Availability
Showing In Stock Items. Show All 157 Items.
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1973 )
$140.95
—
$199.95
$109.95
—
$179.95
On Sale
These MSD Ford Blaster Coil-on-Plug ignition coil packs feature a patented winding design and direct bolt-in replacement. The improved spark energy and voltage of the coil packs, combined with their reliability, have made them a favorite of performance enthusiasts. They are designed as direct bolt-in replacement coils for many SOHC Ford V8 modular engines. The housing and installation are the same as the factory coils, but that is where the similarity ends. Inside the MSD coil packs, engineers used better quality materials to assemble the primary and secondary windings. The MSD Ford Blaster Coil-on-Plug ignition coil packs take the spark energy right out of the coil and put it across the plug gap to improve the combustion and output of the engine.
( 364 )
$282.95
$254.65
On Sale
B&M Z-Gate automatic shifters operate just like those high-dollar, gate-type racing shifters, yet cost much less. Made for street and mild competition, the Z-Gate shifters have an NHRA/IHRA-accepted reverse lockout, a neutral safety switch, a backup light switch, and a universal plastic console. Their patented "Z" shaped architecture totally eliminates the possibility of overshifting and missing a gear.
( 42 )
$318.95
$239.95
On Sale
MSD's high-grade steel distributor gears are burnished for a smooth, scuff-free finish, and are machined for precise gear mesh. Excessive clearance causes timing fluctuation throughout the rpm range, resulting in lost horsepower, so MSD also designed these gears for tighter mesh between the camshaft and distributor drive gears.
( 33 )
$142.95
—
$155.95
$128.65
—
$140.35
On Sale
Flowmaster Super 44 Series mufflers use the same technology as the original Super 40 mufflers—but also offer some distinct advantages. The Super 44s deliver a deep, rich tone with an improved flow path radius, optimum internal flow, and sound control engineering, all created with Delta Flow technology. They're the most aggressive, deepest sounding, highest performing 4 in. case street mufflers that Flowmaster has ever built. These American-made, all-black mufflers exceed OEM specifications for use on street cars, race cars, and sport trucks. Super 44s are ideal when dynamic sound, torque, and horsepower improvements are demanded in a smaller high performance muffler. Their maximum performance and improved flow path will generate more torque and power than ever before! If you really want to hear your exhaust system inside as well as outside of your vehicle, then order the Flowmaster Super 44 muffler best suited to fit your application.
( 398 )
$134.95
$121.45
On Sale
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 805 )
$114.95
—
$326.95
$103.45
—
$251.95
On Sale
Flowmaster 50 Series Delta Flow mufflers are designed to produce a mellow, deep sound. They're milder on the outside of the vehicle than the 40 Series mufflers and are significantly quieter on the inside. These mufflers combine the increased horsepower and torque you've come to expect from Delta Flow technology with the performance sound and feel that makes Flowmaster famous.
( 367 )
$184.95
$166.45
On Sale
Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.
( 357 )
$136.95
—
$249.95
$123.25
—
$224.95
On Sale
B&M offers a full line of shift levers, cable brackets, and assorted linkage components everything you need for installing your B&M shifter. Or they can be used as replacements for lost or damaged parts. B&M parts are made to fit a wide variety of applications, so you're sure to find what you need.
( 187 )
$131.95
$118.75
On Sale
Hays heavy-duty flexplates for high performance and competition engines are constructed from a thicker-than-stock steel plate. This enables them to withstand the stress of high-stall torque converters and high-rpm engines. While factory stock plates tend to crack around the crankshaft hub when punished under high-torque and rpm conditions, the thicker Hays flexplates can handle the force. These heavy-duty flexplates are supplied with a ring gear that is securely welded in place. All Hays heavy-duty flexplates are zinc-dichromate plated to resist corrosion and SFI-certified under specification 29.1.
( 63 )
$157.95
—
$222.95
$142.15
—
$200.65
On Sale
WeatherTech seat protectors are the perfect accessory for owners needing protection for their front and rear vehicle seating. These seat protectors are made from a poly/cotton twill fabric with a durable water-repellent finish that will combat any juice box spill, cereal crumbs or pet mess! They also feature an extra-layer of nylon lining to further protect the covered seat(s). Additional features of WeatherTech seat protectors include: * Semi-custom to fit the size and type of most year 2000 vehicles * Fits most bench and bucket-style front and rear seats * Quick and easy installation, as well as easily removable for cleaning * Stays in place with durable straps, specialty inserts and a non-slip bottom * Seat protector is machine washable and reusable Please note: you must have a headrest on the seatback of your vehicle for the WeatherTech Seat Protector to strap on to. Also keep in mind, if your vehicle is equipped with a center seatbelt, it will not be accessible with installation of the seat protector.
( 14 )
$138.95
—
$201.95
$125.06
—
$181.76
On Sale
These great looking three and four-speed automatic floor shifters feature an 11 in. chrome plated solid steel stick with knob and stop bolts for positive shifting. They include the shifter boot with bezel, linkage, and mounting hardware.
( 41 )
$170.95
$128.95
On Sale
JET Powr-Flo mass airflow sensors are designed to deliver improved horsepower, torque, and mileage from your car, truck, or SUV by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET mass air sensors provide airflow increases of up to 45 percent and installs in 10 minutes or less. They are compatible with other aftermarket upgrades including but not limited to: Performance tuning (chips, modules, etc.), exhaust modifications (cat-back, headers, etc.), cold air intakes, and ignition systems. Order the model designed to fit your needs.
