Availability
On Sale
Holley retrofit engine oil pans for GM LS engines are designed to install an LS engine in a variety of GM muscle car and truck chassis. They provide OEM fitment, OEM oil filter mounting, OEM oil cooler port provision, OEM engine NVH suppression, OEM flange gasket and sealing, proper structural rigidity, and OEM bellhousing attachments. The oil pans are manufactured from traditional high-quality cast aluminum and include a sump baffle, oil pump pickup tube, sump plug, oil filter stud, and oil passage cover.
( 245 )
$435.95
—
$514.95
$391.95
—
$462.95
On Sale
Scott Drake FE oil filter adapter is an exact reproduction of the updated version Ford switched to in 1968 which provides increased oil flow compared to earlier versions. It is an excellent upgrade for any pre-1968 high performance engine where oil flow is critical.
( 15 )
$76.15
$68.54
On Sale
Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications. pMaxKote provides: * Superior seizure resistance * Superior cavitation resistance * Superior wear resistance * Superior protection against oil starvation
( 10 )
$143.99
—
$201.99
$129.59
—
$181.79
On Sale
Scott Drake engine pulley sets are available with single, double, and triple groove crankshaft pulleys. Their offerings fit late Ford engines (1965-70) with or without power steering and/or air conditioning. Scott Drake aluminum pulley sets contain a crankshaft, water pump, and alternator pulley, along with high-quality installation hardware.
( 3 )
$222.95
$200.65
On Sale
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 66 )
$39.99
—
$164.99
$35.99
—
$148.49
On Sale
Mr. Gasket cast aluminum covers are constructed of high quality die-cast aluminum for an excellent fit. They are available in polished, finned, and ball-milled versions to fit a variety of engines. Features: * Top quality cast aluminum construction * Choice of smooth top polished, finned, or ball-milled designs * Some available in tall versions for additional rocker arm clearance * Thick gasket rail area for excellent sealing * Pre-punched breather openings with baffles * Includes mounting hardware
( 84 )
$99.95
—
$110.95
$89.96
—
$99.85
On Sale
Mr. Gasket aluminum valve covers are fabricated from 100 percent TIG-welded 6061 T-5 aluminum sheeting for a perfect lightweight fit. Available in natural, polished, powdercoat, or anodized finishes, they'll enhance the appearance of any engine compartment. The covers feature an extended sealing lip to positively locate and secure the gasket from moving, eliminating oil leaks. These valve covers can be ordered with plain or finned tops, and each piece includes a 1 1/4 in. diameter breather hole (except where noted). Order the model designed for fitment on your make/model and engine type.
( 78 )
$215.95
—
$238.95
$194.35
—
$215.05
On Sale
Brighten and freshen up your engine compartment with a Scott Drake oil cap. These Scott Drake oil caps not only look sharp, but they will also keep oil in its place.
( 97 )
$42.79
—
$57.09
$38.51
—
$51.38
On Sale
King HP-Series rod bearings were developed mainly for drag race applications needing a material harder than the Babbitt top layer. These applications demanded a structure that could withstand high loads for short durations and still offer higher embeddability and compatibility. In response, King developed the HP-Series, featuring the Alecular metal structure. The HP-Series is also suited for many performance applications with nodular cast iron crankshafts, such as street, strip, and some levels of Circle Track racing. Order the set recommended for your vehicle. HP-Series bearings are particularly suitable for the following cases: * When a tri-metal bearing's Babbitt overlay extrudes over the sides, migrates to one end, or is physically removed by the crankshaft * When the intermediate layer of a tri-metal bearing is exposed, damaging the crank journal and requiring expensive grinding or replacement * When contaminants enter the oil stream, scratching and damaging the crankshaft journals
( 35 )
$82.99
—
$111.99
$74.69
—
$100.79
On Sale
MSD timing pointers are CNC-machined from 6061-T6 billet aluminum. These adjustable pointers are fully machine lightened; and each of the main bodies—as well as adjustment assemblies—are black anodized for long-lasting corrosion protection. They are built as direct-fit components, and various part numbers are available to fit multiple-size balancers. MSD timing pointers are designed to work on small block Chevy, big block Chevy, and small block Ford engines. They have a 4-degree range of movement for you to find the precise timing location. Stainless steel hardware is also included.
( 42 )
$109.95
—
$110.95
$98.95
—
$99.85
On Sale
King HP-Series main bearings are recommended for street and strip performance applications. They're designed for blown, turbocharged, NOS, and alcohol-fueled engines using aftermarket crankshafts. These main bearings have greater eccentricity for superior oiling at high rpm, and a chamfered surface for large radii crankshafts. HP-Series bearings also feature large, chamfered oil holes—and are available in 1/2 grooving for improved oiling to withstand high-rpm applications. Order the bearings designed for fitment with your specific engine.
( 47 )
$72.99
—
$124.99
$65.69
—
$112.49
On Sale
Finish your engine project with Scott Drake valve cover bolts. They are made from high-quality steel and are also available in stainless steel. You can never go wrong with Scott Drake reproduction hardware.
