Availability
Showing In Stock Items. Show All 78 Items.
Clearance
NTK is the world's leading supplier of OEM oxygen sensors. They're individually tested to ensure the highest level of quality and reliability—designed to continuously detect the composition of exhaust gases. As the output from the sensors changes, the ECU instructs the fuel mixing system to alter the mixture. This ensures that the air/fuel mix is always correct and promotes efficiency. A new NTK oxygen sensor can help lower emissions, improve fuel mileage and engine efficiency, and extend catalyst life. These components meet or exceed OE specs and are equipped with waterproof, factory-fitted connectors to ensure a perfect fit every time. Order the model recommended for your vehicle.
( 85 )
$35.99
SCT X4 OBD II cables will keep you connected to your vehicle. The cable that came with your X4 is missing, or maybe it's damaged. No problem--SCT has HDMI/OBD II replacements that will once again allow you to easily and quickly install your X4 to the port on your vehicle. Power up your device with genuine SCT Performance X4 OBD II cables.
Not Yet Reviewed
$28.99
Motorcraft oil pressure switches will fix your jumpy gauge and prevent misreadings. Without the proper amount of oil, your engine will experience a lot of damage. If the oil light blinks or comes on, but the oil levels in the engine are fine, then a faulty oil pressure sensor may be to blame. Replace your faulty switch with genuine Motorcraft equipment, designed for durability and electrical performance.
( 13 )
$22.99
Clearance
Dozens of sensors, lights, motors, and switches—nearly every accessory on your vehicle is powered through a wiring circuit. When any of those electrical components begin to fail, Motorcraft wiring connectors can help restore proper operation. For repairs or replacement on Ford, Lincoln, and Mercury vehicles, in particular, Motorcraft carries a full line of wiring pigtails and connectors for countless applications, using technologies that exactly replicate the OEM products. Depend on Motorcraft for precision electrical parts with the fit, form, and function you need!
( 8 )
$74.99
$23.99
—
$42.50
Clearance
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 95 )
$31.99
—
$47.99
SCT Livewire TS+ window mounts are designed specifically to help utilize all of the innovative features of your Livewire TS+ tuner/programmer. Use these mounts to attach your module to the vehicle window, so you can easily and safely read the display at a glance. You can affix the Livewire TS+ vertically or landscape-style for the perfect viewing angle. Keep your real-time gauges and data monitoring safely visible with SCT Livewire TS+ window mounts.
Not Yet Reviewed
$25.79
On Sale
ACCEL C-Cut Performance spark plugs ignite a better path to high performance for both street and strip applications. Their ground strap aligns with the centerline of the electrode to create a much-improved electrical pathway. This design reduces quenching, shrouding, and obstruction, allowing a hotter, larger flame, better firing energy, and a complete burn. Unshroud the spark to ignite your vehicle's performance; order the ACCEL C-Cut Performance spark plugs designed to fit your engine. More product features include: * Greater fuel efficiency, reduced emissions, increased performance, and better throttle response * Helps eliminate misfiring, rough idle, and overall poor performance * Copper core outperforms iridium and platinum * Machine-rolled threads protect your valuable cylinder heads * Sizes and sets available for thousands of applications
( 396 )
$32.89
—
$46.10
High-quality, direct-replacement Standard Motor wiring connectors help eliminate the need for a harness by letting you swap only the damaged connector for a cost-effective repair solution. The terminals feature high-grade materials like copper alloy, brass, and phosphor bronze. Together they provide the connectors with prolonged life and superior performance in harsh environments for each specific application. Standard Motor electrical connectors are 100 percent tested for the proper mechanical and electrical fit, form, and function for your vehicle.
( 140 )
$21.99
—
$47.99
Essential replacement items, Dorman ignition switches enable engines to turn over upon startup, restoring drivability. They also unlock the power accessories. These switches are engineered from high-quality materials for long lasting reliability. Features include: * These parts undergo rigorous quality inspection to ensure high quality * Where applicable, includes bezel for a complete repair * Easy to install * Direct replacement for a proper fit
( 9 )
$38.99
Putco LED light bulb load resistor kits are designed to eliminate LED-related turn signal problems such as hyper flashing or burned-out bulb indicators. They are rated at 6 ohms and can be used with most import and domestic vehicles.
( 5 )
$26.99
—
$37.99
Dorman fuel pressure sensors effectively measure fuel pressure in the fuel rail, alerting both the EVAP system and the fuel system to leaks. Restore engine performance with Dorman sensors.
( 1 )
$47.99
Dorman air conditioning pressure sensor switches are the fix for corroded or a broken connector on the original switch. These A/C transducer switches are designed to restore your vehicle's air conditioning. Quality-made and tested to ensure proper OE fit, form and function, these direct replacement sensor switches are easy to install, no special tools required.
