Availability
On Sale
Stock vehicles are limited to tire height increases due to front tire-to-body contact. Rough Country UTV forged control arms unlock the full potential of your off-road machine with increased clearance. These 6061 forged aluminum forward offset arms eliminate limitations, allowing up to a 30 in. tire with no lift required! They are lightweight, durable, and easy to install. Choose the kit designed for your UTV. Features and contents: * 2 in. forward offset * 1.5 in. additional ground clearance * Installed greaseable ball joints * Greaseable A-arm bushings and sleeves * Driver and passenger upper and lower control arms * 90-degree grease fittings * Hardware
Not Yet Reviewed
$499.95
$224.96
—
$449.96
On Sale
Quadboss rear independent suspension repair kits keep your ATV/UTV A-arms and knuckle in fighting shape. Quadboss offers a variety of kits that contain all the components required to rebuild the upper and lower A-arm and/or knuckle. Features: * Needle bearing shafts are hardened, precision ground 52100 bearing steel * Self-lubricating acetal nylon bushings for better wear and performance * All metal bushings are case hardened and plated to prevent wear and corrosion
( 1 )
$60.13
—
$104.75
$54.12
—
$94.28
On Sale
Rough Country offers Vertex suspension lift kits for hundreds of trucks from the early 2000s and up—including models from Chevrolet, GMC, RAM, Ford, Jeep, and Toyota. Depending on the application, these kits enable you to raise the front and/or rear of your vehicle from 2 to 7.5 in. This is accomplished via component options such as steering knuckles, strut kits, coil springs, leaf spring blocks, spacers, torsion bar keys, and coilovers. Each kit features Vertex adjustable front and rear shocks for incredible ride quality on- and off-road. Suspension lift kits provide many benefits, including an aggressive stance, factory-like geometry, increased ground clearance, and plenty of ride height to accommodate larger tires. Installation varies from kit to kit. Hardware is included. Order the package recommended for your truck—and enjoy premium lifted performance and aesthetics.
Not Yet Reviewed
$1,299.95
$1,169.96
On Sale
Upgrade to Quadboss ball joint kits and put an end to premature joint failure. QB's heavy-duty ball joints offer more strength than the OE aluminum joints found on some machines. Their strong steel cases feature a POM-M90 bearing cup to isolate the ball end from the case to provide longer life. They include a snap ring and cotter pin and are available for many applications. Do you need replacement ball joints for your ATV/UTV? Quadboss will keep you bounding over track and trails--get some for your machine!
Not Yet Reviewed
$31.03
—
$50.43
$27.93
—
$45.39
On Sale
Quadboss A-arm repair kits come in upper and lower sets and will replace the bearings, seals, and necessary spacers to rebuild the A-arm to its previous glory! Nothing spoils a good off-roading trip like an A-arm technical issue. Get back out on the trail with your A-arms in top form with help from Quadboss A-arm repair kits.
Not Yet Reviewed
$9.69
—
$49.46
$8.72
—
$44.51
On Sale
Quadboss steering rack tie rod assembly kits are offered in a selection of kits to accommodate various Kawasaki, Polaris, and Yamaha models. The rod kit (outer only) contains one steel tie rod. Kits are also available for the driver side or for the passenger side. These kits consist of a steel tie rod end and shaft (connects to steering rack, as well as the outer tie rod end) and include a boot and necessary required hardware to facilitate installation.
Not Yet Reviewed
$104.75
—
$147.43
$94.28
—
$132.69
On Sale
Rough Country offers suspension lift kits for hundreds of trucks from 1980 and up—including models from Chevrolet, GMC, RAM, Ford, Jeep, Nissan, Toyota, and Dodge. Depending on the application, these kits enable you to raise the front and/or rear of your vehicle from 1.5 to 7.5 in. This is accomplished via component options such as steering knuckles, spacers, coil springs, leaf spring blocks, strut kits, and shackles. Suspension lift kits provide many benefits, including an aggressive stance, increased ground clearance, and plenty of ride height to accommodate larger tires. Installation varies from kit to kit; order the package recommended for your vehicle.
Not Yet Reviewed
$79.95
—
$159.95
$71.96
—
$143.96
On Sale
Stock springs don't always hold up to the weight of the work you need to do. Quadboss suspension springs add new life to your suspension and give you the support you need. These heavy-duty, high-quality chrome silicone springs are ISO certified. Customize your quad with these durable suspension springs from Quadboss and avoid bottoming out.
Not Yet Reviewed
$76.62
—
$82.44
$68.96
—
$74.20
On Sale
Quadboss provides the strongest design available for ATV/UTV tie rod end kits--comparable to automotive-grade wheel adapters! These ends are machined from aircraft-grade billet aluminum and extend your wheel width for increased stability and safety. Want larger aftermarket tires? No problem! Quadboss tie rod ends help prevent rubbing against shocks, struts, or exhaust systems. Each kit replaces one side and also includes two spacers and eight lug nuts. They're available for models such as Arctic Cat, Bombadier/Can-AM, Honda®, Kawasaki, Polaris, Suzuki, and Yamaha. Find your make and year... and upgrade today!