( 245 )
$194.96
—
$322.46
$175.46
—
$290.21
On Sale
Flowmaster Stainless Steel Super 44 mufflers offer distinct advantages over original 40 Series mufflers, while using the same technology. The Stainless Steel Super 44 mufflers deliver a deep, rich tone with an improved flow path radius, optimum internal flow, and sound control engineering, all created with Flowmaster's Delta Flow technology. They are the most aggressive, deepest sounding, highest performing 4 in. case street mufflers that Flowmaster has ever built, exceeding OEM specifications for use on street cars, race cars, and sport trucks. They are ideal when dynamic sound, torque, and horsepower improvements are demanded in a smaller high performance muffler. Their maximum performance and improved flow path will generate more torque and power than ever before! If you really want to hear your exhaust system inside as well as outside of your vehicle, then these Stainless Steel Super 44 Flowmaster mufflers are for you.
( 112 )
$136.95
$123.25
On Sale
These Super 40 Flowmaster mufflers significantly outflow the older two-chamber mufflers. They help create even more horsepower with less interior noise and a deeper exterior sound. These mufflers feature a design patterned after Flowmaster's race mufflers. These Flowmaster mufflers far exceed older models on Dyno tests. They create a beautiful hot rod sound, along with increased horsepower and gas mileage. So, if you want to get that hot rod sound and add some horsepower, then these Flowmaster mufflers have you covered.
( 185 )
$149.95
—
$166.95
$134.95
—
$150.25
On Sale
Flowmaster Super 40 Series Delta Flow mufflers go a step beyond their original 40 Series product. By precisely placing three internal baffles in the case, and welding them to exacting specifications, the 40 Series Delta Flow mufflers not only out-scavenge the originals, but they also provide superior reductions in exterior sound levels and resonance, which are transmitted through the exhaust system and into the vehicle. You get all this, plus improved torque and horsepower—and that famous Flowmaster sound!
( 144 )
$149.95
—
$166.95
$134.95
—
$150.25
On Sale
ACCEL Performance replacement distributors are perfect for your daily driver or street machine. They're built with all-new components and high performance ACCEL electronics. Each model's design features the materials and accessories that make for an easy installation while providing the fit, form, and function you need. Order the ACCEL Performance replacement distributor designed for your engine when you need a quality substitute or want better performance.
( 152 )
$276.95
$249.25
On Sale
Do you have a street rod, muscle car, or sport truck? Whatever your choice, Vision American Muscle 141 Legend 5 series wheels are sure to add the styling that you desire. A classic design, coupled with one-piece cast construction and a beautiful gunmetal finish, makes Vision Wheel 141 Legend 5 an all-around great wheel choice. These wheels are designed to be used with 3/4 hex head lugs or smaller. Add a set to your next project or current ride and you're sure to be pleased.
( 110 )
$160.99
$132.48
On Sale
ACCEL Extreme 9000 ceramic wires are the cure for burnt spark plug boots. These wires provide excellent energy delivery while providing the highest level of RFI/EMI suppression. They're ideal for custom engines, boats, and RVs—plus great trackside accessories when you need to make up a replacement wire. ACCEL Extreme 9000 ceramic spark plug wire sets are available straight or in right-angle configurations. Order the set recommended for your vehicle and engine application. More product features include: * Finished with stainless steel spark plug terminals and ceramic spark plug boots * Each wire features ultra-high temperature double silicone wire rated at 600 degrees F * Ferro-Spiral core wire developed for performance use * Capable of withstanding up to 2,000 degrees F
( 463 )
$218.95
$120.95
On Sale
SCT Performance blank dropship-only computer modules are shipped to you blank, so that your custom tuning provider can install the programming you need for your engine.
( 2 )
$220.00
$169.99
On Sale
Vision American Muscle 141 Legend 5 Series black wheels are the perfect look for your hot rod. These wheels fit everything you've got. Old-school looks in new-school technology are yours for the taking. Go ahead and show off! You know you want to.
( 23 )
$148.99
—
$166.99
$132.48
—
$139.72
On Sale
Looking for the most aggressive sound in the Flowmaster muffler line? Then take a look at Flowmaster stainless steel 40 Series mufflers. Designed for use on street and strip vehicles, they take the sound waves produced in the exhaust, and cancel them against angled baffles built into the muffler case. This improves both horsepower and fuel economy. Best of all, these mufflers allow you to hear that cool Flowmaster tone inside of the vehicle, as well as outside of it. So, if you want more power and less noise, then you need to acquire these Flowmaster stainless steel 40 Series mufflers.
( 59 )
$132.95
$119.65
On Sale
These 70 Series Big Block II mufflers are designed around a large case for maximum volume and efficiency. They're 2 in. narrower than the original Big Block muffler, making them easier to install into tight areas. Other features include a mild, mellow exhaust tone and a resonant tuning chamber for reduced interior sound levels.
( 124 )
$243.95
$219.55
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components--especially when they improve performance like these MSD direct replacement ignition coil packs. They are designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and improved midrange rpm power.
( 60 )
$237.85
—
$326.95
$201.95
—
$244.75
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
