MAZDA MIATA - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converters

MagnaFlow California Grade CARB Compliant direct-fit catalytic converters comply with California Air Resources Board (CARB) emissions regulations, which require more precious metals and rigorous testing, plus the direct-fit means an easier bolt-on install for you. Choose the perfect fit for your vehicle. Features include: * Stainless steel construction * CNC-precision robotic manufacturing * Limited 5-year/50,000 mile warranty

2.67 out of 5 stars ( 3 )

$935.00

Wilwood Forged Dynalite Big Brake Front Brake Kits

With Wilwood Forged Dynalite Big Brake front brake kits, you'll be ready for show, street, or strip! Track-ready performance and high-tech style come with oversized rotors, forged billet Dynalite calipers, and high performance Wilwood SmartPads. These front brake kits are fully compatible with OE master cylinder output. Options for the caliper finish and rotor design make it simple to match the brake response and style preferences on all types of daily drivers, race vehicles, and ultra-styled show machines! The choice is yours for big stopping power--choose Wilwood Forged Dynalite Big Brake front brake kits.

4.65 out of 5 stars ( 133 )

$905.70

—

$937.05

Rhodes Race Cars Lemons and Chumps Roll Cages

Rhodes Race Cars Lemons and Chumps roll cages are specifically designed for those of you looking to compete in 24 Hour of Lemons and ChumpCar Series races. RRC has taken out all of the guess work and come up with these easy-to-install kits. All the tubing is pre-bent and notched for ease of installation. Rhodes Race Cars Lemons and Chumps roll cages are available in ERW mild steel, DOM, and chromoly. ERW mild steel is accepted by both sanctioning bodies, but DOM is very strongly recommended. Chromoly is generally NOT recommended for this type of racing. Check your sanctioning body's rules before you order! Note: Some minor trimming may be required during installation. All RRC cages are weld-in cages.

1.4 out of 5 stars ( 5 )

$824.95

—

$974.95

Rhodes Race Cars Competition Roll Cages

Rhodes Race Cars competition roll cages meet or exceed NHRA and IHRA requirements (when properly installed). Available in 4, 6, 8, and 10-point models, all RRC bars are precision bent for each particular body style and feature notched tube ends (where applicable) for ease of installation. Increase chassis stiffness, and race safe with Rhodes Race Cars competition roll cages. RRC roll bars and cages are available in the following materials: * 1-3/4 in. x .134 in. wall mild steel tubing * 1-3/4 in. x .120 in. wall DOM tubing * 1-3/4 in. x .083 in. wall 4130 chromoly tubing The 4-point kits include main hoop, rear braces, seat crossmember, and four steel mounting plates. The 6-point kits include main hoop, rear braces, side bars, seat crossmember, and six steel mounting plates. The 8-point kits include main hoop, rear braces, side bars, frame supports, seat crossmember and 6 steel mounting plates. The 10-point kits include everything in the 8-point kits, plus a roof hoop, windshield runners, and dash crossmember. Note: Because of differing driver positions and main hoop locations, roof hoop and windshield down bars are not notched!

3.69 out of 5 stars ( 143 )

$849.95

Rhodes Race Cars SCCA, NASA, and Drift Roll Cages

Rhodes Race Cars SCCA, NASA, and Drift roll cages are made specifically for hobbyists and for serious racers looking to compete in SCCA, NASA, or Formula D events. All road race cages feature a main hoop diagonal and dual door bars (can be made into dual X-bars). They are weld-in cages and feature notched tube ends (where applicable) for ease of installation. Roll cages are offered in these materials: * 1 5/8 in. O.D. 0.134 in. wall ERW mild steel tubing * 1 5/8 in. O.D. 0.120 in. wall DOM tubing * 1 5/8 in. O.D. 0.083 in. wall 4130 chromoly tubing DOM tubing is very strongly recommended; ERW cages will most likely NOT pass tech inspection for most classes. Chromoly is not recommended by most sanctioning bodies. Due to different requirements for specific classes and weights, you should check with your track or sanctioning body for specific guidelines prior to purchase. It is the installer's responsibility to assure that a cage meets race organization rules as to tubing material and sizes, fit, placement of components, and welding. Note: Because of differing driver sizes and main hoop locations, roof hoop and windshield down bars are not notched. Some minor trimming may be required during installation.

