Availability
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 57 )
$199.99
—
$242.99
Stealth 340 pumps are high-output, in-tank, electric fuel pumps for fuel injected and carbureted applications. At a volume rate of 340 liters per hour. These universal pumps bolt into many existing hanger assemblies, and are a direct fit upgrade for many OE applications. These pump will support up to: * 1000 HP (carbureted/naturally aspirated) * 850HP (carbureted/forced induction) * 850HP (EFI/naturally aspirated) * 700HP (EFI/forced induction) * 700HP on E85 (carbureted/naturally aspirated) * 595HP on E85 (carbureted/forced induction) * 595HP on E85 (EFI/naturally aspirated) * 490HP on E85 (EFI/forced induction)
( 17 )
$138.99
Edelbrock Performer RPM street fuel pumps are designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high performance street fuel pumps feature a high-quality, 3-stage polished finish. The unique valve design improves flow quantity and quality—and will support engines with up to 600 hp. The high-volume, 3/8 in. NPT inlet and outlets surpass the capacity of many other pumps. Performer RPM street fuel pumps produce 6 psi and do not require a regulator; and the clockable lower housing can be rotated for the best inlet and outlet alignment. They're designed for use with gasoline only.
( 427 )
$186.95
—
$227.95
Summit Racing™ fuel tanks are designed to meet or exceed the quality of factory fuel tanks. Whether you have a track car, classic car, or car you're restoring, Summit Racing™ has the high-quality fuel tanks you're looking for.
( 229 )
$101.99
—
$217.99
On Sale
Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.
( 357 )
$249.95
$123.25
—
$249.95
BBK adjustable fuel regulators have CNC-machined billet aluminum housings and bases. They are fitted with precision diaphragms. Tuning can be done with a simple twist of a screw. Each unit is computer-machined for maximum performance and quality, and features an anodized finish for long-lasting good looks.
( 25 )
$169.99
BBK Power-Plus Series throttle bodies have you covered when it comes to increased airflow for your late model vehicle. These Power-Plus units are cast from high-quality 356 aluminum alloy and are machined on state-of-the-art CNC centers to ensure a perfect fit on your car or truck. Their features include double-sealed bearings, O-ringed throttle shafts, and precision die-stamped linkages—so you know you're getting the best quality throttle bodies at the best value possible.
( 397 )
$229.99
—
$279.99
UREMCO remanufactured carburetors are expertly built from core to finished product. Purchasing a reman carb can sometimes be iffy ... unless you choose wisely. United Remanufacturing Co. has over 60 years of experience in carburetor rebuilding. As fuel system rebuilders with expertise and stringent standards, they ensure you the best quality at the best price. They rebuild carburetors from most all automobile and truck manufacturers, and each one is individually inspected and rigorously tested on flow-bench engine simulators by seasoned and knowledgeable employees. All UREMCO carburetors come equipped with new needle and seats, base gaskets, gas filters, and accelerator pumps. The extensive process from disassembly, cleaning, and testing to final assembly restores these carburetors back to their original form, fit, and function. When you purchase a UREMCO remanufactured carburetor, you're buying quality, value, and, most importantly, peace of mind. Order the replacement model designed for your vehicle and engine application.
( 811 )
$140.50
—
$323.99
Edelbrock Victor Series racing fuel pumps free-flow 130 gph, outpacing conventional racing pumps which flow around 114 gph. These pumps are a necessity for drag racing, Circle Track, street machines, or any application that demands high-output fuel delivery. They have high-volume inlet and outlet orifices and produce 10 psi. Victor pumps are designed for use with gasoline and Edelbrock's fuel pressure regulators. Order the model recommended for your application.
( 29 )
$192.95
Aeromotive offers true billet fuel pressure regulators designed to meet the performance requirements of Ford engines. Their Ford fuel pressure regulators feature a stainless steel spring, custom-designed to provide the regulation required by Ford's 4.6 and 5.0L engines.
( 47 )
$217.99
These Summit Racing™ throttle cable and kickdown cable Pro Packs have been put together to save you time and money when installing a throttle cable. They include a new Lokar braided stainless steel throttle cable, a throttle cable bracket, and a return spring, and they are also available with an automatic transmission kickdown cable. Don't worry--whether you're working on a Ford, GM, or Mopar, we will have you covered with one of these Summit Racing™ throttle cable and kickdown cable Pro Packs.
( 42 )
$261.21
—
$262.21
Vortech crankshaft pulleys are made of 6061 T-6 aluminum that's hard anodized and built to SAE standards. They are CNC-machined for maximum surface contact and feature an improved belt traction profile.
( 11 )
$158.99
—
$249.99
Carter mechanical fuel pumps are 100 percent factory-tested and approved. They are available for most domestic and imported passenger cars, trucks, and industrial engines. Carter fuel pumps are offered in diecast as well as stamped steel to accommodate the wide variety of applications on the road. Stamped steel fuel pumps feature valve chambers with large diameter diaphragms for high-capacity and superior vapor handling characteristics. Their innovative design is utilized as original equipment by automobile manufacturers.