Not Yet Reviewed
$33.89
—
$72.74
$30.50
—
$65.47
On Sale
Quadboss swingarm repair kits assist you in rebuilding your swing arm bearing assembly. Why choose Quadboss? Because you want the best to do the job right the first time! These kits are available for specific UTV/ATV brands and models from the 1980s and up--including Honda®, Polaris, Kawasaki, Yamaha, Suzuki, Bombardier, and Arctic Cat. Kits include: * Needle bearing shafts made with hardened and precision-ground 52100 bearing steel * Case-hardened and plated metal bushings to prevent wear and corrosion * POM composite washer bearings replace thrust needle washers for increased service life and superior resistance to water and dirt
( 1 )
$39.76
$35.78
On Sale
Safety and stability are what ATV/UTV drivers covet with Quadboss tie rod assembly upgrade kits. You can ditch those failure-prone 10mm tie rod ends for heavy-duty 12mm ends manufactured from aircraft-grade billet aluminum. They extend your wheel width, allowing for larger aftermarket tires, while preventing rubbing against shocks, struts, or exhaust systems. Quadboss tie rods are crafted from seamless steel tubing. You can purchase two rods and four rod ends with all hardware together for a full conversion, or the end kits alone, which also include two spacers and eight lug nuts.
Not Yet Reviewed
$158.10
$142.29
On Sale
Quadboss offers steering rack assemblies in a variety of styles for fitment on many different ATV/UTV off-road vehicles. Each assembly comes with the rack, tie rods and inner tie rod ends to replace your worn or broken OE assembly—at a fraction of the price. These steering racks are compatible with OEM, Quadboss, and All Balls Racing tie rods, boots, and tie rod ends. (Outer ends are sold separately.) Order the kit recommended for your application.
Not Yet Reviewed
$250.25
$225.22
On Sale
Whether it's to turn heads, sling mud on a path less traveled, or simply to get extra clearance for those bigger tires, Rough Country M1 suspension lift kits offer amazing off-road performance at an incredible value. They are easy to install, and each kit includes the specific heavy-duty components and hardware needed for your truck's lift, plus Rough Country M1 shocks. Select the kit designed for your truck with the lift desired. M1 shock features: * 2 in. seamless extruded tube * 46mm digressive piston * Self-adjusting, deflective-disc independent rebound and compression * 18mm centerless-ground, case-hardened, chromed, and super-polished rod * 46mm monotube design ensures consistent, fade-free performance in all conditions * Digressive valving instantly reacts to changing surface conditions * Zinc plated for resistance against harsh elements * Durable vulcanized natural rubber bushings
( 1 )
$699.95
$629.96
On Sale
Rough Country's N3 coilover kits will improve your Polaris Rangers performance capability. The N3 coilovers help stabilize your vehicles movements, enhance control when you turn, brake, accelerate or ride over uneven road surfaces. Made for rugged off-road performance, the N3 shocks have a deflective disc damping system for a more stable ride, preserving the smooth ride quality you need. The N3 shocks offer spring height adjustment via the adjustable cam supporting the lower spring perch. The spring perch can be raised or lowered to suit each individual's needs. So, if you're looking to add a little extra clearance, and improved performance, Rough Country's N3 coilover kits are the perfect solution. Key features: * Excellent ride quality and performance * Spring height adjustable * Self-adjusting, deflective-disc independent rebound and compression * 12.5mm centerless-ground, case-hardened, chromed, and super-polished rod * Nitrogen-charged shock design ensures consistent, fade-free performance in all conditions * Durable silent block rubber bushings
Not Yet Reviewed
$399.95
$359.96
On Sale
Control Sway-A-Way coilover kits with compression adjusters by aFe feature race-winning engineering components with 20-plus years of testing—made into specifically designed kits that bolt directly into your vehicle. These kits offer adjustable ride height and Sway-A-Way's mid-speed compression adjusters for superior off-road damping curves without sacrificing any on-road comfort or handling. Sway-A-Way's 2.5 Series mid-speed compression adjusters mount directly into the remote reservoir. Offering 16 clicks of resolution, the compression adjuster can go from the unrestricted, fully-open (soft) position, to the fully-closed (hard) position—offering up to a 200 percent increase in damping force with just two full turns of the GF polymer adjuster knob. aFe Control Sway-A-Way coilover kits with compression adjusters are an excellent solution for any application in which weight often varies, or that might be used in a variety of terrains where a quick adjustment is desired for optimizing the comfort level of your ride. Refer to Applications tab to confirm fitment. Coilover shocks feature: * Bright, zinc plated steel cylinder bodies and CNC-machined aluminum components * Spanner wrench included for adjustments Speed compression adjusters feature: * Rebound damping remains unaffected regardless of setting and valving combination chosen * Constructed from billet 6061 T-6 aluminum * Red anodized and laser-etched housing is built to withstand the harshest of environments with excellent corrosion resistance * Metering piston is CNC-machined from 7075 T-6 aluminum to provide the best service life for high-speed applications
Not Yet Reviewed
$2,376.00
—
$3,117.00
$2,138.40
—
$2,805.30
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