5.0 out of 5 stars ( 2 )

$824.95

—

$974.95

Whiteline Sway Bars

Whiteline sway bars are designed and engineered to dramatically improve grip, handling, and outright performance. Available for front or rear sway bar applications, depending on your suspension part needs, these anti-sway bars will bring out the absolute best-handling performance possible in your vehicle. So, when you are servicing your sway bar assembly, choose these high-quality sway bar components from Whiteline—the suspension experts! Order the sway bar model designed for your specific part application needs.

4.5 out of 5 stars ( 26 )

$793.88

MagnaFlow Street Series Performance Exhaust Systems

MagnaFlow Street Series performance exhaust systems deliver the smooth, deep sound you want—and the wide-open performance power you need! They feature straight-through flow designs for the ultimate in unrestricted horsepower and torque, while maintaining exhaust efficiency. These kits are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Street Series components are built with 409 stainless steel and all mandrel-bent tubing. They're available in numerous configurations, including cat-back, rear axle-back, crossmember-back, and rear section; single, dual, tri, or quad turbo mufflers; and several outlet and tip options. Order the MagnaFlow Street Series performance exhaust tailored for your specific make and model. The systems carry a lifetime construction warranty.

4.4 out of 5 stars ( 613 )

$865.00

South Bend Clutch Stage 3 Daily Driver Clutch Kits

South Bend Clutch Stage 3 Daily Driver clutch kits are recommended for single mass flywheel (SMF), when original design is dual mass flywheel (DMF). These clutch packages are designed for high-horsepower vehicles desiring a start performance similar to OE. The pressure plate is race engineered (SS) and SFI-approved with significant load increase over stage 1 and 2 pressure plates (+600-800 lbs.). Expect a pedal effort increase of 20 to 25 percent. Discs are assembled with heat-treated wear-resistant hubs, as well as drive plates and springs for high-load transfer and dependable operation. The sprung centers on the disc, in conjunction with the marcel fin between the linings, create a dual dampening effect that simulates OE start performance. A performance organic friction material with a high metal content increases torque and rpm capability—and maintains low operating temperatures, which reduce wear and glazing. South Bend Clutch Stage 3 Daily Driver clutch kits are the perfect match for your high performance street machine and occasional track use. Order the kit recommended for your application.

Not Yet Reviewed

$754.35

—

$870.41

South Bend Clutch Stage 3 Endurance Clutch Kits

South Bend Clutch Stage 3 Endurance clutch kits are recommended for single mass flywheel (SMF) when original design is DMF (dual mass) to achieve optimal performance. These kits use the same race-engineered SFI-approved pressure plates as Stage 3 Daily Driver packages. The disc is designed for the special needs of a vehicle with circuit racing in mind. Kevlar® friction material is used for its unique friction compounds applied with high-energy levels. This translates to a perfect transition from one gear to the next. Discs are assembled with only performance components and equipped with torsion springs functioning as a damper between engine and gearbox. These Stage 3 Endurance clutch kits are recommended for applications such as rally, endurance race, club sport, autocross, performance street and daily driving. Order the kit you need.

