Availability
Showing In Stock Items. Show All 15 Items.
There's a lot riding on your brakes, so as part of your regular maintenance, replace worn or damaged rotors with these quality upgrades from Summit Racing™. They provide a clean, true contact surface needed for effective braking and long pad life. These stock style rotors are designed with a non-directional finish for improved braking power, high durability, excellent pedal feel, and reduction of brake noise, while their machined non-friction surface ensures optimum balance and fitment. If you want predictable braking, install Summit Racing™ brake rotors—available for fitment on a variety of makes and models.
( 21 )
$69.99
These Summit Racing™ remote oil filter kits include a bypass adapter, filter mount, 8 ft. of oil hose, barb fittings, stainless steel hose clamps, mounting hardware, and instructions. These kits require a Fram PH8A or equivalent oil filter, which is not included.
( 188 )
$60.99
—
$74.99
Summit Racing™ high-output 4-pin HEI performance modules feature a longer dwell time for better coil saturation. This equates to a hotter spark and better performance for your HEI setup.
( 13 )
$55.99
Some people want a chrome pan, while others want a plain-Jane bare pan. No matter which style you like, Summit Racing™ stock replacement oil pans are perfect stamped steel OEM-style replacements. Most come with a stock baffle, a stock pump location, and a drain plug.
( 968 )
$97.99
Need better temperature control? Summit Racing™ Classic OEM heater cores will get your heater and defroster functioning properly once again. Designed to perform and built to last, our heater cores feature either aluminum or copper/brass construction and high-strength alloys to resist corrosion to serve you longer. They also offer an OE fit to make your installation easier. Keep your vehicle cabin warm with Summit Racing™ Classic OEM heater cores.
( 252 )
$67.99
—
$83.99
Summit Racing™ offers drag race shocks and struts for countless vehicles from the 1950s and up. They're available in a variety of styles for front and rear applications—including 90/10, 70/30, and 50/50. A 70/30 strut extends faster than it contracts, meaning faster front-end lift but longer to settle back down. 90/10's will lift your front-end very fast and settle it back down slowly, keeping the weight transferred to the rear tires much longer than the 50/50 models. Order the drag shocks and struts recommended for your racer.
( 11 )
$61.99
—
$62.99
These Summit Racing™ exhaust gaskets are made from thick copper, and feature an embossed ridge around the exhaust port for a tight, leakproof seal. The copper gaskets help even out the flow between the head and header flange to minimize warping. Also, they'll conform to rough or irregular surfaces to maintain a positive seal, while keeping the header bolts tight.
( 208 )
$52.99
On Sale
Summit Racing™ offers reproduction wiring harnesses for a wide selection of vehicles, particularly classic cars and trucks from the 1960s and '70s. These replacements and/or extensions are used to power a variety of applications—including horn, glove box, console, backup lights, engine; forward, hood, and courtesy lamps; fuel tank sender, and more. These OE style replacement harnesses are made of high-quality Automotive Grade Wire using factory style fuse blocks, plug ends, and wire colors to ensure factory type fit, performance, and durability. For repair or restoration, order the harness recommended for your specific car or truck. Note: These harnesses are factory replacements and do not include instructions or wiring diagrams refer to the factory diagrams and or service manuals for your specific vehicle.
( 52 )
$57.99
—
$108.99
Summit Racing offers power door lock switches for a wide range of vehicles—including 1970s models from Chevrolet, Oldsmobile, Buick, and Pontiac. These high-quality replacements facilitate the ups-and-downs of door lock operation. They're designed to meet all OEM specifications and install in the stock location. Order the switch recommended for your application.
