Availability
On Sale
Quick Fuel Slayer Series carburetors offer affordability, great looks, and impressive adjustability. Economical horsepower performance is not a dream! Quick Fuel Technology has engineered their Slayer Series of 600 cfm and 750 cfm street carburetors with everything you want at a price you need to fit your budget. Their hand-built quality and all-aluminum construction are outstanding—but consider these additional features: changeable idle air and high-speed air bleeds, 3-stage emulsion circuits, changeable primary idle feed and power valve restrictions, vacuum secondary adjustment screw, and unique secondary metering plate with changeable jets. Pursue horsepower and get more dollar power with the carburetors that let you tune "your way" and offer show-quality appeal—Quick Fuel Slayer Series carburetors.
( 223 )
$499.95
—
$549.95
$448.95
—
$493.95
On Sale
Street Demon carburetors redefine street carburetors with clean looks and ease of use. They offer enthusiasts a straightforward design to deliver stable idle, amazingly crisp throttle response, and smooth performance. With optimized calibration and a dual mounting pattern, they are ready to run right out of the box. The carburetors feature an integrated fuel bowl/main body design with the gasket above fuel level and have no plugged passages, eliminating all potential leak paths. Additional features include: * Available with either a ball burnished aluminum, polished aluminum, or black aerospace composite fuel bowl * One-piece air horn assembly with a single fuel inlet * Torsion spring valve control/adjustment permits seamless primary to secondary throttle response, regardless of the throttle opening rate * Dual mounting bolt pattern (square bore or spread bore) fits any street 4-barrel intake manifold. Adapter may be required. * Integrated 700R4/200R4 transmission kickdown cable mounting location * Ford automatic transmission kickdown * Inverted flare and 3/8 in. barb fuel inlet fittings
( 388 )
$549.95
$448.95
—
$499.95
On Sale
Holley Sniper offers OE-style 255 lph EFI fuel pump modules for a wide range of vehicles, including many Chevy, Pontiac, Buick, Oldsmobile, GMC, Ford, Mercury, Jeep, Dodge and Plymouth cars and trucks from the 1950s, '60s, '70s, and '80s. These in-tank modules are high-pressure units that flow 255 liters per hour (LPH) and are capable of supporting electronic fuel injection (EFI) engines producing up to 550 hp. A pre-calibrated fuel level sending unit designed to work with the factory fuel gauge for this application is included. Each module also features a HydraMat filter which has a unique internal reservoir that keeps fuel available at the pick-up and also provides protection from contaminates. Fuel pressure is internally regulated to 58 psi, eliminating the added expense and effort of purchasing and installing an external fuel pressure regulator; no separate return line is required because these modules return excess fuel right inside the tank! The Holley Sniper EFI fuel pump module was designed as a direct replacement for your factory pick-up and sending unit. There's no need to purchase a custom EFI fuel tank. You can even retain the factory fuel hard line—just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earls Vapor Guard line.
( 10 )
$499.95
$448.95
On Sale
ACCEL Performance fuel injectors provide precise control of fuel delivery and atomization for increased power, improved throttle response, and better fuel economy. They feature either a high or low-impedance design to function accurately with your vehicle's ECU. ACCEL fuel injectors come complete and ready for installation with precision-molded O-rings and fine-mesh fuel strainers. More product features and notes: * Utilize a new low-mass disc design that ensures a spray pattern for ultra-fine atomization and improved burn efficiency * Higher than stock flow rates may require reprogramming
( 220 )
$549.95
$403.95
—
$499.95
On Sale
Weiand dual plane Stealth intake manifolds feature long, separated runners for bottom-end and mid-range power, plus a special runner design and larger plenum to flow the air needed for high-rpm horsepower. They mount single, square-mount 4-barrels and make power from idle all the way to 6,000 rpm. That makes Stealth manifolds the perfect choice for your street/strip vehicle. Order the size and style needed for your cylinder head application.
