Availability
Injector Dynamics ID1300x fuel injectors are high-flow models with characteristics specific to the needs of motorsport tuners. You get superior flow without sacrificing idle and cruising performance in low fuel demand situations. This perfect balance between reliability and performance makes the 1300x Series one of the most popular options in today's motorsports. These injectors not only work with gasoline, but any ethanol fuels your engine is tuned for. The stainless internals prevent corrosion, add durability, and provide dependable flow in high performance engines. Order the ID1300x fuel injectors recommended for your vehicle.
( 1 )
$1,890.00
On Sale
JET Powr-Flo throttle bodies are direct replacements for factory units, and can be used to replace a worn-out throttle body or to upgrade your existing throttle body. They provide increased airflow for improved throttle response by taking advantage of JET's unique inlet design, and they include all new pre-installed calibrated electronics to allow for a simple "remove and replace" installation. JET Powr-Flo throttle bodies increase air velocity to the intake manifold, improving throttle reaction and provide horsepower throughout the entire rpm range. Order the JET Powr-Flo throttle body compatible with your vehicle.
( 110 )
$389.96
$350.96
Fel-Pro fuel injector O-ring sets help maintain performance vehicle. These replacement rings are engineered to offer a good, tight seal and prevent fuel leakage into hot engine compartments. Over time, your factory O-rings can become worn or cracked—leading to erratic fuel injection. Update the small accessories with the Fel-Pro set recommended for your vehicle and engine application.
( 10 )
$3.99
On Sale
K&N 63 Series Aircharger high performance cold air intake kits are designed to eliminate air path restriction and deliver a massive amount of air into your engine, resulting in more power. These kits are guaranteed to increase horsepower. They are engineered for specific vehicles to replace the OEM setup, including those with computer systems. The air filter element is washable and reusable, lasting up to 100,000 miles before service is required (driving conditions dependent). Where applicable, protective heat shields and hardware are included with installation designed to use factory holes and mounting points for easy installation. The air must flow—and it will when you order the K&N 63 Series Aircharger cold air intake kit best suited for your application!
( 602 )
$367.99
—
$419.99
$317.99
—
$369.99
On Sale
K&N's universal performance air filters are designed and manufactured for a wide variety of applications, including racing vehicles, radio-controlled cars, generators, snowmobiles, tractors, and more. Many hundreds of models are are available, so regardless of the angle or offset diameter of your air intake, there is likely a K&N universal air filter for your equipment. All filters are constructed with ultra-strong, molded, pliable rubber flanges, which absorb vibration, allow for secure attachment, and can be stretched for up to 1/16 in. (1.5mm) to fit in-between sizes. K&N universal air filters are washable and reusable. Order the style and size that best suits your needs.
( 310 )
$78.99
—
$94.99
$63.19
—
$75.99
Injector Dynamics ID1050x fuel injectors are a built-to-spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. Built on the evolution of the ID1000 and X Series, these injectors are a drastic improvement over previous series from Injector Dynamics. Order the set recommended for your vehicle. Features include: * Requires only 8 V for consistent operation at 8 bar * Corrosion resistance makes them compatible with all automotive fuels * Compact bodies allow fitment in over 200 applications * Improved internal flow path—without sacrificing low flow performance * Stronger magnetic circuit offers stable operation up to 10 bar * Replaceable inlet filter extends service life
( 8 )
$1,092.00
Deter fuel theft and vandalism with some help from MotoRad Products. These MotoRad locking gas caps offer OEM-quality construction and materials and a famous maker lock cylinder with two keys. MotoRad locking gas caps are available in push-on, threaded, and quick-on styles, depending on your application.
( 9 )
$10.99
—
$19.99
Standard Motor offers fuel pumps for hundreds of applications. These direct-fit OE replacements are designed and manufactured to stringent quality standards. Premium components and durable materials withstand harsh engine conditions to increase longevity and performance. Order the model recommended for your vehicle.
Not Yet Reviewed
$696.99
On Sale
Spectre Performance cold air intake kits provide better acceleration and fuel economy for your truck or SUV. They're designed to replace your factory air filter and air box assembly, eliminating the restriction as they smooth and straighten airflow. The high-flow design of these intakes enables your engine to breathe in a larger volume of air, resulting in more usable power throughout the engine's entire rpm range. Hundreds of models are available, with various tube and filter options. Choose the kit tailored for fitment and performance on your make/model application.
