Availability
Showing In Stock Items. Show All 527 Items.
Lares new (not remanufactured) power steering pumps are engineered to OE specifications to ensure proper fit, form, and function. They're manufactured from the same high-quality materials as your original components to provide long-lasting performance. Over a hundred models are available, with or without an included reservoir, for vehicle and engine applications from 1960 and up. Order the replacement pump recommended for your ride.
( 141 )
$136.99
—
$199.99
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1981 )
$140.95
$126.85
Whether you're looking to add amperage to your electrical system, or style to your engine compartment, we've got a Summit Racing™ alternator to help you accomplish your mission. Depend on Summit Racing™ to get the power you need and the space you crave.
( 919 )
$139.99
—
$171.99
You spend a lot of time inside your car. Overhaul the appearance of your interior by replacing worn, stained, or ripped factory carpet with a Summit Racing™ custom-fit molded carpet kit. Each kit is cut and tailored to your specific vehicle, making installation easy and avoiding extensive trimming. Summit Racing™ has partnered with the premier manufacturer of automotive carpeting to offer these kits in your choice of molded vinyl, cut pile, or nylon loop. They're available in popular factory colors to help you choose the look and feel desired. Whether it's your daily driver or a 100-point restoration, Summit Racing™ custom-fit molded carpet kits have you covered.
( 155 )
$197.99
Do you need service parts for your brakes? Whether your ride is stock or going lower, you can trust Summit Racing™ disc brake spindles. These one-piece steel disc brake spindles are great replacements for worn pieces. Summit Racing™ spindles make it easy to retrofit cars already equipped with OEM single-piston disc brakes or aftermarket kits that bolt to the stock disc brake spindles. Steering geometry remains unchanged, since they are direct bolt-ons to stock steering arms. For quality braking parts at a price that you can afford, choose Summit Racing™.
( 37 )
$169.99
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 1002 )
$100.79
The Right Stuff offers replacement brake rotors for a variety of applications in solid surface or cross-drilled and slotted styles. These rotors are made from high-quality materials to The Right Stuff's exacting standards for perfect fit and function, making them a great choice for your disc brake conversion. Order the model designed for your vehicle application.
( 118 )
$114.99
—
$215.99
Control arms are considered key components in your vehicle's suspension system. Hard usage or even a minor encounter with a curb, pothole, or speed bumps can bend, crack, or damage a control arm—which often leads to poor handling. Summit Racing Equipment® offers a range of front upper and lower control arms in your choice of stock or tubular styles. These factory-type replacements are designed to fit specific vehicle applications. Enjoy improved directional stability, handling, and a smoother ride with new control arms from Summit Racing™.
( 116 )
$223.99
Want to improve the performance of your ride, without a major hassle? QA1 Stocker Star shocks could be your answer. They're lightweight, fully adjustable, and bolt right in. They rely on deflective-disc valving and have 18 levels of damping, which you can select at the twist of a knob—with the shocks in place on the vehicle. Stocker Stars have 5/8 in. hard-chromed centerless-ground piston rods, double-lip wiper seals, and one-piece, forged, machined-aluminum bodies that are bright-anodized for great looks and durability. Each shock is dyno-tested for consistency and comes with chrome or zinc plated mounting hardware. Order the model recommended for your vehicle application.
( 345 )
$214.95
Get more power from a high-energy ignition than you ever expected with a brand new Summit Racing™ blueprinted HEI distributor. They feature a 50,000 V coil, medium weight advance springs, and an aluminum housing. The distributor shafts are guided by precisely aligned bushings for durability in extended street use, and most models include an adjustable vacuum advance. Separate advance springs are available, so you can fine-tune to your hearts content. Be in it to win it—with the Summit Racing™ blueprinted HEI distributor designed to fit your application.
( 1241 )
$229.99
Richmond Gear complete ring and pinion installation kits include Grade 8 ring gear bolts, bearings, seals, shims, marking compound, thread-locking compound, and silicone sealer. To ensure proper fitment, order the kit designed for your make/model application.
( 212 )
$146.99
—
$158.99
Lokar's Hi-Tech flexible braided stainless transmission dipsticks match right up with other Lokar accessories. They feature a flexible, heat-resistant PTFE rod with a braided stainless steel cover. The inner rod is stamped with appropriate trans-fluid levels, and the outer housing has a slim design that allows for mounting inside of the headers. These dipsticks are available in both firewall-mount and trans-mount styles, and a funnel adapter is included for assistance with filling. Order the length and other options preferred for your vehicle make and transmission application.
( 337 )
$138.95
—
$163.95
Motive Gear is the leading manufacturer of driveline products for just about any vehicle, whether it is a stock daily driver or a full-competition 4x4 or race car. They are proud to offer an unmatched selection of quality components engineered and manufactured for the vehicle and for the way it is driven. Motive Gear ring and pinion sets are engineered to meet or exceed OEM specifications at a price that won't break your budget. Their broad selection of ring and pinion ratios is available for just about every vehicle made from the 1940s through the present. All Motive Gear products meet strict quality standards through advanced manufacturing techniques and are backed by their strong warranty. Their in-house quality control lab utilizes state-of-the-art equipment to continuously check Motive Gear products for strength, tolerance, and hardness. Only after meeting stringent quality standards are Motive Gear products packaged and ready for delivery.
