Availability
Classic Ford 302 stock drop-in long block crate engines from ATK High Performance are shipped to you fully dressed. These are basic stock engines with moderate horsepower and torque based off the 80-86 Ford 302 engine. These engines typically make about 240 horsepower on the dynamometer. Additional specs: * Block: seasoned OE roller block * Bore/Stroke: up to 4.060 x 3.000 * Displacement: 302 c.i.d. * Crankshaft: OE Ford cast late model crankshaft (50 oz. imbalance) * OE steel connecting rods 5.4 in. stock bolts * Pistons: hypereutectic * Piston rings: moly rings * Compression Ratio: 8.5:1 * Camshaft: hydraulic flat tappet * Camshaft specifications: OE stock * Camshaft bearings installed and blocked to OEM position * Cylinder heads: OE cast iron * Freeze plugs: brass installed and sealed * Rocker arms: stamped steel 1.5 ratio * Oil galley plugs: installed and sealed * Oil pan: OE 5 qt. front sump * Weight: 430 lbs. * For engine break-in please follow the ATK break-in procedure that is included with the engine.
( 30 )
$3,998.99
TCI Super StreetFighter transmissions bridge the gap between the StreetFighters and full Competition series transmissions. Like the StreetFighter units, these are equipped with 100 percent tested, manual/automatic valve bodies. That means that most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a racetrack shift that bangs through the gears and shaves time off your ETs. When you use the manual gear selection feature, the Super StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, the transmissions retain positive automatic shifts, for the ease of driving you look for in an automatic transmission.
( 54 )
$2,132.95
—
$2,169.95
The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
( 4 )
$3,870.95
Replace your old, tired mill with ATK High Performance Ford 302 300 hp Stage 2 long block crate engines to give your old ride new life. These engines are designed to be perfect replacements for your old 302, but with a bit more kick. The upgraded engines produce 300 hp and 336 ft.-lbs., while still maintaining a smooth idle and great driving manner. These mills are perfect for daily drivers or mild-mannered street rods. Ford 302 300 hp Stage 2 long block crate engines feature: * Handpicked, remanufactured blocks * OE cast iron cylinder heads * Intake manifold * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Cam lift- .498 int./.498 exh. * Cam duration @ 0.50- 219 int./219 exh. * 9.0:1 compression * Distributor * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube * Water pump * Front damper and flexplate
( 3 )
$4,210.99
The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
( 6 )
$3,734.95
Are you looking for a set of entry-level street performance heads for your modern street rod, muscle car, or truck? Edelbrock E-Street cylinder heads are just the ticket. These heads feature A356 aluminum castings that are heat-treated to T-6 specs for superior casting strength and quality. Their modern combustion chamber design helps to improve the combustion process and their larger-than-stock intake and exhaust ports help to move more air through your engine. These features improve an engine's efficiency, resulting in more horsepower and torque and improved mileage potential. All Edelbrock E-Street cylinder heads are assembled with manganese bronze valve guides, powder metal interlocking valve seats, and stainless steel one-piece valves with hardened valve tips. Edelbrock E-Street cylinder heads are ideal for entry level street performance engines.
( 118 )
$1,332.95
—
$1,479.95
Get the most from your high performance mods with these Summit Racing™ dual exhaust systems for header-equipped passenger cars. The systems feature aluminized or 409 stainless steel tubing that is mandrel-bent for high exhaust flow, increased horsepower, and reduced backpressure. These header-back exhausts are available in dozens of configurations for proper fitment on a wide range of vehicles, both manual and automatic. Your options include material, finish, exit location, and pipe diameter. Feel the power when you're equipped with a Summit Racing™ dual exhaust system!
( 628 )
$339.99
—
$595.99
On Sale
One of the most popular updates for an older vehicle is swapping out the carburetor for electronic fuel injection (EFI); but using an external pump to supply the high pressure needed for EFI can be a problem. External pumps are loud and often difficult to mount properly. Holley Sniper EFI conversion fuel tanks are the complete bolt-in solution for your EFI conversion. They're a direct-fit for a wide variety of specific applications, require no modifications, and include either a 255 lph or 400 lph submersible pump, a fuel level sender, and internal baffles. For the fuel you need with in-tank quietness, order a Holley Sniper EFI conversion fuel tank. Features include: * 255 lph model supports up to 550 hp * 400 lph model supports up to 750 hp * 60 psi at 13.5 V with a 10.4 amp draw * Made of coated, galvanized steel that is also silver powdercoated for corrosion protection * Fuel pump hanger assembly included * Sender has 1/4 in. NPT supply and return line ports for easy fuel line connection * Barbed vent fitting * Sending units have the correct ohm range for factory gauges * Fuel pump and sender are recessed into the tank * EFI-style tank baffling includes a 4.3L internal fuel tray to prevent starvation * Fits and looks like an OE tank when installed * Include new tank straps, where applicable
( 108 )
$799.95
LEED front disc brake conversion kits add the safety, reliability, and performance of disc brakes to your vehicle. These kits are a direct bolt-on and precision-machined.