5.0 out of 5 stars ( 2 )

$812.38

—

$928.43

South Bend Clutch Stage 4 X-Series Clutch Kits

South Bend Clutch Stage 4 X-Series clutch kits are build-to-order clutch packages for vehicles modified to exceed Stage 3 hp parameters. The kits include a steel, single mass, SFI-approved flywheel for safety. The race-engineered pressure plate is modified for maximum plate load, and helps to deliver more transmittable torque, stability, extended life, and superior thermal resistance. The South Bend Clutch Stage 4 X-Series clutch kits provide noticeably better dynamics through higher clamp loads, when driving your vehicle to its limits. Order the Stage 4 X-Series clutch kit recommended for your specific vehicle and engine size. Features, items, and specs include: * Puck-style disc offered in sprung and un-sprung options * Graphite-impregnated ceramic or sintered iron friction material options * Torque ratings calculated at time of ordering * Engagement characteristics can be abrupt * Meticulous processing and advanced packaging materials

Not Yet Reviewed

$812.38

—

$986.46

South Bend Clutch Stage 3 Drag Race Clutch Kits

South Bend Clutch Stage 3 drag race clutch kits are powerfully built with heavily modified vehicles in mind—particularly those built for 1/4 and 1/8 mile tracks. They include a single mass SFI-approved flywheel with each kit, which is typically required for drag racing when the original design is dual mass. The pressure plate is race cover engineered to keep the clutch pedal travel short and quick. South Bend Clutch Stage 3 drag race clutch kits are recommended for drag racing, pulling, and drifting. Order the clutch kit recommended for your specific vehicle and engine size. Features, items, and specs include: * Puck-style disc reduces rotational mass and is assembled with all high-carbon components for maximum strength * Graphite-impregnated ceramic friction material perfectly suited for drag racing (maximum friction co-efficient, rapid heat dissipation, and abrupt engagement characteristics) * Meticulous processing and advanced packaging materials

Not Yet Reviewed

$870.41

—

$986.46

Standard Motor Idle Air Control Valves

Standard Motor Products replacement idle air control valves help you get maximum fuel efficiency and power from your engine. A properly operating idle air control valve is an essential component to helping your vehicle run flawlessly. These valves are often referred to as idle air control or IAC valves (GM), automatic idle speed or AIS valves (DCX), and throttle air bypass solenoid or AIR valves (Ford). These idle air control valves are used on both throttle body and multi-port fuel injected engines to regulate idle speed. The IAC valves open a small bypass circuit that allows air to flow around the throttle. Increasing the volume of air that's allowed to bypass the throttle increases idle speed. The engine's computer controls the IAC valves, if idle speed is out of range, and commands the IAC valves to either increase or decrease the bypass airflow. Replace your vehicle's worn or malfunctioning idle air control valve with these reliable Standard Motor Products replacement IAC valves.

4.7 out of 5 stars ( 56 )

$842.99

PWR North America OE Fit Radiators

Optimize your cooling power with PWR North America OE fit radiators. They are built using the latest aluminum core designs and manufacturing techniques by highly skilled fabricators and welders. These PWR OE fit radiators bolt directly to your stock core support for an accurate fit and a hassle-free installation. PWR North America is a world leader in providing quality cooling solutions designed to meet demands across a wide range of industries. Select the OE fit radiator that is suited to your application needs.

Not Yet Reviewed

$989.00

Standard Motor Combination Switches

Standard Motor combination switches keep several functions at your fingertips. Having one switch to activate different accessories--headlight control, turn signals, and windshield wipers--has proven effective and efficient for drivers. SMP combination switches replace faulty ones and restore operation, with a robust design created from high-grade materials that meet stringent demands. Stay focused on the road, knowing that the levers on your column will operate the wipers, washers, blinkers, and headlight beams appropriately, with Standard Motor combination switches.

4.29 out of 5 stars ( 17 )

$774.99

PowerStop Z17 Evolution Plus Stock Replacement Brake Kits with Calipers

PowerStop Z17 Evolution Plus stock replacement brake kits with calipers have everything you need for an easy, bolt-on solution for your daily driver. They include Z17 Evolution Plus ceramic pads, Autospecialty brake rotors, and non-coated replacement calipers, along with stainless steel hardware. If you need a complete, fast, and easy solution that meets original equipment standards, then PowerStop's Z17 Autospecialty brake kits with calipers are the ideal choice to refresh your braking power. (Some models may include rotors for only the front or only the rear.)

4.26 out of 5 stars ( 47 )

$827.92

MAZDA MIATA Parts and Accessories