Availability
Showing In Stock Items. Show All 65 Items.
Simplify your tune-ups and keep them budget-friendly with our Summit Racing™ cap and rotor kits. These affordable kits are molded from premium materials and have brass or aluminum inserts depending on application.
( 379 )
$27.99
—
$41.99
On Sale
ACCEL SuperStock coils are excellent high-performance coils. They're designed with optimized low resistance and a high turns ratio, for higher energy output. This also results in quicker starts, improved throttle response, and more high-rpm power.
( 93 )
$45.98
$35.35
Failure or poor performance from a coil can result in a misfire, a rough-running, hard-starting engine, and excessive emissions. ACDelco ignition coils provide the performance needed to help keep vehicles running the way that they were designed. These coils have corrosion-protected laminations to guard them from the harsh operating environment. Primary and secondary coil windings often feature molded plastic protection. Order the replacement model designed for your vehicle and engine application.
( 28 )
$33.99
—
$49.99
Your distributor will need upkeep to run at top performance. MSD Street Fire cap and rotor kits can help maintain its optimum operation. Manufactured with brass terminals and a heavy-duty rotor, these MSD kits offer big performance at a not-so-big price. MSD Street Fire cap and rotor kits are available for several GM and Ford applications. So, if you're in a budget frame of mind, choose quality-built MSD Street Fire cap and rotor kits.
( 138 )
$48.96
Moroso advance curve kits have three sets of advance springs, which allows you to adjust the rate of spark advance from quick, to super-quick, to ultra-quick. Each weight and centerplate is precision-stamped with smooth edges to eliminate erratic timing. Each kit comes complete with installation instructions.
( 44 )
$21.99
Our Summit™ high-output ignition coils give you additional volts of spark energy in a simple, direct replacement package. These coils mount in the stock location with no special mounting needed, but have a lower primary resistance, higher rpm capability, and greater output than stock. They're available in a variety of styles, both universal and application-specific, and can be ordered individually or in sets.
( 371 )
$27.99
—
$43.99
MSD Chevrolet distributor O-ring kits are designed to fit onto the lower shaft of the distributor, just above the gear. They are made of high-grade rubber and will keep the distributor shaft securely in place at operating rpm.
( 4 )
$21.58
Looking for a good cap and rotor for your HEI distributor? These Pertronix caps and rotors are made from a high-dielectric, 60 kV-rated alkyd molding compound to minimize crossfire and "arc-thru." They include nylon rotor hold-down screws, a low-resistance coil brush for a more efficient spark, and brass terminals for a long life.
( 11 )
$45.60
—
$46.15
ACDelco GM Genuine Parts distributor caps are a GM recommended replacement for your vehicles original component. These original equipment distributor caps have been manufactured to fit your GM vehicle, providing the same level of performance, durability, and service live you expect from General Motors.
( 35 )
$34.99
Is it time for a tuneup? Replace your distributor's worn-out cap with a new one from Standard Motor Products. Why take chances with old, questionable, or faulty ignition components that can leave you stranded? Standard Motor replacement distributor caps are designed to exceed OEM specifications for dependable, maintenance-free operation. Order the model designed for your specific vehicle application.
( 114 )
$20.99
—
$22.97
These Proform adjustable vacuum advance canisters allow you to fine-tune your vacuum advance for optimum performance.
( 18 )
$20.99
MSD tach drive adapters are designed to fit MSD distributors using the 3/16 in. tang drive cable. They are made of bronze, and feature a 0.104 inch square drive (Corvette style) drive cable end adapted to the 3/16 in. tang drive used on all tach drive MSD distributors.
( 13 )
$28.57
MSD low-resistance HEI bushings prevent excessive heat buildup. The carbon rotor button in a stock HEI distributor cap has very high resistance. When the high voltage of an MSD 6, 7, or 8 Series ignition is added, this resistance builds up heat and can actually melt the distributor cap. To solve this problem, install one of these MSD low-resistance HEI bushings, which will pass the secondary voltage from the distributor cap to the rotor without the excessive heat buildup.
