Availability
Showing In Stock Items. Show All 10 Items.
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1974 )
$140.95
—
$167.95
$126.85
—
$151.15
On Sale
Convert your OEM-style breaker points and condenser to the more reliable Unilite ignition from Mallory. These self-contained units have no moving parts to wear out, so they provide many years of trouble-free service. Simply replace the points with the Unilite module, which consists of a photo coupler, signal processor, and power switch. Each time the shutter wheel stops the infrared light from reaching the photo coupler, the electronic circuitry energizes the ignition coil. When the shutter wheel allows the light to reach the photo coupler, the stored energy in the coil discharges. These kits can drive both OEM and high-performance ignition coils, and are designed for 12 V negative ground systems.
( 6 )
$149.95
$134.95
On Sale
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 805 )
$114.95
$103.45
On Sale
Flowmaster tailpipe kits finish off your exhaust with high-quality mandrel pre-bent pipes. Available in 16-gauge aluminized steel tubing or 16-gauge 409 stainless tubing, Flowmaster tailpipe kits are designed to fit perfectly onto your vehicle with all the quality and performance you expect. These mandrel-bent tubes eliminate kinks in the bend area for improved exhaust flow plus it allows you to route hot exhaust out from under your vehicle, keeping it cleaner and safer without a loss in performance. Add Flowmaster tailpipe exhaust technology to your ride.
( 323 )
$275.95
$248.35
On Sale
ACCEL 300+ Ferro-spiral race wire sets are custom tailored for race engines and their builders. The oversize wire will stand up to extreme heat and voltage. Their outer layers also resist heat, along with chemicals and moisture, while the high-density insulation eliminates arcing. Leave the competition behind when you order the ACCEL 300+ Ferro-spiral race wire set designed for your application.
( 1 )
$176.95
$115.95
On Sale
Flowtech headers are designed to provide optimum exhaust flow for increased horsepower, torque, fuel economy, and improved throttle response. Leak-tested for maximum performance, they feature the industry's best welds for durability and are carefully engineered for precise fit. Available for a wide range of applications, they're offered in block hugger, competition, fenderwell, lakester, long tube, mid-length, shorty, upright, and turbo styles. Varying with the application, Flowtech headers are constructed from sturdy and lightweight cold-rolled mild steel or stainless steel for increased strength and durability. All tubing is mandrel-bent to provide consistent tubing diameter for smooth flow and increased exhaust velocity. Extra-thick, machined header flanges provide a leak-free seal and maximum strength. For long-term rust and corrosion-resistance, available finishes include natural and polished stainless steel, high heat-resistant black paint, or a satin silver metallic ceramic thermal barrier coating. All mounting hardware and premium gaskets are included. Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Hooker recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.
( 993 )
$290.95
$261.85
On Sale
Hooker Blackheart transmission crossmember hoops are part of the most comprehensive line of Gen III Hemi swap components available for the Mopar B-body. They allow the installation of the popular NAG1 5-speed or 8HP70 8-speed automatic transmission when used with the correct adapter plate. Hooker hoops replace the very narrow factory hoops on the original upper transmission crossmember allowing clearance for driveshaft coupler and speed sensor tone rings. When used in combination with the Hooker Blackheart transmission crossmember, they provide a bolt-in clearance solution with OEM strength and durability with no need for any fabrication or welding. Features include: * 1/2 in. steel upper hoop provides the necessary structural integrity when used with Hooker Blackheart transmission crossmember * No cutting of the transmission tunnel required * Uses the OEM mounting holes * Heavy-duty steel construction for strength and durability * Includes mounting bolts
Not Yet Reviewed
$225.95
$124.95
On Sale
Hooker Blackheart engine mount brackets are designed to bolt right in for ease of installation, provide excellent ground clearance, and optimize driveline angles, making your swap a good fit. The mounts are fabricated from steel to provide a strong and rigid foundation for your engine.
( 2 )
$280.95
$154.95
On Sale
Create a solid, luxury car feel and take the guesswork out of sound deadening with Dynamat Xtreme Custom Cut kits! They isolate vibrations, reduce heat, and stop noise for a cool, quiet, and comfortable ride. Custom Cut kits are made specifically for your application, precut to the exact sizes that you'll need for your vehicle's interior sheet metal or fiberglass. Dynamat Xtreme with Vector Chemistry is a patented sound deadener with a .060 in. layer of butyl and a .004 in. aluminum face. They provide the highest efficiency of sound deadening properties available. You'll experience better sound and bass from your music and eliminate annoying road noises. Simply peel and stick these self-adhesive Dynamat Xtreme kits to your interior surfaces for amazing results. Use them on doors, floors, hoods, trunks, and roofs for the ultimate in driving comfort! Dynamat Xtreme Custom Cut kits are offered for a variety of applications in a choice of coverage areas.
( 72 )
$133.95
—
$166.95
$120.56
—
$150.26
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