( 154 )
$387.95
—
$449.95
$349.15
—
$403.95
Trick Flow® TFX™ fuel injectors have so many features, it's no wonder that they are considered one of the best aftermarket injectors available! They atomize fuel better, resist clogging, are quieter, and require less energy to operate than other injectors. Low magnetic stainless steel bodies help prevent moisture contamination, and OEM-style clip grooves eliminate possible fuel leaks. Other features include electronically drilled and machined disc-type fuel control valves, improved nozzles and coil windings, and Viton® O-ring seals to prevent air leaks under extreme operating conditions. High-quality, 1/2 micron filter screens keep foreign debris and contaminants from entering the injectors to ensure proper performance and a long life cycle. TFX™ fuel injectors are 100 percent duty cycle tested to ensure reliability and performance. All flow values are at 3 bar (43.5 psi).
( 36 )
$549.99
Need a fuel tank? There's only one place to get exactly what you need: Tanks Inc.! They offer a large variety of polyethylene, stainless steel, mild steel, and alloy coated steel reproduction gas tanks and fuel injection-ready tanks. EFI-Ready fuel tank applications are ready to fuel many popular vehicles and even a few that are not-so-popular. So, whatever you desire to fit a tank to—be it a street rod, muscle car, classic truck, or that special ride—Tanks Inc. fuel tanks deliver the best quality and fit, blended with their knowledge and expertise, to power your project successfully. NOTE: These EFI-Ready Fuel Tanks are designed for vehicles with engines retrofitted for electronic fuel injection. They have holes pre-drilled for the pump—and the baffling in the tank is suited for electric fuel pumps.
( 74 )
$288.99
—
$314.99
UREMCO remanufactured carburetors are expertly built from core to finished product. Purchasing a reman carb can sometimes be iffy ... unless you choose wisely. United Remanufacturing Co. has over 60 years of experience in carburetor rebuilding. As fuel system rebuilders with expertise and stringent standards, they ensure you the best quality at the best price. They rebuild carburetors from most all automobile and truck manufacturers, and each one is individually inspected and rigorously tested on flow-bench engine simulators by seasoned and knowledgeable employees. All UREMCO carburetors come equipped with new needle and seats, base gaskets, gas filters, and accelerator pumps. The extensive process from disassembly, cleaning, and testing to final assembly restores these carburetors back to their original form, fit, and function. When you purchase a UREMCO remanufactured carburetor, you're buying quality, value, and, most importantly, peace of mind. Order the replacement model designed for your vehicle and engine application.
( 812 )
$254.99
—
$475.99
Trick Flow® R-Series intake manifolds for small block fords are designed for maximum power delivery on heavily modified street/strip and race engines that operate in the 3,500-7,500+ rpm range--right where it's needed the most. Vital features include A319 aluminum construction, integral bosses for nitrous or fuel injection nozzles, and extra material for custom port work. These carb-style EFI manifolds accept standard Bosch or Siemens-type fuel injectors. Overall height to the mounting pad is 6.300 in. (5.0L/302) or 6.450 in. (351 Windsor).
