are needed for installation. Choose the kit(s) designed for your ATV, UTV, or Side x Side.
( 2 )
$337.99
—
$351.99
$304.19
—
$316.79
Modal Header