( 834 )
$199.99
$174.99
MotoRad has you covered if you lose or damage your fuel cap. These OE replacement-type fuel caps are a direct fit for your application. They will ensure that you get a proper seal to prevent any fuel loss or evaporation.
( 26 )
$5.99
—
$12.99
The next generation of air intakes is here! aFe Momentum GT Pro Dry S air intake systems use the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. Features and benefits of aFe Momentum GT Pro Dry S air intake systems include: * Custom, CAD-designed, roto-molded housing made from heat soak-resistant material--eliminates multiple components and ensures the coolest air intake charge possible * A large, clear sight window allows for filter inspection without removal of the air box * High-quality plastic, dyno-tuned intake tube for maximum power gains * Designed around the largest filter possible to allow optimum performance and filtration * Pro Dry S performance air filter features 3-layer, progressively finer porosity synthetic media--with a 100 percent polyurethane frame for long life and multiple cleaning cycles
( 65 )
$420.00
—
$433.00
UREMCO fuel injector O-rings enable you to avoid leaks when replacing or servicing your fuel injectors. They're made from quality materials to resist high temperatures and chemical exposure for reliable, optimum performance. The O-rings are available for a variety of applications. The direct replacements meet or exceed OEM specifications—and are highly recommended whenever fuel injectors are swapped out. Order the model and quantity needed for your vehicle.
( 5 )
$12.99
S&B Filters cotton filter cold air intake kits are designed to improve airflow and bring down the temperature of the air that enters your engine. To achieve more airflow, S&B oiled cotton filters are built with four layers (or eight for diesels) of the highest-quality cotton gauze. They use deeper, wider pleats with more per filter. Plus, their manufacturing process yields almost no "bleed", creating a greater open surface area. All of this adds up to more airflow with excellent protection. The filter elements are washable, reusable, and will protect your engine from harmful dirt and debris. Gain performance and a sporty, high-tech appearance under the hood of your rig with an assist from the S&B Filters cotton filter cold air intake kit best suited for your application. More product features, items, and specifications include: * Silicone rubber (not urethane) filters and couplers help ensure they won't degrade or crack, while resisting temperatures as high as 400 degrees F * Helps balance air/fuel ratios to improve gas mileage * Cross-linked intake tube minimizes restriction * Custom air box (where applicable, including some with clear lids) keeps loose dirt and turbulent underhood air out of your intake * Specific year, make, and model design makes them simple to install, with help from the easy-to-use installation instructions and illustrations * Included mounting hardware for replacing your stock assembly in 30 minutes or less in most cases
( 437 )
$349.00
On Sale
K&N 57 Series FIPK cold air intake kits are designed to eliminate air path restriction and deliver a massive amount of air into your engine, resulting in more power. These fuel injection performance kits are guaranteed to increase horsepower. They are engineered for specific vehicles to replace the OEM setup, including those with computer systems. The air filter element is washable and reusable, lasting up to 100,000 miles before service is required (driving conditions dependent). Where applicable, protective heat shields and hardware are included with installation designed to use factory holes and mounting points for easy installation. The air must flow—and it will when you order the K&N 57 Series FIPK cold air intake kit best suited for your application!
( 767 )
$367.99
$317.99
Have you always wanted a cold air intake with a disposable filter--without sacrificing performance? S&B Filters dry filter cold air intake kits offer airflow comparable to their cotton filters with the same great protection. They typically last for 15,000 miles of highway driving and you can extend the life of the filter by blowing it out with compressed air (up to three times). Your rig will not only gain performance, but also a sporty high-tech appearance under the hood. In addition, the filters and couplers are made with silicone rubber, not urethane, to help ensure they won't degrade or crack and can resist temperatures as high as 400 degrees F. These intake kits are simple to install, and the great looking signature clear lid allows visual inspection of your filter at all times. Remember, there are good air intakes … and then there are the better intakes--demand the better; choose the efficiency and style of S&B Filters cold air intake kits. Features include: * Helps balance air/fuel ratios to improve gas mileage * Specially-crafted cross-linked intake tube minimizes restriction * Custom air box keeps loose dirt and turbulent underhood air out of your intake * Custom-made for your specific year, make, and model * Easy-to-use installation instructions and illustrations * With the included mounting hardware, replaces your stock tract in 30 minutes or less
( 61 )
$349.00
Summit Racing™ tethered fuel tank caps give you the OEM quality and fit without the price. These caps fit applications originally equipped with a tether and come preassembled for easy installation. They're made from durable materials for longevity and are available in multiple colors. Order the replacement fuel cap recommended for your vehicle.