( 4 )
$468.99
On Sale
You will not find an easier way to upgrade your fuel system than the Holley Sniper OE Style 350 LPH EFI Fuel Pump Modules. They are a direct replacement that fits your factory fuel tank, so you don't have to guess when it comes to something as important to your project as the fuel system. Because it was designed as a direct replacement for your factory pick-up and sending unit, there is no need to purchase a custom EFI fuel tank. You can even retain your factory fuel line. Simply connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earl's Vapor Guard Line. Features: * The in-tank fuel pump module is a high-pressure unit that flows 350 liters per hour (LPH) and is capable of supporting EFI (electronic fuel injection) engines producing up to 750 horsepower * Includes a pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for your application * Solves all the usual issues of converting from carburetor to EFI
( 28 )
$549.95
$493.95
Top Street Performance High Performance intake manifolds are dual-plane models ideal for street performance applications. With upgrades throughout, they are designed to improve throttle response, increase your horsepower, and give you more options on the top-end. They are cast from lightweight aluminum with lower profiles and come in multiple finishes for several applications. TSP's dual-plane intake manifold are great additions to any performance engine. Additional provisions: * Ford models have nitrous bosses, a rear water crossover with additional ports, and a square bore carburetor flange * Chevy models have dual distributor hold-downs, 4-corner water ports, and a choke block-off kit
( 2 )
$293.34
On Sale
Holley 525 LPH fuel pump modules are designed and engineered to meet the demands of today's high-pressure and high-flow engines with efficiency, reliability, and decades of engineering expertise. These high performance components with OE-quality and fitment in mind will deliver maximum fuel flow throughout a wide pressure range to support major horsepower. Kit includes assembled module, a new filter sock, flange O-ring, and the lock ring to help complete installation into stock fuel tanks. Holley 525 PLH fuel pump module features: * 6061-T6 Aluminum fuel pump module with a 525 LPH (liters per hour) * Sniper pump assembly drops into stock EFI fuel tank on select vehicles * 6AN O-ring outlet and return ports for easy plumbing connections * Can be used with both carbureted and EFI (Electronic Fuel Injection) fuel systems depending on your needs * Supports up to 1200 EFI or 1450 carb (hp at 60 psi at 13.5 V/16.9 amp draw; individual systems will vary based on fuel system design, the regulator type, fuel cell location, etc.) * Flange is bright dip black anodized for corrosion protection from undercar moisture
( 2 )
$431.95
$387.95
Fuel tanks on older cars often fall victim to corrosion. Tanks Inc. Mustang universal large capacity fuel tanks are based off of the size of the 1970 Mustang and Cougar gas tanks and are fuel injection ready! They come with a 2 in. I.D. x 6 in. long fuel connecting hose. The neck and hose come straight up from the tank to connect to a filler cap of your choice and have EFI-style internal baffling.
( 5 )
$298.99
BBK Power-Plus Series throttle bodies have you covered when it comes to increased airflow for your late model vehicle. These Power-Plus units are cast from high-quality 356 aluminum alloy and are machined on state-of-the-art CNC centers to ensure a perfect fit on your car or truck. Their features include double-sealed bearings, O-ringed throttle shafts, and precision die-stamped linkages—so you know you're getting the best quality throttle bodies at the best value possible.
( 397 )
$279.99
—
$339.99
Need a fuel tank? There's only one place to get exactly what you need: Tanks Inc.! They offer a large variety of polyethylene, stainless steel, mild steel, and alloy coated steel reproduction gas tanks in applications set up to fuel many popular vehicles and even a few that are not-so-popular. So, whatever you desire to fit a tank to, be it a street rod, muscle car, classic truck, or that special ride, Tanks Inc. fuel tanks deliver the best quality and fit, blended with their knowledge and expertise, to power your project successfully. NOTE: These are standard stock replacement tanks for carbureted engine applications. If you have retrofitted your engine for electronic fuel injection, please see the Tanks Inc. EFI-Ready Fuel Tank options.
( 403 )
$298.99
—
$314.99
On Sale
Holley Sniper in-tank retrofit fuel pump modules offer the easiest way to convert your vehicle to an in-tank EFI fuel system. Available in return and returnless versions, these 340 lph pumps are easy to install with basic hand tools and require no welding or fabrication. They include a diecast pump hanger bracket to control pump vibration in a low-profile design that's perfect wherever space is at a premium. You can locate the module beside your existing sending unit anywhere in the tank and rotate it a full 360 degrees to work flawlessly with various plumbing and wiring configurations. Once the module is installed, all you need to do is connect your power source/ground and fuel lines. Up your fuel game with an assist from the Holley Sniper in-tank retrofit fuel pump modules best suited for your application. Features and specs include: * Models available for various fuel tank depths, including adjustable (7-12 in.) versions * The low-profile design is only 1.275 in. thick above the tank mounting surface for added clearance when needed * The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations * Diecast aluminum construction for corrosion resistance and long-lasting good looks
( 28 )
$315.95
On Sale
Weiand Street Warrior intake manifolds are designed for use on stock or stroker combinations and more efficient cylinder heads. With new cam designs came the need for Street Warrior intake manifolds to support these combinations. Designed with Computational Fluid Dynamics software, Street Warrior intake manifolds rise to the challenge and deliver the performance to conquer the competition. Do you want maximum horsepower and torque from today's engines? Then choose Street Warrior intake manifolds.