Not Yet Reviewed
$67.99
Summit Racing™ Our Direct Fit Chevrolet and GMC Truck Reproduction Battery Cables are Made In The USA using the original GM specifications to insure a perfect fit. All of our battery cables are upgraded with High Performance Cross-Linked Polyethylene type insulation rated at 125C and are nearly impervious to oils, fuels, chemicals and typical engine temperatures unlike the PVC insulation type cables used during production. They are guaranteed to fit and outlast your OEM battery cables. They include any factory installed convoluted conduits, looms, insulating sleeves, mounting clamps, correct size side post bolt hex head on the battery terminals and appropriate angled ring terminals for that perfect routing and fit. Our battery cables are not service type assemblies designed to replace the factory installed cables. They are built to match the original cables GM installed when the trucks were new. The molded-on insulator on the side-post battery terminal end of the cables are molded in Red for positive and Black for negatives to original GM standards using upgraded Thermoplastic Elastomer components instead of PVC for long life. Truly the finest battery cables available.
( 10 )
$78.99
—
$107.99
Summit Racing brings you our ultimate ignition wire with our 8.5mm 50ohm wire sets. They are made with 100% high tear resistant silicone construction, a 50ohm per foot Wire-Wound FERRITE magnetic suppression core, stainless steel and brass terminals and extreme heat-resistant boots. Only the highest quality raw materials and Made in the USA workmanship, go into every set. The 100% High-Tear resistant silicone jacket protects the inner ferrite core from heat breakdown. The dual silicone layers are bonded together using a tightly woven fiberglass matting that virtually eliminates terminal pull off. Our 50-ohm ferrite core has over 3 FEET of nickel/copper mag winding per INCH! With this tightly wound core, you can be assured that your spark plugs are getting all the power your ignition system can provide. Stainless steel terminals with Posi-lock hardened clips and brass terminals are used on all applications; for superior connection and consistent voltage delivery. High heat silicone and high dielectric strength polymers make up the extreme composition of the spark plug boots. Our boots provide superior radiant heat resistance for longevity and high dielectric strength properties to prevent voltage leakage. With all of these features built into our Race-proven 8.5mm 50-ohm sets, you can be assured that installing one of these sets on your engine will give you all the performance and durability you have come to expect from Summit Racing products.
( 196 )
$79.99
The Right Stuff offers you the best-fitting, most exact reproduction fuel lines on the market. They utilize state-of-the-art CNC benders and automated end-forming machines that double-flare lines with remarkable consistency. The Right Stuff front to rear fuel lines are available in OEM steel or stainless steel, as well as various diameters and configurations for direct-fit replacement on hundreds of vehicles.
( 160 )
$133.99
—
$136.99
Summit Racing™ offers neutral safety / backup switches for a wide selection of vehicles, particularly classic cars from the 1960s. They're made of high-quality plastic to ensure long-lasting performance—and include a stock OEM-type connector for fitment on many applications. Order the model recommended for your ride.
( 4 )
$63.99
—
$70.99
Summit Racing Equipment® offers wiring harnesses for a wide range of vehicles—including many Chevrolet, Pontiac, Oldsmobile, and American Motors models from the 1960s and '70s. The factory-style replacement harnesses are ideal for restoration and upgrade projects. They are available to connect and power up a variety of dashboard and accessory functions. Order the wiring harness recommended for your application.
( 3 )
$77.99
—
$95.99
Summit Racing™ offers Extreme Performance coated brake rotors for thousands of vehicles, from the 1960s and up. They're manufactured on CNC machines using CAD-CAM design for perfect balance and alignment, then coated with silver zinc to resist corrosion. These rotors provide you with maximum stopping power, reduced warping, and longer life. The cross-drilled holes and slots provide an exit route for gasses and dust, resulting in better heat dissipation and less brake fade under hard use. Other solid-surface rotors allow gasses to create a cushion between the pad and the brake rotor, resulting in poor brake performance. The cross-drilled holes and slots clear away harmful gasses, restoring full pad-to-rotor contact. These coated rotors are a terrific performance upgrade when replacing your brakes. Order the model recommended for fitment on your vehicle.
( 69 )
$51.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