( 283 )
$161.99
—
$215.98
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 295 )
$185.65
PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems
( 208 )
$138.99
Summit Racing™ offers clutch kits to fit thousands of vehicle applications. These stock-style replacements are engineered to OE design and performance standards. They will work in tandem with your transmission to deliver smooth gear shifts and an enjoyable ride. Besides the quality product, Summit Racing™ clutch kits present a fantastic value. Order the model recommended for your car, truck, Jeep, or SUV.
( 94 )
$166.99
—
$206.99
Summit Racing™ offers Extreme Performance coated brake rotors for thousands of vehicles, from the 1960s and up. They're manufactured on CNC machines using CAD-CAM design for perfect balance and alignment, then coated with silver zinc to resist corrosion. These rotors provide you with maximum stopping power, reduced warping, and longer life. The cross-drilled holes and slots provide an exit route for gasses and dust, resulting in better heat dissipation and less brake fade under hard use. Other solid-surface rotors allow gasses to create a cushion between the pad and the brake rotor, resulting in poor brake performance. The cross-drilled holes and slots clear away harmful gasses, restoring full pad-to-rotor contact. These coated rotors are a terrific performance upgrade when replacing your brakes. Order the model recommended for fitment on your vehicle.
( 68 )
$159.98
Finally, a 90/10 that's easy to pull apart! Calvert Racing CF Series 90/10 shocks deliver lightning quick separation! Specifically designed for maximum weight transfer, these suspension components feature dual-stage valving on compression to allow your car to settle on the top-end. They are cost-effective, lightweight, and available for a wide range of vehicles from the 1950s and up.
( 38 )
$150.00
Powermaster OEM-style high-torque replacement starters look like your OE starter, but pack a hidden surprise of high-torque cranking power! How do they do it? Easy--they combine an electric motor that is much stronger than a stock starter, high temp solenoid, and direct drive for serious torque. Hardware is provided for some applications, and some models also come available in a chrome plated finish.
( 547 )
$164.99
—
$238.99
Clearance
Motive Gear master ring and pinion installation kits include everything that's in their regular differential kit—plus pinion shims, carrier shims, and ring gear bolts (where applicable). You also have the option of upgrading to higher quality bearings by adding "T" to the end of the part number on some models. Make a better choice for your ring and pinion installation with Motive Gear differential master bearing kits. Order the model designed for your vehicle application.
( 341 )
$105.99
—
$154.99
A Tuff Stuff Performance high-amp output factory cast-plus alternator is just what every ride needs. These units produce the most power at idle to keep your battery fully charged at all times. Tuff Stuff products are hand-built with the best bearings, diodes, and copper windings available; and the cast-plus finish is applied in the company's Cleveland, Ohio factories. This leaves a natural cast look but offers extreme durability from pitting. The alternators are available in a variety of amperages, case and pulley styles for fitment on thousands of specific vehicle applications.
( 731 )
$115.99
—
$156.99
Do you need to modify the trans tunnel on your 1964-72 GM A-Body to make room for a T56, TKO, 4L80, 6L90, or 8L90 transmission? Tin Man Fabrication makes it easy with floor tunnel panels designed to fit your specific application. These aren't generic universal pieces like others on the market; Tin Man tailors each transmission panel to be as compact as possible, allowing use of the stock consoles.
( 15 )
$176.99
Summit Racing™ Electronic Distributor Conversion kits allow you to Convert your factory single point distributor to a true 1 wire solid state ignition. Simply remove and replace your points and condenser with the solid state breakerless ignition module. Simple stealth 1 wire hookup is perfect for 100 point type restorations as it is undetectable. Never deal with breakdowns or adjusting worn or burned points again with a Summit Racing™ Electronic Distributor Conversion kit. • 1 Wire Hook-Up, just connect to the original points wire • Completely stock appearing • Fits inside 57-74 Delco Window cap distributors • Auto-standby prevents coil damage or dead battery if the ignition is accidentally left on • Active dwell control maintains high rpm spark energy while reducing coil heating at idle. • Hall effect rotary-vane sensor design compensates for worn bearings and distributor end play. • Magnetic sensor is unaffected by oil, dirt or other contaminants, unlike optical systems. • Over-voltage/over-current protected against damage from high amp battery chargers, reversed battery, or improper wiring • No distributor modification, disassembly, or removal is required , use SUM-RP20594 For New Repl. Black Ground Wire To Finish The Conversion.
( 13 )
$167.99
On Sale
UMI Performance front sway bars are designed to reduce body roll and under-steer and increase corning capabilities, resulting in a more balanced suspension. These front sway bars are more rigid than the factory originals and will bolt directly in place with no modifications. Each kit includes new Energy Suspension end links and greaseable sway bar bushings with new zinc plated clamshells. Nearly two dozen models are available for vehicles from 1963 and up; order the sway bar recommended for your application.
( 101 )
$259.99
$233.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
