Availability
Showing In Stock Items. Show All 19 Items.
On Sale
Maradyne Jetstreme electric fans feature a low-profile design to allow for turbo or supercharger installations. They use a sealed motor tested in accordance with DIN EN 60529 and are dust and waterproof to IP68. The fans utilize an S-blade design for quieter operation and have a rubber seal that eliminates vibration contact and increases airflow. Maradyne Jetstreme electric fans have all glass-filled nylon construction for maximum durability.
( 18 )
$218.58
—
$463.04
$196.72
—
$416.74
On Sale
Mr. Gasket high-performance thermostats are designed to resist large variations in coolant pressures that can occur at high rpms. Under these conditions, coolant temperature and pressure fight for control of the thermostat, keeping it from opening at its designed temperature. These balanced high-performance thermostats have brass-and-copper construction, and open at the right temperature regardless of engine rpm.
( 236 )
$29.11
—
$31.46
$21.83
—
$28.31
On Sale
Maradyne Mach Two series truck electric fans feature dual 225 W high performance IP68 sealed motors attached to dual 11 in. diameter 5-blade fans to put out over 2,500 cfm of airflow. They have all glass-filled nylon construction and include dual harnesses for an easier installation. The fans are available with different mounting bracket positions, so you can match up with your radiator mounting style.
( 16 )
$372.93
—
$374.36
$335.64
—
$336.92
On Sale
PRW High Performance mechanical water pumps are engineered to deliver increased water flow faster. These super velocity pumps significantly improve cooling for all street, high performance, and racing applications. The low pressure-injected, A356 aluminum alloy pump bodies are complemented by a precision, high-flow cast iron impeller design. Pressure-balanced water passages equalize flow and minimize engine hot spots at any speed. PRW High Performance mechanical water pumps are excellent alternatives for not only racers, but also trucks, towing, and motorhome applications. Order the model recommended for your specific vehicle and engine size. Features, items, and specs: * 35 gpm at 4,000 rpm with minimal cavitation and proportional increased flow rates at 5,000+ rpm * Aircraft industry tolerances * Heavy-duty 0.75 in. diameter steel shafts * Billet steel hubs and shielded-seal roller ball bearings * Back plate O-ring sealed for most applications * System Basis Chip (SBC) applications include adjustable hardware
( 31 )
$124.87
—
$267.71
$112.38
—
$240.94
On Sale
Mr. Gasket offers replacement water necks in a variety of styles, materials, finishes, sizes, and angles. Water necks help to hold the vehicle's thermostat in place as it opens and closes—to regulate the flow of coolant through your engine. The opening in the water neck created by the thermostat allows coolant to flow from the radiator back to the engine. Order the model recommended for your vehicle.
( 114 )
$34.72
—
$55.29
$22.57
—
$49.75
On Sale
Maradyne Mach One series electric fans feature a quiet, reversible 225 W motor, so they can be used as a puller or pusher, depending on your space constraints. They have a glass-filled nylon shroud and blade and are high-temperature and impact-resistant for harsh underhood temperatures and greater resistance to flying road debris.
( 1 )
$285.53
—
$370.40
$256.98
—
$333.36
On Sale
Mr. Gasket chrome plated water necks feature an O-ring style seal to prevent water leaks. Precision die-cast for a great fit, they're first polished to a high luster, then beautifully chrome plated for lasting beauty. These water necks come complete with an O-ring and mounting bolts.
( 64 )
$22.94
$20.65
On Sale
PRW high-flow billet electric water pumps deliver faster, increased flow. With smooth radii and transitions, they equalize flow into both sides of the engine for better cooling. These high-flow billet aluminum electric racing water pumps feature 100 watt motors that draw less than 9 amps on a 12 V system, and continued to flow over 50 gpm in a closed system through PRW's extensive testing. They offer a variety of of styles to match your application and each of them are supplied with gaskets, mounting hardware, and wiring connector. Cross the finish line with confidence using PRW high-flow billet electric water pumps. Additional features include: * Lightweight * Suitable for street or strip * The pump housing and elbows are CNC-machined from high-grade aluminum billets with O-ring seals at each connection * The impeller is a multi-vane, axial design that efficiently pumps the water through the engine with no cavitation * An inlet fitting is supplied with each pump and seals with an O-ring for a secure connection * 3,250 hours of life expectancy—well over 100,000 miles of reliable cooling performance * Pump will clear most timing belt drives and most blower drives * Backplate and fasteners included where applicable
( 4 )
$408.14
$367.33
On Sale
Maradyne Pacesetter medium-profile electric fans deliver economic efficiency for most any vehicle. Whether your vehicle is high performance or a daily driver, these S-blade designed fans will meet your needs. They are reversible, quiet, and feature glass-filled nylon construction with non-vented, medium-duty motors. They are available in a choice of diameters and each includes 90 degree mounting feet and a pigtail connector. Maradyne Pacesetter medium-profile electric fans offer a perfect fit for many projects and wallets.