( 15 )
$24.25
For great firepower, you need all of the spark that you can get. and Davis Unified Ignitions cap and rotor kits from Performance Distributors will give you every jolt that you need. These quality high performance cap and rotors offer up to 50 percent higher dielectric strength and can handle all available voltage. Manufactured using the ideal resin material to handle any system, these rotors have an improved well design to eliminate burn-through, nylon rotor screws to eliminate a "ground" for the voltage to jump at high rpm, and brass terminals on the cap to give you maximum conductivity. These cap and rotor kits are available in a wide selection, including Vortec applications. Plus, many are available in several color choices. Spark your ride into action with Performance Distributors cap and rotor kits.
( 157 )
$37.50
—
$41.75
Proform offers these high performance ignition modules for a variety of applications.
( 17 )
$34.99
Got a GM HEI ignition that's feeling kind of weak-kneed lately? Proform's epoxy-filled GM HEI ignition coils could be the answer to your problem. They replace the stock distributor-mounted HEI coil and crank out a hefty 50,000 V of plug-firing power. That's 15,000 V higher than the OE coil, which results in more completely burned fuel and better all-around performance.
( 3 )
$40.99
Eliminate tach signal noise and surges caused by your ignition system with OER Authorized tachometer filters. These components are recommended for vehicles running a tachometer designed for points-style ignitions for a crisp and cleaner signal and install between the tachometer and the ignition trigger source. The tach filters are designed to trap, redirect, and dissipate the high-voltage spikes and surges that are emitted by any late model, high-energy ignition system. The filters also modify the sharp up and down spikes into a semi-square wave signal for steady readings and faster pointer response.
( 2 )
$47.99
Don't take chances with old or questionable vacuum advance canisters that can leave you stranded. Standard Motor Products vacuum advance canisters are designed to meet or exceed OEM specifications for accurate, maintenance-free operation. Trust your vehicle's needs to Standard Motor Performance quality replacement parts.
( 20 )
$21.99
MSD distributor rotors are molded from high-quality, voltage-insulating Rynite or alkyd materials to resist carbon tracking, while ensuring that the ignition spark reaches the spark plug terminals. For optimum voltage-carrying capabilities, the rotor tips are made from low-resistance brass.
( 151 )
$21.58
—
$33.73
Dial in spark advance with Moroso adjustable vacuum advance kits. They allow you to change the amount of ignition vacuum advance for maximum part-throttle performance while preventing harmful effects of detonation--spark knock. These kits can be adjusted as conditions permit; add more for improved throttle response and fuel economy under light loads or less for high loads and high compression engines to eliminate knock. Vacuum advance kits have a built-in stop to prevent the adjustment screw from "backing out" and include Allen wrench and easy-to-follow instructions for a no-hassle install. Get dialed-in for a better run with Moroso adjustable vacuum advance kits.
( 5 )
$43.99
Don't take chances with old or questionable ignition coils that can leave you stranded. Standard Motor replacement ignition coils are designed to exceed OEM specifications for accurate, maintenance-free operation. They're offered in a variety of styles, such as coil pack, canister, and E-core; and these direct-fit coils are available to replace a wide range of factory part numbers/applications.
( 83 )
$20.99
—
$38.97
Breaker point ignition systems were, until the advent of electronic ignition systems, used on millions of engines. ACDelco Gold distributor points allow you to replace worn out points with premium aftermarket quality that offers the ideal fit and performance. Replace them with top quality materials from ACDelco Gold--so you know they'll fit and last.
( 12 )
$20.99
—
$27.99
These MSD vacuum advance mechanisms are designed to replace the vacuum advance chamber on the MSD HEI distributor. They are made of steel and feature cadmium plating for maximum durability.
( 7 )
$40.49
Don't take chances with an old or questionable ignition control module that can leave you stranded. Standard Motor Products replacement ignition control modules are designed to exceed OEM specifications for accurate, maintenance-free operation. Trust your vehicle's ignition needs to Standard Motor Performance.
( 39 )
$30.99
—
$45.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
