MERCURY MONTEGO | Summit Racing

On Sale

Holley Sniper 2 EFI 650 HP Base Fuel Injection Systems

Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.13 out of 5 stars ( 32 )

$1,299.95

—

$1,549.95

$1,168.95

—

$1,393.95

On Sale

Holley Sniper EFI 2300 Two-Barrel Fuel Injection Systems

Introducing Holley Sniper EFI 2300 two-barrel fuel injection systems! They're perfect for any vehicle that came standard with a 2300 Holley flange, like some Fairlanes, F100s, Javelins, Mustangs, Thunderbirds, Cougars, and more. These systems are economically priced so you can have all the benefits of EFI and still have money to finish or upgrade your ride! Put an end to cold start issues, hesitations, vapor lock, and flooding. Upgrade to Sniper EFI and get the tactical accuracy of EFI today! Features/Benefits: * Bolt-on 2300 flange carburetor replacement * Throttle body mounted ECU (kits only); no extra boxes to mount * Supports up to 350 hp with two 100 lb./hr. injectors * Only 4 wiring connections required! (Battery +, Battery -, Switched Ignition, and RPM) * Internal fuel pressure regulator eliminates the hassle of plumbing an external fuel pressure regulator (preset to 58.5 psi) * Integrated ignition timing control * High-resolution full color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own); NO laptop required! * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learn * OEM-style TPS/IAC and fuel pressure regulator for years of dependable service * Included clamp-on oxygen sensor kit for 2.25 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Equipped with C4 / C6 Ford transmission kick down lever, as well as TH350, 400, and 700R4 provisions * Accepts many common 5 1/8 in. OEM or aftermarket air cleaner assemblies * Master Kit includes complete fuel system consisting of: 20 ft. of 3/8 in. vapor guard fuel hose, 12-920 fuel pump, filters, necessary hardware and bulkhead fitting to return fuel into the tank * Sniper EFI software free to download which allows for real time tuning

4.09 out of 5 stars ( 56 )

$1,229.95

—

$1,599.95

$1,105.95

—

$1,438.95

On Sale

Holley Sniper 2 EFI 650 HP Base Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.3 out of 5 stars ( 10 )

$1,399.95

—

$1,649.95

$1,258.95

—

$1,483.95

On Sale

Holley Sniper 2 EFI Fuel Injection Upgrade Kits

Want to make the switch from the original Sniper EFI to Sniper 2 and don't want to rewire your system? The new Holley Sniper 2 fuel injection upgrade kits are designed to do exactly that! Included with each Sniper 2 plug-and-play upgrade system is an adapter solution that connects your existing Sniper EFI wiring harness to a Sniper 2 throttle body in minutes. Simply remove your Sniper EFI throttle body from the intake manifold, unplug all connectors, reinstall the Sniper 2 throttle body, and plug the Sniper EFI 2 adapter harness into your existing main harness. Cycle your ignition key, run a fresh wizard on the display of your choice, and enjoy the benefits of Sniper 2 EFI. The #1 EFI conversion system just got better! Introducing Sniper 2 EFI—a self-tuning, easy-to-install, EFI conversion for common 4-barrel (4150 flange) style carburetors. Holley took everything that they learned from the original Sniper EFI system and added 14 new features that will make your EFI conversion simpler, more reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel injected vehicle, including easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine and the system will self-tune with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Four total upgrade kits are available: polished and black, with or without external fuel pressure regulator (required for Sniper 2). Upgrade kit features: * Update your Sniper EFI to the new, improved Sniper 2 in less than one hour! * Eliminates the need to rewire your existing installation; one step, plug-and-play upgrade to a Sniper 2 * Improve your ride with the Sniper 2, including wireless connectivity, smooth throttle feel, improved RF resistance, and a hidden wiring harness. * Reuses existing coolant temperature and oxygen sensors * Female -6 AN O-ring fittings for a tight seal * Overall height is only 3.280 in. to fit under most hoods * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI of regulated fuel supply * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Sniper 2 is part of the Sniper EFI complete ecosystem * Available with fuel system kits: that include an adjustable external regulator, fittings, and a 3 ft. section of fuel hose, allowing you to easily mount your regulator in the engine bay Additional NEW features: * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

3.82 out of 5 stars ( 22 )

$1,199.95

—

$1,449.95

$1,078.95

—

$1,303.95

Edelbrock E-Street Cylinder Heads

Are you looking for a set of entry-level street performance heads for your modern street rod, muscle car, or truck? Edelbrock E-Street cylinder heads are just the ticket. These heads feature A356 aluminum castings that are heat-treated to T-6 specs for superior casting strength and quality. Their modern combustion chamber design helps to improve the combustion process and their larger-than-stock intake and exhaust ports help to move more air through your engine. These features improve an engine's efficiency, resulting in more horsepower and torque and improved mileage potential. All Edelbrock E-Street cylinder heads are assembled with manganese bronze valve guides, powder metal interlocking valve seats, and stainless steel one-piece valves with hardened valve tips. Edelbrock E-Street cylinder heads are ideal for entry level street performance engines.