( 2 )
$63.15
—
$90.39
$56.84
—
$81.35
On Sale
Summit Bucks
Mishimoto thermostats are effective in noticeably lowering engine coolant temperatures. These thermostats are built with high-quality wax and are shipped with new rubber gaskets (where applicable) for a good, leak-free seal. They are then digitally calibrated for precise operation. Mishimoto thermostats open up at a slightly lower temperature than OEM or standard thermostats once your engine is fully warmed up. This allows the coolant to flow through the engine sooner, thus reducing and maintaining cooler engine temperatures. Whether you have a daily driver or a modified and upgraded turbo, Mishimoto thermostats will maintain optimal temperatures to efficiently cool your application.
( 73 )
$68.95
$62.06
On Sale
Frostbite electric water pumps are a must for high performance vehicles where horsepower comes at a premium. They eliminate common issues found in traditional mechanical water pumps--parasitic horsepower loss, heavy cast housings, and impeller drag. Frostbite electric aluminum water pumps are available in black and polished finishes with offerings for popular engine platforms. When it comes to keeping your cooling system performing at peak levels, make it Frostbite! Features include: * Available with cast or billet aluminum housings * Free-up lost horsepower resulting from the use of mechanical pumps * Frostbite logo laser-etched for performance look * Ford applications available with block-off plates * Kits come complete with gaskets, wiring pigtail, and mounting hardware
( 10 )
$349.95
—
$549.95
$192.95
—
$493.95
On Sale
PRW Competition+ mechanical water pumps are engineered to deliver a volumetrically increased water flow that will significantly improve cooling system demands for street, high performance, circle track, and endurance racing applications. They are offered in several finishes, including ceramic coated to block excessive heat radiation, and provide superior corrosion resistance and rust protection. Benefits and characteristics of the PRW Competition+ water pumps: * Auxiliary outlets for custom plumbing * Aluminum alloy pump bodies * Precision cast iron impellers * Pressure-balance water passages * Designed to equalize flow and minimize engine hot spots at any speed * Steel hubs and heavy-duty, shielded sealed roller ball bearings * Thicker rear cover for circle track application
( 1 )
$129.87
—
$156.87
$116.88
—
$141.18
On Sale
Four Seasons heater cores feature heavy-duty construction for durability and quality engineering to help provide the original factory fit, form, and function. All units include OE-style hardware for installation ease and receive independent testing for proven quality and performance. Keep your older vehicle operating like new with the replacement Four Seasons heater core designed to fit your vehicle.
( 14 )
$31.99
—
$80.99
$28.79
—
$72.89
On Sale
Agility Auto Parts offers a complete line of radiators covering most North American vehicle applications. These certified automotive condenser components meet or exceed the manufacturer's specifications, making them ready to install out of the box. Engineered and manufactured under ISO TS16949 quality system guidance, every Agility Auto Parts radiator is 100 percent leak-tested for trouble-free operation and utilize a B-tube design to optimize coolant flow through the radiator, while adding structural rigidity creating a durable tube. Plastic tanks are designed and tested to 100,000 pressure cycles with no cracks, bowing, or distortion. The tanks are cast with ribbing inside or out for added strength. Order the radiator model designed to fit your application.
( 32 )
$115.99
—
$171.99
$104.39
—
$154.79
On Sale
Agility Auto Parts offers a complete line of automotive heater cores, covering 94 percent of all North American vehicle. They provide value in several ways, including increased thermal performance and resistance to corrosion. The HVAC cores use enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. These certified heaters meet or exceed OE specifications—and are "drop in fitment" checked in the actual vehicles HVAC heater module, so they're ready to be installed right out of the box. Agility Auto Parts heaters are engineered and manufactured under ISO TS16949 quality systems and are 100 percent leak-tested.
( 19 )
$40.99
—
$44.99
$36.89
—
$40.49
On Sale
Clearance
Agility Auto Parts offers a complete line of automotive condensers covering most of North American vehicle applications. These certified components meet or exceed the manufacturer's specifications, making them ready to install out of the box. Engineered and manufactured under ISO TS16949 quality system guidance, every APDI air conditioning condenser is 100 percent leak-tested for trouble-free operation!
( 8 )
$110.99
—
$164.99
$99.89
—
$148.49
On Sale
By combining a fan motor, blade, and shroud together Agility Auto Parts offers a complete line of quality automotive fan assemblies covering 96 percent of all North American vehicle applications. They are engineered and manufactured utilizing superior quality parts that meet or exceed OE specifications. Agility Auto Parts fan assemblies are drop-in replacements right out of the box with all the necessary factory connectors and mounts included for a complete replacement product. Agility Auto Parts offers single fan assemblies for engine and A/C cooling, dual radiator and condenser fan assemblies, and single fan assemblies with dual functionality.
( 4 )
$186.99
$168.29
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