( 10 )
$10.99
—
$12.99
Agility Auto Parts offers a complete line of fuel module assemblies covering a wide variety of North American vehicle applications. Engineered and manufactured in a highly automated and dust-free environment, they meet or exceed all OEM specifications for fit, form, and function. Premium quality is ensured through stringent performance and reliability testing for pressure characteristics, flowrates, electrostatic discharge, and leaks. Agility Auto Parts fuel pump module assemblies include all the necessary components for a drop-in replacement right out of the box!
( 16 )
$138.99
—
$244.99
The next generation of air intakes is here! aFe Momentum GT Pro 5R air intake systems use the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. Their one-piece sealed housing with an auxiliary air scoop is designed to eliminate the use of multiple housings and ensure the coolest air intake charge available. A urethane plug is also included for those cold-weather applications where you want to block off the auxiliary air scoop. These systems feature premium stainless steel T-bolt clamps and a 2-ply, reinforced silicone coupler at the throttle body for increased strength and durability. They also include a 5-layer washable and reusable Pro 5R air filter. Experience maximum horsepower gains, huge low-end towing power, increased torque, and a throaty, mean growl for your performance machine with the Momentum GT Pro 5R air intake systems from aFe.
( 100 )
$408.00
—
$420.00
On Sale
K&N washable lifetime performance air filters are designed to increase horsepower and acceleration while providing excellent filtration. K&N makes over 1,400 different replacement air filters for virtually every vehicle on the road. These filters are washable and reusable--and are custom-designed to fit into your existing factory air box. Their drop-in design means that adding performance is simple. With most vehicles, you simply remove the disposable air filter and replace it with one of these K&N air filters. Find the model designed for your specific vehicle application.
( 1159 )
$68.99
$55.19
If your vehicle spends the majority of its time on the street, and you desire to maximize airflow, then aFe Pro Dry S air filter elements are your best bet. These synthetic oil-less filters feature multiple layers of progressive media for optimum filtration and flow, even when dirty. The filters bump seals eliminate the need for sealants or gaskets since they conform to the filter housings and always return to their original form. Full 360-degree urethane frames allow proper OE fitment and strength. These air filter elements are available in a variety of styles and sizes for countless applications. For more airflow, and less mess, order the air filter element for your application needs.
( 121 )
$93.00
aFe Dynamic air scoops deliver high-speed airflow to improve your vehicle's performance and throttle response. The scoops are available in lightweight powdercoated aluminum for a clean appearance, as well as plastic and a high-gloss, clearcoated twill weave carbon fiber that offers great strength, less weight, and aggressive looks. Any of the aFe choices install easily with the necessary hardware included—and will lower intake air temperatures by forcing more cool air from your front grille into your intake system. The scoops are available in a variety of configurations for fitment on specific vehicle applications.
( 11 )
$38.00
Delphi fuel pump module assemblies are nickel plated with all-steel internal components. They feature internal guide rod springs and external rubber feet for enhanced stability and reduced noise from vibration. These fuel pumps have little flow or pressure variation in hot fuel situations. Delphi fuel pump modules are designed to be OE replacements.
( 254 )
$234.99
—
$681.99
Fram Extra Guard air filters help keep damaging particles from entering your engine and causing increased wear. They feature a dry paper element with a standard screen for durability. These air filters are designed to keep your engine running at peak performance under any driving conditions. When you're ready to replace your present air filter, order the Fram Extra Guard air filter designed for your year, make, and model.
( 82 )
$16.94
Summit Bucks
Regular replacement of engine air filter elements is important for you and your car. Air filters trap airborne particles before they enter the engine. Excessively dirty filter elements decrease engine performance and increase fuel consumption. ACDelco Gold engine air filter elements use world-class filter technology to block 99 percent of airborne dust and dirt that can harm your engine--and they're available in panel and round styles to fit most vehicles. Benefits include: * Excellent filter capacity, enhanced efficiency, consistent flow management, and high durability for outstanding performance * The ability to trap microscopic dirt that can damage cylinder walls, pistons, and piston rings * Tight seals that help prevent unfiltered air from entering your engine * Sizes to fit virtually every car, light and heavy-duty truck, and SUV on the road today * Availability for virtually all makes and models * 12-month/12,000-mile limited warranty Round-style filters also feature: * A fine mesh screen to help reduce the risk of fire caused by engine backfires * Heat-resistant plastic on the top and bottom, with special sealing beads that provide a protective seal against automotive operating environments * A radial seal for easy installation on late model vehicles
( 127 )
$14.99
—
$16.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