( 9 )
$26.14
$23.53
On Sale
King SI-Series main bearings are recommended for OE applications. These replacement bearings are designed for aftermarket gasoline or diesel engine rebuilding—and performance engines with factory crankshafts. The bearings have an improved crankshaft finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series main bearings feature improved oil clearance to reduce wear and increase engine life, which in turn reduces operating noise, vibration, and excess oil flow. Order the bearing set designed for fitment on your make and model.
( 78 )
$14.99
—
$41.99
$13.49
—
$37.79
On Sale
King SI-Series rod bearings are recommended for OE applications. They're designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE crankshafts. These direct replacements have an improved finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series rod bearings also feature improved oil clearance to reduce wear and increase engine life—which, in turn, lessens operating noise, vibration, and excess oil flow. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 88 )
$10.99
—
$44.99
$9.89
—
$40.49
On Sale
Give your engine the winning edge with King XP-Series coated main bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote™ nano-composite coating takes protection to the next level without adding any additional thickness! Order the replacement main bearings designed for fitment with your engine. pMaxKote™ provides: * Superior seizure resistance * Superior cavitation resistance * Superior wear resistance * Superior protection against oil starvation
( 7 )
$121.99
—
$193.99
$109.79
—
$174.59
On Sale
Dial-in your bellhousing alignment to the engine block with Lakewood offset dowel pins. These adjustable pins can correct improper alignment. They're offered in a variety of offsets, lengths, and diameters for nearly a dozen makes, including Chevy, Oldsmobile, Pontiac, Buick, Ford, Lincoln, Mercury, and Mopar models. Stock pins for Ford and GM applications are also available. Lakewood bellhousing dowel pins are simple, affordable keys to aligning the transmission housing with your engine.
( 25 )
$69.45
$62.51
On Sale
King AM-Series main bearings are recommended for street or marine applications. These crankshaft bearings have superior embeddability, which provides greater macro-particle to reduce scratching of the crank journals and tearing or weakening of the Babbitt overlays. King AM-Series main bearings feature tolerance control to within plus or minus .0001—and they're lead-free, making them environmentally-friendly and user-safe. Hundreds of performance sets are available; order the replacement bearings designed to fit your vehicle.
( 34 )
$18.99
—
$102.99
$17.09
—
$92.69
On Sale
These chrome valve covers from Mr. Gasket are the perfect addition to your engine. They have Mr. Gasket quality and a great price. The covers have a thick-gauge steel with a durable chrome finish, and most are available in short or tall versions.
( 22 )
$83.19
—
$99.95
$74.87
—
$89.96
On Sale
VEGE Remanufactured cylinder heads are a popular choice for performance and value. With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured cylinder heads with a level of quality that equals that of new OEM products—at extremely competitive prices. The rebuilt cylinder heads are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Unless otherwise noted, the assemblies include a cast iron or aluminum cylinder head, intake and exhaust valves, valve springs, retainers, locks, stem seals, rocker arm studs, and more. Many heads include rocker arms. Nearly a thousand models are available, for fitment on countless applications.
( 39 )
$278.99
—
$472.99
$228.99
—
$422.99
On Sale
Weiand oil pan packages were clearly visible on those old gassers, getting them down the track with speed and consistency. The oil pan features trap door baffles to help keep oil under control during hard acceleration, as well as increased oil capacity to keep high performance engine oil systems fed properly. Choose from among dozens of Weiand oil pan packages—a great option for drag race, road race, and circle track applications.
( 104 )
$318.95
$287.05
On Sale
The lifeblood of your vehicle is lubricant—which is why Mr. Gasket engine oil dipsticks and tubes are so important. They're small, inexpensive parts that tell you if your oil supply is dangerously low. And besides the function they fulfill, these accessories look great under the hood. Made from steel or billet aluminum, the dipsticks are available in a black, polished, or chrome plated finish. Find the OE-style kit that's built to fit your specific engine application.
( 84 )
$31.48
$20.46
On Sale
Patriot power steering brackets are made from quality steel with a zinc plated finish for lasting durability and are designed for use in the relocation of an external slave cylinder. These power steering brackets are sure to do the trick if you need to install headers and don't have anywhere to mount your add-ons.
( 4 )
$60.75
$54.68
On Sale
King AM-Series rod bearings are recommended for street or marine applications. They have superior embeddability, which provides greater macro-particle and reduces scratching of the crank journals and tearing or weakening of the Babbitt overlays. The direct replacements feature tolerance control up to +/- .0001—and they're lead-free, making them environmentally friendly and user-safe. Order the King AM-Series rod bearings in the application designed for proper fitment with your vehicle.
( 27 )
$13.99
—
$144.99
$12.59
—
$130.49
On Sale
Flowtech power steering brackets are manufactured from quality steel and feature a painted black finish. These brackets are required for installing any Flowtech headers where you want them.
( 3 )
$42.16
$37.94
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
