Availability
Continental molded bypass hoses feature a Versigard rubber tube and cover to resist heat, oil, and weather. Their Tylanar-knit reinforcement meets or exceeds SAE J20R3, D1 specifications.
( 42 )
$12.99
—
$22.99
Keep the hot coolant circulating with molded heater hoses from Dayco. These hoses are constructed from synthetic EPDM for high-strength and resistance to oil, salt, mud, debris, coolants, and environmental elements. The inner base tube of Dayco molded heater hose is reinforced with knitted rayon for maximum strength and burst-resistance. They eliminate the need for multiple connections of hoses and clamps. Dayco hoses are specifically designed for your application to ensure proper fit and function.
( 105 )
$7.99
—
$16.99
Resistant and resilient, Edelmann power steering return hoses won't fail you. These replacement hoses are impervious to oil, heat, and ozone which cause ordinary assemblies to fail prematurely. Their tube construction will withstand internal oil temperatures of up to 300 degrees F. The hoses are assembled with zinc-chromate plated couplings and fittings for protection against rust and corrosion. Restore your vehicle's power steering with fresh Edelmann return hoses—available for fitment on countless makes and models spanning more than a half-century.
( 59 )
$20.99
—
$90.99
Russell speed bleeders let you bleed the brake lines on just about any vehicle all by yourself. Just replace the old bleeder screws with speed bleeders. They have an internal check valve that will pump excess air and fluid out for you. A special coating on the speed bleeders' threads keep them from admitting air into the system, and keep expelled air and fluid out. When you're done, just tighten the screws and go on to the next brake cylinder.
( 250 )
$15.95
Continental molded radiator hoses are pre-shaped for specific applications and are constructed to original equipment manufacturers' specifications. They're molded to provide full flow-through tight bends, ease of application, and stress relief on radiator connections. Their tough Versigard rubber tube and cover resist heat, ozone, and chemical coolants—and their Tylanar-knit reinforcement provides burst limits exceeding SAE standards. These hoses meet or surpass SAE J20R4, D1 specifications. Hundreds of models are available for fitment on a wide range of vehicles. Order the length, diameter, and shape designed for your cooling system. When it's time for a replacement, make Continental your first choice for molded radiator hoses.
( 432 )
$13.99
—
$33.99
Avoid a potential mishap from a leaking or a blown heater hose--make an upgrade to Continental OE Technology Series HY-T black heater hoses. The HY-Ts are perfect for applications where excellent resistance to antifreeze coolants and extreme underhood temperatures is required. The tube and cover are manufactured from EPDM (ethylene propylene diene monomer) rubber with superior resistance to heat, ozone, and chemical coolants. Each hose is then reinforced with 2-spiral synthetic for additional strength and durability. Continental OE Technology Series HY-T black heater hoses are constructed to meet specifications similar to SAE J20R3--so they can take the heat.
( 36 )
$37.99
—
$45.99
Brake bleeding has always been an inconvenient and messy job--until now. Earl's Solo-Bleed bleeder screws will solve both problems. As direct replacements for the OEM bleeder screws, Solo-Bleeds allow you to safely bleed your brakes by yourself without the mess, and without the chance of air inclusion. They come available in many different sizes to fit virtually any vehicle.
( 22 )
$37.43
—
$46.61
Keep your ride cool and running efficiently with Dayco molded radiator hoses. These OE-style replacements feature knitted reinforcement and all-synthetic EPDM rubber construction—which provides high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 to 257 degrees F. The inner base tube of these hoses is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hoses. Dayco molded radiator hoses are available in more than a thousand configurations, with dozens of length and diameter options, to achieve fitment on most any vehicle.
( 166 )
$9.99
—
$35.99
These Dorman brake speed bleeder screws are designed to make bleeding your brakes easy. The internal check valve allows you to back the screw out, pump the brakes to bleed out old fluid or air, and then retighten them to complete the job. No air can come back into the system and, best of all, it is easy to do by yourself. You won't have to wait for someone else to help or need expensive tools any longer. Take the headache out of bleeding your next brake job with these Dorman brake speed bleeder screws.
( 40 )
$13.99
Sunsong offers power steering hose assemblies for thousands of vehicles from the 1950s and up. The OE replacement hoses are available in a variety of materials and configurations, both in high-pressure and low-pressure options. If you've notice squealing or poor performance when you turn the wheel, you may have a worn hose leaking fluid. Maintain your system with the hose assembly recommended for your application.
( 55 )
$6.99
—
$84.99
Hose assemblies play an important role in A/C system performance by carrying refrigerant and lubrication from one component to another. Poor manufacturing can lead to restricted refrigerant and oil flow to the compressor, resulting in catastrophic system failure. Four Seasons air conditioning discharge hoses are designed to minimize refrigerant loss. Their fittings are permanent beadlock types with lightweight, rust-free aluminum construction. These hoses are made to OEM specifications for a correct fit and each one is 100 percent inspected to ensure bend pipe consistency is maintained through a highly precise CNC-bending machine. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Four Seasons. Features include: * Contains gaskets, O-rings, seals, and charge port fittings to properly replace the hose * Constructed with double-wall barrier hose compatible with R134A or R12 * Hose wall thickness and burst pressure exceeds OE requirements * Application specific design * Tubing meets OE wall thickness and fitting specs * Pad block fittings match OE * Orifice tube meets OE in fit, form, design, and function * Welds and connections are the same as OE with no refrigerant flow restrictions • Ferrule crimp exceeds OE tensile test requirements * All fixed brackets are included on hose assembly
( 51 )
$99.99
Bleeding your brakes is critical in keeping your ride in top performance. Dorman brake bleeder screw assortments allow you to do just that. They are made of high-quality materials and are a sure way to make bleeding your brakes a breeze. Screw assortments contain two of each of the following sizes: * 1/4-28 in. x 15/16 in. * 5/16-24 in. x 1 in. * 3/8-24 in. x 1 1/4 in. * M10-1.0 x 35mm * M10-1.5 x 30mm
( 4 )
$9.99
Dorman pipe plugs include a huge assortment of styles, sizes, and materials to fit most any project. They offer many different pipe plugs that match the original equipment plug for diameter, thread pitch, and head type to ensure a reliable repair. Dorman also offers engine oil drain plugs and cylinder head plugs designed to match the fit and function of the original part on specified vehicles. All plugs are engineered for reliable performance and a long service life.