4.29 out of 5 stars ( 120 )

$1,332.95

—

$1,479.95

Edelbrock Performer RPM Cylinder Heads

Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.

4.2 out of 5 stars ( 173 )

$1,022.50

—

$1,441.50

On Sale

Holley Sniper EFI Stealth 4150 Fuel Injection Systems

Holley Sniper EFI Stealth 4150 fuel injection systems feature four 100 lb.-hr. fuel injectors capable of supporting up to 650 hp naturally aspirated. The Sniper Stealth 4150 ECU is capable of fuel map self-learning and ignition timing control--improving idle stability, drivability, and wide-open throttle horsepower! These systems also include transmission kickdown provisions for GM TH350/400, 200R4/700R4 and Ford C4/C6 applications. The 4150 is available individually or in a complete Master Kit (see contents listed below). ALL Sniper EFI Stealth 4150 systems feature: * Bolt-on 4150 flange carburetor replacement * Throttle body mounted ECU; no extra boxes to mount * Supports up to 650 hp with four 100 lb.-hr. injectors * All of the wiring exits below the rear fuel injector cover—for a completely stealth installation * Timed spark part for vacuum advanced distributors located under the front fuel bowl—for easy access to the distributor * Air entry is machined to fit most stock-style air cleaners with air cleaner locator provisions * Only four wiring connections required (battery +, battery -, switched ignition, and RPM) * External fuel pressure regulator required, set to a base pressure of 58.5 psi, such as 12-886 * Integrated ignition timing control * High-resolution full-color touch screen for initial setup, tuning, and gauge displays * Simple calibration wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own); NO laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learn * OEM-style TPS/IAC and fuel pressure regulator, for years of dependable service * Included clamp-on oxygen sensor kit for 2.25 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Available in three finishes: shiny, ceramic black, and classic gold MASTER KITS also include complete fuel system with an external fuel pressure regulator preset to 58.5 psi, 20 ft. of 3/8 in. Vapor Guard fuel hose, fuel pump, filters, necessary hardware, and bulkhead fitting to return fuel into the tank.

4.27 out of 5 stars ( 41 )

$1,499.95

—

$1,549.95

$1,348.95

—

$1,393.95

McLeod RXT Street Twin Clutch Kits

McLeod RXT Street Twin clutch kits are ideal for the extreme horsepower enthusiast who wants performance and economy. Capable of handling up to 1,000 hp, the RXT Street Twin clutches are for those who've kicked it up another notch—but still require streetability. The ceramic facing on the clutch discs provides slightly aggressive engagement with a soft pedal effort, making these clutches suitable for most street performance enthusiasts. Match your vehicle specs to the correct model from McLeod. Additional features include: * Alignment tool * Lighter-than-stock pedal feel * Available with dedicated flywheel or adapter ring for factory flywheel * CNC-machined and anodized flywheel adapter ring * Smooth engagement with excellent release qualities * Ceramic facings on disc increase holding power over similar organic linings * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability

4.69 out of 5 stars ( 48 )

$1,050.00

Quick Fuel Q-Series 4-Barrel Carburetors

Get big-time performance with Quick Fuel Q-Series 4-barrel carburetors with high-flow main bodies, which include either down-leg or annular boosters, screw-in idle and high-speed air bleeds, accelerator pump discharge nozzles, and a blended venturi area. These carburetors have CNC-machined billet metering blocks with 4-stage emulsion to provide more precise fuel metering, improve throttle response, and give a more uniform fuel performance curve. With so many great benefits and their blend of performance and drivability, it's no wonder that these Quick Fuel Q-Series carburetors are the popular choice. So, go ahead--throttle it up with Quick Fuel!

4.72 out of 5 stars ( 47 )

$1,126.95

—

$1,499.95

Quick Fuel SS-Series Carburetors

These Quick Fuel SS-Series carburetors are designed to offer the power of a race carburetor in a streetable package that weighs 5 lbs. less than other carburetors. Manufactured completely from aluminum, they allow you to change the idle feed and offer power valve channel restrictions and idle and high-speed air bleeds for the ultimate in tunability. The solid-state, electric-choke Quick Fuel SS-Series carburetors have billet throttle bodies, billet metering blocks, 4-corner idle systems, secondary jet extensions, and notched secondary floats. The vacuum secondary carburetors feature fuel bowls with a single-sight glass window, while the mechanical secondary carburetors have dual-inlet, dual-sight glass 4500-style fuel bowls and include additional links to tune the secondary opening rate. Quick Fuel has done it--they've created all-aluminum Super Street carburetors that are perfect for your high performance street machine.

