Availability
Showing In Stock Items. Show All 27 Items.
Ajusa offers hydraulic lifters for a wide range of applications—including vehicles from Volkswagen, Audi, Dodge, Eagle, Citroen, Peugeot, Dacia, Lada, Nissan, Toyota, Land Rover, MG, Rover, Triumph, Acura©, Ford, Honda©, Hyundai, Isuzu, Kia, Mazda, Mercury, Subaru, Alfa Romeo, Audi, BMW, Chevy, Chrysler, Freightliner, Jaguar, Jeep, Mercedes-Benz, Ram, Mitsubishi, Plymouth, and Lincoln. The lifters are available in hydraulic flat tappet, hydraulic roller, or hydraulic lash adjuster style. These replacements are made from factory materials and specifications to ensure proper fitment and long-lasting performance. Since 1972; Ajusa has been a leading international manufacturer of gaskets, head bolt sets, lifters, and turbo components. They carry the world's largest range for European and Asian apps worldwide marketplace.
Not Yet Reviewed
$40.99
Cloyes timing chain and gear sets provide the ultimate in timing reliability. They include a steel crankshaft gear and either an aluminum or ductile iron camshaft gear, along with a chain. Cloyes timing chain and gear sets have been precision-hobbed and crown-shaved to provide an accurate gear-to-gear mesh with no wear and tear on the gears.
( 6 )
$275.99
Melling timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. The crank gears are machined from stress-proof steel. Most Melling timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set the cam timing at 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. The chains are available in several styles, such as single or double roller, single non-roller, and link belt. Melling timing chain sets are not for use above 6,500 rpm. Order the model designed for your vehicle application.
( 133 )
$127.99
—
$246.99
Melling replacement timing chains are available in several styles—single or double roller, link belt, or non-roller—for fitment on countless year/make/model vehicles. A key link in your engine, timing chains synchronize and transfer energy from the crankshaft to the camshaft, controlling when the intake and exhaust valves open. These solid-bushing chains offer a true bearing surface that rolls with the sprockets, eliminating chain stretch. Order the replacement designed for your specific application.
( 3 )
$39.99
—
$44.99
Melling replacement hydraulic lifters are perfect for when you're ready to freshen up your engine. Melling has designed these lifters to be within factory tolerances for the perfect fit. They are affordable and available as flat or roller lifters.
( 37 )
$14.99
URO Parts variable timing solenoids are available for select European makes and models that offer a repair solution of a malfunctioning VVT solenoid. URO uses only premium materials to manufacture these quality components for long-lasting durability. Each VT solenoid is manufactured to OEM specifications for a precision fit and leak-free performance—but without the exorbitant price tag. Select the model for your application needs.
Not Yet Reviewed
$38.99
Over time, timing chains suffer from wear and tear that can result in timing chain stretch and timing fluctuations. Cloyes offers these replacement timing chain tensioners for a variety of applications. They're made of high-quality materials to increase your cam timing accuracy.
( 13 )
$44.99
URO Parts offers variable timing eccentric shaft actuators for a variety of cars and trucks, including BMW and Mini Cooper applications from 2002 and up. The eccentric shaft position sensor is used as a feedback for the Valvetronic eccentric camshaft (part of BMW's innovative throttle system). The eccentric shaft is actuated by the Valvetronic motor and in return controls variable intake valve lift. The eccentric shaft sensor is mounted to the cylinder head beneath the valve cover. Order the actuator model recommended for your vehicle.
Not Yet Reviewed
$86.99
INA rocker arms are precision-machined from high-grade steel and are available in applications to serve as quality OEM replacements. Due to the extreme stresses that this component must endure during its service life, it is completely possible for a rocker arm to fail, necessitating replacement. If not replaced, a failed rocker arm may cause misfires, rough idle, as well as a constant ticking noise from the engines valve train. INA rocker arms serve as a great replacement to ensure long-lasting durability and performance.
Not Yet Reviewed
$14.99
The variable valve timing sprocket is key to ensuring an engine's performance and clean running. Replace a worn factory VVT sprocket with this quality engineered sprocket to restore lost performance. Designed to install and perform like the original.
( 9 )
$324.99
Dorman variable valve timing solenoids will restore the fuel efficiency and normal operation of your vehicle. These direct replacement solenoids are engineered from quality materials for a proper fit and years of effective performance. They easily plug into the electrical harness and come conveniently packaged with the installation gasket (where applicable). Maintain proper oil flow and pressure with Dorman variable valve timing solenoids.
( 27 )
$68.78
Standard Motor variable valve timing eccentric shaft sensors are used as a feedback for Valvetronic eccentric camshafts. The shaft is actuated by the Valvetronic motor, helping to improve fuel economy and emissions. Improve your vehicle's performance due to a worn or faulty eccentric shaft sensor with the proper part from Standard Motor Products.
Not Yet Reviewed
$173.99
Timing chains stretch over time and become slack. Melling timing chain tensioners will retain the efficiency of your timing chain. These quality-built steel components keep your chain under the proper tension for optimum performance in your engine. So, if your old tensioner is allowing your timing chain to "slack off," replace it with a Melling!
( 3 )
$34.99
—
$52.99
Beck/Arnley variable valve timing solenoids are direct-fit OE replacements to facilitate ease of installation and factory-style performance. They're made of high-quality materials to withstand extreme conditions, and they undergo extensive testing to ensure reliability. The solenoids are available for a wide range of vehicle applications.
( 1 )
$85.99
Expected motor life has increased greatly through the years, but anything with moving parts is susceptible to wear and will eventually need rebuilt. PAC Racing 300 Series valve spring retainers are made from 4140 aerospace grade chromoly steel, making them an excellent choice for stock to slightly modified rebuilds. PAC does their own in-house manufacturing, allowing them to build strength into these units. They are heat-treated for solid wear characteristics and to raise the tensile strength, and for a rust-free finish, they apply black oxide coatings. Into every engine a little work must go; make certain you use the right parts for your stock to slightly modified build with PAC Racing 300 Series valve spring retainers.
( 8 )
$5.92
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