( 65 )
$739.99
—
$1,924.99
XS Power AGM batteries are some of the lightest racing batteries on the market. Independent test results have proven that they outperform other battery models that outweigh these power providers by up to 20 lbs. Cutting-edge lead acid battery technology produces more energy in a smaller space because each cell is compressed before case insertion, resulting in efficient power-producing packages that are completely sealed with no need to ever add water. This design is ideal for the abuse of racing, making these the batteries of choice for demanding racers and Monster Truck drivers who need top performance and reliability. When you are pushing to power the impossible, you need the non-stop capabilities of the XS Power AGM batteries best suited for your application. Product features include: * Designed to be an inch shorter than what the competition offers for fitting in places where space is at a premium * Deep-cycling ability and ultra-low internal resistance results in high cranking amps and excellent vibration resistance * Variable position mounting (except upside-down) thanks to the no-spill design * Offered in 6 V, 12 V, 14 V, and 16 V models
( 265 )
$393.68
—
$439.99
TCI StreetFighter transmissions are durable enough to withstand the rigors of even the toughest street machines. Equipped with a manual/automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a race track shift that bangs through the gears and shaves time off of your ETs. When you use the manual gear selection feature, the StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, they retain positive automatic shifts for the ease of driving you look for in an automatic transmission.
( 149 )
$3,350.95
—
$3,375.95
Cool just got better! Cold-Case performance aluminum radiator modules bundle performance components for the most efficient cooling available. They've packaged their high-quality radiators with their exact fit shrouds and electric fans to deliver the best fit with an original look, an easy install, and effective cooling at an affordable price. Order the universal or application-specific model best suited for fitment in your engine bay. All Cold-Case radiator modules feature: * OEM-stamped, fully polished tanks * Aluminum shroud * Electric fan(s) * Correct OEM fitment * Lightweight, efficient aluminum construction * 100 percent TIG-welded * Internally welded filler necks offer a clean, factory look * Two oversized cooling rows for increased capacity * 1 in. to 1 1/4 in. tubes for higher volume * Works with factory filler cap * Includes OEM-style petcock * 42.7 percent lighter than comparable copper radiators * 30 percent thicker materials than no-name aluminum radiators * 60-day COOL guarantee
( 183 )
$588.54
—
$654.54
Odyssey sealed rechargeable drycell batteries provide high engine-cranking pulses and are capable of 400 deep cycles. They can be installed on their sides or at any angle and have a 2-year storage life at 25 degrees C.
( 221 )
$436.99
Get cool with Vintage Air! Their Gen 5 SureFit evaporator kits assist with providing powerful and intelligent climate control for your vehicle. These kits utilize an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments. Additionally, they include variable blower speed and dash/floor/defrost blend. Vintage Air Gen-V SureFit evaporator kits include the evaporator unit and mounting brackets, louvers (where required), duct hose wiring harness, hardware, and installation instructions, along with either a bolt-in replacement control panel or Vintage Air's patented electronic cable converters to use with your factory system controls. Choose the kit designed for your vehicle. Features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high-performance blower
( 9 )
$1,417.99
You're taking a step up in performance with Edelbrock E-205 small block Ford cylinder heads. Featuring larger runners for increased airflow, revised exhaust ports, and larger diameter springs for higher lift camshafts, Edelbrock E-205 cylinder heads are ideal for spec series racers and larger displacement engines. They are able to support the power that you need to compete--more than 500 naturally aspirated horsepower and even more in forced induction applications! Get race-level performance with OEM compatibility when you bolt on a pair of Edelbrock E-205 cylinder heads.