4.35 out of 5 stars ( 48 )

$1,024.95

McLeod RXT 1200 Clutch Kits

Intended for the high horsepower street/strip fan, McLeod RXT 1200 twin disc clutch kits are able to handle 1,200 crank horsepower. With a higher clamp load than standard RXT twin disc clutch kits, RXT 1200 clutch kits can handle almost any horsepower you can throw at them and still remain streetable. Ceramic-lined clutch discs provide smooth engagement with a stock-like pedal feel to make them ideal for the street performance enthusiast. A flat-style flywheel with a crank relief of 6.250 in. diameter or less is required for proper fitment.

5.0 out of 5 stars ( 12 )

$1,295.00

On Sale

Hooker Super Competition Headers

With Hooker Super Competition headers, the objective has always been to make the maximum horsepower possible and put it at the optimum point in the power curve. Hooker Super Competition headers feature tuned primary tubes to create optimum pressure between the intake and exhaust systems. Hooker Super Competition headers include premium exhaust gaskets and new mounting bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.

3.67 out of 5 stars ( 233 )

$1,177.95

—

$1,499.95

Edelbrock Performer Cylinder Heads

All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.

3.86 out of 5 stars ( 42 )

$1,087.50

Edelbrock Hydraulic Roller Lifter Kits

These precision, self-aligning hydraulic roller lifter kits from Edelbrock are the perfect match for Edelbrock hydraulic roller lifter camshafts for small and big block Chevy and small block Ford. These retrofit lifters are designed for hydraulic roller lifter cams, in non-roller engine blocks originally equipped with conventional lifters.

3.0 out of 5 stars ( 5 )

$1,007.95

LEED Brakes Front Disc Brake Conversion Kits

LEED front disc brake conversion kits add the safety, reliability, and performance of disc brakes to your vehicle. These kits are a direct bolt-on and precision-machined.

4.32 out of 5 stars ( 72 )

$1,059.99

—

$1,439.99

The Right Stuff Street Series Disc Brake Conversion Kits

The Right Stuff Street Series disc brake conversion kits feature all the quality components needed to convert your front or rear brakes to disc. Offered for both manual and power braking systems, Street Series kits are application-specific, maintain your vehicle's stock height or provide a 2 in. front drop, and are available with numerous component and finish upgrade options to make your braking system your own. So what's stopping you? Hundreds of kits are available; choose The Right Stuff Street Series conversion recommended for your vehicle.

3.48 out of 5 stars ( 23 )

$1,005.45

—

$1,448.75

LEED Brakes Rear Disc Brake Conversion Kits

LEED rear disc brake conversion kits add the safety, reliability, and performance of disc brakes to your vehicle. These kits are a direct bolt-on with no cutting, drilling, or welding required. All components are new, high-quality, and precision-machined. The heavy-duty parking brake caliper will allow you to use your stock parking brake cables to actuate the parking brake.

4.5 out of 5 stars ( 20 )

$1,000.99

—

$1,002.99

Ford Performance Parts Z2 Velocity Vane Cylinder Heads

Ford Performance Parts Z2 Velocity Vane cylinder heads improve power throughout the rpm range. Developed with advanced computer-aided engineering simulation tools, Ford Z2 aluminum heads feature their unique Velocity Vane intake port design that delivers outstanding street/strip power. These high performance cylinder heads are direct bolt-ons for Ford 289/302/351W engines, and they retain OEM exhaust, intake, and accessory mounting locations. Ford Z2 Velocity Vane cylinder head specs: * Cast from prime 356 T6 aluminum * Heads retain Ford OEM intake and exhaust port location and flange * Velocity Vane in port floor directs airflow around the valve stem, leading to more horsepower and torque throughout the full power range * 20 degree inline valve angle * Premium stainless steel valves: 2.05 in. intake, 1.60 in. exhaust valves * PAC 1219X conical-style valve springs with machined retainers and 10 degree machined valve locks--most hydraulic cams can be used with these springs * Valve spring closed pressure: 145 lbs. at 1.800 in. * Valve spring open pressure: 358 lbs. at 1.175 in. * Coil bind at 1.100 in., 0.650 in. max lift * Includes laser-cut guide plates for use with 5/16 in. pushrods and 7/16 in. rocker studs * Steel alloy intake and exhaust valve seats * Manganese-bronze valve guides * 63cc combustion chamber

5.0 out of 5 stars ( 2 )

$1,299.99

Hedman 304 Stainless Steel Headers

Hedman 304 stainless steel headers offer your exhaust system 100 percent mandrel-bent, 16-gauge tubes and hefty 3/8 in. flanges constructed from 100 percent 304 stainless steel for superior heat and fatigue resistance. They are available ceramic coated or raw. The HTC and Black Maxx ceramic-metallic coatings offer superior heat insulation and anti-corrosion properties to protect your "Hedder" investment and retain more heat inside the header tubes for increased exhaust velocity and improved scavenging. Unless otherwise noted, these 304s are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.