( 140 )
$424.95
$276.95
These Summit Racing™ throttle cable and kickdown cable Pro Packs have been put together to save you time and money when installing a throttle cable. They include a new Lokar braided stainless steel throttle cable, a throttle cable bracket, and a return spring, and they are also available with an automatic transmission kickdown cable. Don't worry--whether you're working on a Ford, GM, or Mopar, we will have you covered with one of these Summit Racing™ throttle cable and kickdown cable Pro Packs.
( 42 )
$258.66
—
$262.21
Summit Racing™ fuel tanks are designed to meet or exceed the quality of factory fuel tanks. Whether you have a track car, classic car, or car you're restoring, Summit Racing™ has the high-quality fuel tanks you're looking for.
( 229 )
$485.99
Dorman intake manifolds are precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. They are thoroughly tested to ensure top-quality OEM construction and superior reliability. Dorman manifolds are offered in different styles, and all will provide a trustworthy design with a perfect fit and reliable construction for your vehicle.
( 157 )
$294.95
—
$298.95
On Sale
JET Powr-Flo throttle bodies are direct replacements for factory units, and can be used to replace a worn-out throttle body or to upgrade your existing throttle body. They provide increased airflow for improved throttle response by taking advantage of JET's unique inlet design, and they include all new pre-installed calibrated electronics to allow for a simple "remove and replace" installation. JET Powr-Flo throttle bodies increase air velocity to the intake manifold, improving throttle reaction and provide horsepower throughout the entire rpm range. Order the JET Powr-Flo throttle body compatible with your vehicle.
( 110 )
$299.96
—
$367.46
$269.96
—
$330.71
aFe Magnum Force Stage 2 Pro 5R air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, the Stage 2 intakes feature aFe's Pro 5R air filters that improve airflow for increased horsepower and torque. These Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With five layers of progressively finer mesh cotton gauze media between a 100 percent polyurethane top and base, Pro 5R high-flow, oiled, conical filters are washable and reusable for multiple cleanings. Their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. In addition, a pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter.
( 67 )
$361.00
DeatschWerks fuels your passion for performance with fuel injectors specifically designed and engineered for your Sport Compact, Modern Muscle, and European vehicles. DeatschWerks fuel injectors are manufactured to fit your OE harness, fuel rail, and manifold. Because they are application-specific, you'll spend less time installing and tuning, so you can spend more time enjoying the increased performance of your ride! They provide an excellent spray pattern and atomization for optimized idle and tuning. Each set is flow-matched both statically and dynamically, and flow-balanced to within one to two percent. A flow report is included with each set of DeatschWerks fuel injectors.
( 69 )
$409.00
—
$479.00
On Sale
Built for power and show, K&N 69 Series Typhoon cold air intake kits are engineered to dramatically reduce intake restriction, resulting in additional horsepower and torque. These air intake kits primarily feature a free-flowing, mandrel-bent aluminum tube induction system designed to fit many performance vehicles. The Typhoon kits come in one of three designs: cold air intakes, short ram intakes, or complete cold air intakes—which can be configured as either cold air or short ram intakes. Some air intake models feature high-quality tube and end cap finish options, including polished aluminum, and black, blue, red, or silver powdercoated, among other options. Order the K&N 69 Series Typhoon cold air intake kit that is suited to fit your vehicle application.
( 462 )
$419.99
$369.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