( 2 )
$1,687.95
—
$1,838.95
Put some extra beef in your muscle car with Tin Man Fabrication subframe connectors. Their precision-built steel subframe connectors are strong, easy to install, and require no cutting into your floor pans, making them perfect for your finished car! These robust subframe connectors are fabricated from 2 in. 11-gauge square tubing with 11-gauge plates. They provide a unique fit, slipping inside of your front subframe, closely following the floorboard contours front to back, and linking to the underneath and side of your rear subframe to securely weld in place. Complementing their driveshaft loops, Tin Man Fabrication subframe connectors offer solid, quality American craftsmanship priced competitively for you, the average or avid car guy.
( 35 )
$194.99
Are you tired of having brake fade or not enough stopping power? The Right Stuff designed rear disc brake conversion kits give you a complete brake kit without breaking the bank. They manufacture these kits from quality materials to ensure performance and dependability.
( 365 )
$481.80
—
$1,155.75
Need a fuel tank? There's only one place to get exactly what you need: Tanks Inc.! They offer a large variety of polyethylene, stainless steel, mild steel, and alloy coated steel reproduction gas tanks and fuel injection-ready tanks. EFI-Ready fuel tank applications are ready to fuel many popular vehicles and even a few that are not-so-popular. So, whatever you desire to fit a tank to—be it a street rod, muscle car, classic truck, or that special ride—Tanks Inc. fuel tanks deliver the best quality and fit, blended with their knowledge and expertise, to power your project successfully. NOTE: These EFI-Ready Fuel Tanks are designed for vehicles with engines retrofitted for electronic fuel injection. They have holes pre-drilled for the pump—and the baffling in the tank is suited for electric fuel pumps.
( 73 )
$288.99
Edelbrock Pro-Flo 4 EFI systems provide you with a high performance traditional-style intake and 4150-style throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor (not included with LS kits) * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2-bar MAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.
( 121 )
$2,914.95
Bring your ride to life with ATK High Performance Ford 302 350 hp Stage 1 long block crate engines. These engines are based on the tried and true Ford 302 and are built to perform. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, tired engine or just looking for a little more performance, ATK has you covered. Ford 302 350 hp Stage 1 long block crate engines feature: * Handpicked, remanufactured blocks * Performance aluminum cylinder heads * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Cam lift- .512 int./.512 exh. * Cam duration @ 0.50- 220 int./224 exh. * 9.5:1 compression * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube
Not Yet Reviewed
$4,765.99
Flowmaster tailpipe kits finish off your exhaust with high-quality mandrel pre-bent pipes. Available in 16-gauge aluminized steel tubing or 16-gauge 409 stainless tubing, Flowmaster tailpipe kits are designed to fit perfectly onto your vehicle with all the quality and performance you expect. These mandrel-bent tubes eliminate kinks in the bend area for improved exhaust flow plus it allows you to route hot exhaust out from under your vehicle, keeping it cleaner and safer without a loss in performance. Add Flowmaster tailpipe exhaust technology to your ride.
( 319 )
$215.95
Tanks Inc. manufactures EFI-Ready fuel tank kits that look like an OE tank when installed. The fuel pump and sending unit are recessed in the tank for easy installation, with no modification needed to your car. In most applications, these tanks are fuel injection ready. They are all manufactured from galvanized steel with a silver powdercoat finish. Tanks Inc. fuel tanks are perfect for your pro-touring, autocross, or road racing ride. NOTE: These EFI-Ready Fuel Tank Kits are designed for vehicles with engines retrofitted for electronic fuel injection. The tanks have holes pre-drilled for the pump—and the baffling in the tank is suited for electric fuel pumps. They include the sending unit and pump in the tank, ready-to-go for installation.
( 49 )
$620.99
Manufacturer Rebate
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 692 )
$974.50
—
$1,706.60
You have asked, and Baer has answered! Baer is bringing back the original Baer Claw brake system that started it all, with the introduction of their Classic Series disc brake kits. They are direct bolt-ons for early GM, Ford, and Mopar applications. Front kits feature aluminum 2-piston, pad-guided calipers and vented 11 in. rotors, while the rear kits feature cast iron single-piston calipers and solid 10.5 in. rotors for maximum clearance on small wheel applications. You want to modernize your early muscle car, fit stock wheels, have easy access to replacement parts, and not break the bank. Baer Classic Series brake kits are your answer! Features include: * Red powdercoated calipers * Braided brake hoses * Slotted and drilled rotors
( 33 )
$869.95
—
$1,049.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