( 550 )
$110.99
—
$264.99
Need a fuel tank? There's only one place to get exactly what you need: Tanks Inc.! They offer a large variety of polyethylene, stainless steel, mild steel, and alloy coated steel reproduction gas tanks in applications set up to fuel many popular vehicles and even a few that are not-so-popular. So, whatever you desire to fit a tank to, be it a street rod, muscle car, classic truck, or that special ride, Tanks Inc. fuel tanks deliver the best quality and fit, blended with their knowledge and expertise, to power your project successfully. NOTE: These are standard stock replacement tanks for carbureted engine applications. If you have retrofitted your engine for electronic fuel injection, please see the Tanks Inc. EFI-Ready Fuel Tank options.
( 403 )
$164.99
—
$234.99
ACCEL fuel pressure regulators provide stable fuel pressure under the most demanding conditions. ACCEL fuel pressure regulators are available in both adjustable and non-adjustable models. Order the unit designed or your specific vehicle.
( 5 )
$145.95
On Sale
Mr. Gasket mechanical fuel pumps are rated from 80 to 110 gph in a variety of applications for many Chevrolet, Ford, Chrysler, and Pontiac V8 engines. Mr. Gasket fuel pumps are suitable for use with street performance and high-output racing applications when a mechanical pump is desired or required. Features include: * Shutoff pressure pre-set from 6.5 to 8 psi depending on application * Fuel pressure regulator is not required due to built-in shutoff * Heavy-duty aluminum construction for continuous high-rpm operation * Lower pump body can be clocked in different positions to adapt to orientation requirements * Inlets and outlets tapped for 1/4 in. or 3/8 in. NPT to match specific applications
( 32 )
$177.95
$142.15
—
$210.95
Delphi fuel pump module assemblies are nickel plated with all-steel internal components. They feature internal guide rod springs and external rubber feet for enhanced stability and reduced noise from vibration. These fuel pumps have little flow or pressure variation in hot fuel situations. Delphi fuel pump modules are designed to be OE replacements.
( 254 )
$103.99
—
$266.99
Dorman intake manifolds are precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. They are thoroughly tested to ensure top-quality OEM construction and superior reliability. Dorman manifolds are offered in different styles, and all will provide a trustworthy design with a perfect fit and reliable construction for your vehicle.
( 157 )
$122.95
—
$245.95
On Sale
Stop wasting money with a leaking fuel tank. The Scott Drake line of fuel tanks is seam-welded and pressure-tested extensively for integrity. They come available in either standard or stainless steel.
( 19 )
$222.95
$200.65
—
$261.95
On Sale
Holley Sniper stock replacement fuel tanks are designed to meet or exceed the quality of your factory original. Whether you have a track or street car, or a car you're restoring, Sniper has the high-quality fuel tanks you're looking for. Start your fuel system project fresh with a Holley Sniper stock replacement fuel tank—order the model designed for your application. Features include: The steel fuel tanks have a powder coated finish for corrosion protection and good looks. Stock replacement fuel tanks are made to oem specifications for a great fit for your ride. They are a perfect companion when using our Holley Musclecar EFI modules or our Retrofit EFI Pump modules. Tank sending unit lock ring is included Tank straps are not included
( 63 )
$174.95
$157.45
On Sale
Do you need to replace that beat-up air cleaner? Scott Drake offers original-style air cleaners that will clean up the ugliest of engine compartments. Scott Drake manufactures these air cleaners using quality materials, ensuring years of performance.
( 135 )
$199.95
$179.95
Carter inline electric fuel pumps are quality replacements to deliver fuel at the precise pressure and flow rate your vehicle demands. With a low amp draw, high free-flow, and consistent fuel pressure, these pumps will keep your engine well-fed. Universal and vehicle-specific models are available.
( 80 )
$101.99
Standard Motor intake manifold runner control valves are direct-fit replacements for OE damaged units to provide proper data regarding linkage and plate position to the powertrain control module. Designed to restore fuel efficiency, eliminate stuttering, and revive engine performance, every intake manifold runner control solenoid is manufactured with high-grade materials for prolonged life and superior performance in harsh environments. OE-quality connectors and terminals ensure a perfect fit connection to the engine wire harness. Order the model for your application.
( 2 )
$211.99
Clearance
Carter OE replacement electric fuel pumps are manufactured in a plant that is TS16949 certified and provides the absolute latest in OE-quality certifications. This dedication to excellence, combined with in-depth OE experience, results in products that provide dependable performance that meet or exceed expectations. Carter OE replacement electric fuel pumps feature: * Factory-specified pressure and flow * OE-matched electrical connections * Accurate diameter and length * Original inlet and outlet positions * 100 percent factory-tested reliability * Roller vanes, which are more contaminant-tolerant than other designs * Carbide and brass bearings instead of plastic for longer life and smoother operation
( 185 )
$100.99
—
$269.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