( 1 )
$46.99
These Delphi camshaft position sensors feature a digital output design for maximum signal to noise ratio. They are not impacted by temperature changes and provide long-lasting sensor protection. These Delphi camshaft position sensors are also manufactured to meet or exceed OE requirements to ensure quality and long-lasting durability.
( 13 )
$22.99
Failure or poor performance from a coil can result in a misfire, a rough-running, hard-starting engine, and excessive emissions. Astemo ignition coils provide the performance needed to help keep vehicles running the way that they were designed. The Astemo ignition coils feature a durable construction to ensure maximum reliability and a longer service life, and when combined with the correct spark plugs, they provide consistent voltage and amperage output, thus ensuring efficient combustion, as well as smooth power delivery. Choose the Astemo ignition coil model designed for your application needs.
( 10 )
$42.99
NGK Laser Iridium spark plugs feature laser-welded technology. Lasers are used to pinpoint precision welds, reducing excess debris; this decreases the required voltage to bridge the spark gap. An iridium disc is welded on the center electrode and a platinum disc is welded on the ground electrode, reducing the wear rate of both surfaces and ensuring great durability and long life. These spark plugs are available for use with a variety of engine types.
( 75 )
$21.99
Clearance
NGK ignition coils are designed to precisely control the spark intensity, delivering optimum power and the quality you expect from NGK. These replacement coils are designed to exceed OEM specifications for accurate, maintenance-free operation. They're easily installed and provide longevity and durability of your spark energy. NGK offers ignition coils as individual replacements or in a Multi-Pak for convenience and to maintain a proper service procedure.
( 58 )
$77.99
$39.50
Standard Motor ABS speed sensors supply information regarding wheel movement to the ABS computer. They're often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again. Replacement ABS speed sensors are available for hundreds of makes/models. Just match up your vehicle specs to order the correct unit.
( 16 )
$22.99
—
$41.99
Replace your worn or malfunctioning vehicle speed sensor with one of these Standard Motor Products vehicle speed sensors. Depending upon a vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early-model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points. Don't take chances with your vehicle's performance--insist on Standard Motor Products quality vehicle speed sensors.
( 15 )
$42.99
Delphi offers knock sensors for a wide variety of vehicles and engine types, including two-stroke, alternative fuel, diesel, and flexible fuel engines. The Delphi knock sensors offer several benefits including maximizing engine performance with all fuels, to help prevent engine damage from pre-ignition knocking, and ensuring accurate signals for optimal engine operation. They also help improve fuel efficiency and reduce emissions by adjusting ignition timing to avoid knocking combustion. Delphi's ever growing portfolio of high-quality vehicle sensors are backed by their stringent OE development and product validation methods. Select the sensor designed for your application.
Not Yet Reviewed
$49.99
Delphi vehicle speed sensors offer an accurate, clean signal input to your vehicle's ECM. Their designed digital output gives the maximum signal to noise ratio and they will maintain optimal performance during drastic temperature changes for robust, long-lasting sensor protection due to their single-element design. Delphi vehicle speed sensors provide quality materials, extended life, improved reliability, and superior drivability.
Not Yet Reviewed
$41.99
Delphi ABS wheel speed sensors meet your OE requirements and those of your wallet. Delphi speed sensors provide accurate, clean signal input to your vehicle's ECM. Designed for the maximum signal to noise ratio, these ABS wheel speed sensors are not impacted by temperature changes and provide robust, long-lasting sensor protection. When it's time to replace, choose Delphi ABS wheel speed sensors for reliability and superior drivability.
( 1 )
$24.99
—
$48.99
Delphi engine crankshaft position sensors exceed OE requirements and undergo certified electrical testing. They feature enhanced sensing functionality that delivers reduced emission, improved reliability, and superior drivability. Delphi engine crankshaft position sensors are not impacted by temperature changes and provide robust, long-lasting sensor protection. Choose Delphi for the OE replacement parts that your car was born with.
( 16 )
$22.99
Denso camshaft positioning sensors detect camshaft rotation during the engine-combustion cycle. Denso produces both magnetic resistant element (MRE) type and magnetic pick-up (MPU) type sensors. Features and benefits of Denso camshaft positioning sensors include: * Denso MRE sensors have a pair of MREs on an integrated circuit (IC) chip; this unique design is extremely accurate, even just after an engine is started * The molded IC chip is installed inside a cylindrical magnet so it is positioned closer to the gears that rotate with the camshaft--this design is almost 10 times more sensitive than Hall element type sensors * Denso uses a polyphenylene sulfide resin coating over the molded IC chip and cylindrical magnet for greater strength and superior resistance to substances like fuel, engine oil, and emission byproducts
Not Yet Reviewed
$23.99
—
$46.99
Four Seasons engineers and tests their harness and wiring connectors to provide years of trouble-free operation with your vehicle's relays. They feature OE-style connectors, molded plastic construction, quality contacts to ensure proper conductivity, and application-specific designs. The connectors are available for dozens of functions on thousands of vehicles.
Not Yet Reviewed
$40.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