( 15 )
$5.99
—
$7.99
Edelmann power steering pressure hoses are constructed to last. The covers are highly resistant to oil, heat, and ozone, that can cause ordinary assemblies to fail prematurely. The inside tube can withstand internal oil temperatures of up to 300 degrees F. Plus, high-tensile strength braided fabric helps these hoses withstand pulsation pressures of up to 1,500 psi and bursting pressures that exceed 6,000 psi. Tubing is coated with a zinc-aluminum alloy with an aluminum-rich epoxy topcoat, and the couplings and fittings are zinc plated for rust and corrosion protection.
( 117 )
$51.99
—
$207.99
Universal Air Conditioner is a leading supplier of top-quality air conditioning system replacement components for automotive, truck and off-road heavy duty applications. All UAC products are made of high-quality materials to ensure reliable performance and long service life. From compressors to evaporators, thermostatic switches to hose, valve caps, and more, whatever your air conditioning parts and component needs, UAC has got you covered.
( 2 )
$5.99
—
$6.99
Continental OE technology series flexible radiator hoses can be shaped for specific applications and are constructed to original equipment manufacturers' specifications. Their tough EPDM rubber tube and cover resist heat, ozone, and chemical coolants, and their Tylanar-knit reinforcement provides burst limits exceeding SAE standards. These hoses meet or exceed SAE J20R4, D1 specifications. Continental OE technology series flexible radiator hoses are available for all your custom needs.
( 52 )
$17.99
Bleed your brake system with these Dorman brake bleeder screws. They're designed to mount into your OEM caliper and will clear all stock components. Available for passenger cars, trucks, and SUVs, the Dorman brake bleeder screws allow for the fast, easy bleeding of your brake system.
( 12 )
$7.99
Continental heater hoses are original equipment molded heater hoses for popular applications. The tube in Continental's universal or pre-curved molded heater hoses is made with Versigard rubber--a compound that's highly resistant to heat, oil, and weather. The patented knit reinforcement is made with Tylanar fabric--a material that meets or exceeds the requirements of SAE J20R3, D1. Additional features include: * Designed for those vehicles requiring multiple or severe bends * Original configurations to ensure a perfect fit * Fits popular applications * Rugged construction
( 26 )
$12.99
—
$14.99
ACDelco Gold brake hydraulic hoses are quality reinforced hoses that carry fluid to transmit force within the hydraulic brake system. Each hose contains double crimped fittings to provide longer service life and durability. These Gold brake hydraulic hoses are high-quality replacement components for your vehicle's braking system. Order the model recommended for your application.
( 26 )
$8.99
—
$23.99
When, it's time to move brake maintenance to the "do" list, Centric brake hoses will help keep you riding safely. The very last thing you want in your "wait till it breaks" project list is your brake lines. If your brakes are feeling even the slightest bit spongy or it's just time to replace them, find your make and model match with Centric brake hoses.
( 45 )
$9.99
—
$21.99
Beck/Arnley hydraulic clutch lines are premium OE-fit assemblies for your vehicle. Available for many applications, their quality replacements provide reliability and durability with the peace of mind that the job will last. When you need hydraulic clutch hoses, choose those that meet or exceed OE specifications from Beck/Arnley.
Not Yet Reviewed
$9.99
ACDelco offers heater hoses for virtually any vehicle from the 1940s and up. These replacements are available in a wide array of sizes and configurations—for hundreds of hose connection positions. They're designed to original factory specs to ensure fit and performance. Order the hoses recommended for your applications.
( 32 )
$9.99
—
$53.99
Continental heater hoses are designed for vehicles that need custom-routed heater hoses. They meet or exceed SAE J20R3, D1 specifications, so they'll stand up to the heat. Continental heater hoses use rugged construction; most are manufactured from Versigard rubber—a compound highly resistant to heat, oil, and weather. Their patented knit reinforcement is typically made with Tylanar fabric, a material that also meets the safety requirements. Some models incorporate other high-grade materials, as well. Continental heater hoses are available in a variety of diameters and lengths compatible with numerous of makes/models.
( 8 )
$8.99
—
$36.99
Sunsong offers replacement clutch hoses for countless vehicles from the 1960s and up. The hydraulic lines are crafted from top-quality materials to ensure longevity and performance. If your original hoses are worn or leaky, it can definitely affect your transmission shifting ability. These assembled hoses are available in nearly a hundred lengths. Order the model recommended for your vehicle and engine application.
( 2 )
$15.99
—
$16.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