4.41 out of 5 stars ( 39 )

$1,002.99

—

$1,129.99

SSBC-USA Drum to Disc Brake Conversion Kits

Upgrade your braking system with SSBC-USA's drum to disc brake conversion kits. You'll enjoy the rhythm of modern stopping power afforded you with their cast iron or aluminum calipers, brake pads, rotors, and all necessary brackets, hardware, and bolts. Order the SSBC-USA drum to disc brake conversion kits designed for fitment on your vehicle—front, rear, or both.

3.03 out of 5 stars ( 33 )

$1,165.00

—

$1,489.00

RAM Concept 10.5 Dual-Disc Metallic Clutch Kits

RAM Concept 10.5 dual-disc metallic clutch kits usher in a new era of RAM clutch design. The Concept kits introduce modular dual-disc systems with effective performance improvements. Perfected design, better performance, and a competitive price ... what an idea! Designed for use on applications with horsepower rating of up to 1,050. RAM Concept 10.5 dual-disc metallic clutch kits feature: * Higher clamp load 10.5 in. pressure plate offers smooth pedal effort and more surface area to dissipate heat * Poly-coil sprung hub top disc allows for dampening on engagement to eliminate harsh starts and transmission fatigue * Billet modular stands are precision-machined to eliminate distortion and provide a stable platform to house the clutch unit

1.0 out of 5 stars ( 1 )

$1,279.00

Edelbrock E-CNC 185 Cylinder Heads

Edelbrock E-CNC 185 cylinder heads feature fully CNC-machined intake ports, combustion chambers, and exhaust ports for improved performance. Their all-new design delivers optimal airflow for maximum horsepower and torque in high performance street vehicles and small engine racing applications. The heads maintain the stock 23 degree valve angle and the intake flange is drilled to accept 1986 and earlier intake manifold designs. The CNC-machined ports give you a 64cc combustion chamber, a 185cc intake runner, and a 75cc exhaust port.

5.0 out of 5 stars ( 1 )

$1,431.50

Ford Performance Parts Z-Head Aluminum Cylinder Heads

Ford Performance Parts Z-Series aluminum cylinder heads provide increased intake and exhaust airflow and are available for Ford small block Windsor engines. They were designed using solid modeling technology from prime A356 T-6 aluminum and feature high-flow ports, steel alloy intake and exhaust valve seats, and manganese-bronze valve guides. Ford Z-Series heads accept both tapered seat and gasket-style 14mm spark plugs and are available as-cast or CNC-ported, both bare and assembled. Select heads are also offered with advanced "Velocity Vane" intake port design that delivers outstanding street/strip power. Developed with advanced computer-aided engineering simulation tools, their unique intake port design improves power throughout the rpm range. Velocity Vane cylinder heads are a direct bolt-on and retain OEM exhaust, intake, rocker arm, and accessory mounting locations. Features include (some vary depending on version): * A variety of combustion chamber volumes * Cast with high-flow ports * 20 degree inline valves * Steel alloy intake and exhaust valve seats * 7/16 in. screw-in studs (not included on bare heads) * Requires 1.5:1 ratio roller rocker arms with .150 in. offset intake pushrod cup (not included) * Assembled heads include laser-cut guide plates for 5/16 in. pushrods and 7/16 in. rocker studs * Premium stainless steel intake and exhaust valves (with assembled heads) Notes: * As-cast bare heads require competition valve job and bowl blending * Custom headers may be required for heads with raised exhaust port exits * Check intake manifold for port match; not all intakes are compatible due to the tall high-flow ports (does not fit M-9424-Z51/-Z51P) * Check piston-to-valve clearance, including radial valve clearance, before installing

5.0 out of 5 stars ( 1 )

$1,154.99

Summit Racing™ Stock Spindle Drum-to-Disc Brake Conversion Kits

Improve your classics brake system performance and reliability by swapping your drum brakes to disc. The Summit Racing™ stock spindle drum-to-disc brake conversion kits have everything you need to mount factory style 4-piston calipers to the original drum brake spindles. No need for new spindles, ball joints, or the additional labor to install. The kits are a direct bolt-on with zero fabrication, cutting, drilling or welding required. All new, high-quality, precision machined components are used to provide a perfect fit and factory appearance. Both manual or power options are available, as well as wheel-only kits with no booster or master cylinder. Summit Racing™ also offers versions that upgrade to cross-drilled and slotted rotors, plus braided hoses. Select the stock spindle drum-to-disc brake conversion kit for your application needs.

4.08 out of 5 stars ( 12 )

$1,075.97

MERCURY MONTEGO Parts and Accessories