Availability
Showing In Stock Items. Show All 30 Items.
On Sale
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 22 )
$999.95
$898.95
On Sale
These Quick Fuel SS-Series carburetors are designed to offer the power of a race carburetor in a streetable package that weighs 5 lbs. less than other carburetors. Manufactured completely from aluminum, they allow you to change the idle feed and offer power valve channel restrictions and idle and high-speed air bleeds for the ultimate in tunability. The solid-state, electric-choke Quick Fuel SS-Series carburetors have billet throttle bodies, billet metering blocks, 4-corner idle systems, secondary jet extensions, and notched secondary floats. The vacuum secondary carburetors feature fuel bowls with a single-sight glass window, while the mechanical secondary carburetors have dual-inlet, dual-sight glass 4500-style fuel bowls and include additional links to tune the secondary opening rate. Quick Fuel has done it--they've created all-aluminum Super Street carburetors that are perfect for your high performance street machine.
( 48 )
$999.95
$853.95
—
$949.95
Eaton Detroit lockers are designed to maximize traction by delivering 100 percent of the torque and power to both drive wheels. They are engineered to keep both wheels in a constant drive mode and have the ability to automatically allow wheel speed differentiation when required.
( 80 )
$884.99
Richmond Gear Pro Gear ring and pinion sets take it a step further. The gear sets are designed for race use only where hard launches and severe heat cycling occurs. They're made from a softer, more malleable 9310 steel alloy to be more resistant to breakage under harsh racing conditions. These gears feature an outstanding rotating weight loss of up to 6 pounds, ground pinion threads for trouble-free installation, and a special heat treatment for improved strength.
( 44 )
$559.99
—
$817.99
On Sale
Legendary performance offering more value—Quick Fuel Street-Q carburetors deliver the power without the price. How? By retaining what's most important: the function. Street-Qs feature lightweight cast aluminum metering blocks and cast throttle bodies instead of billet components, so they cost less. But, the Q-Series performance remains: 2-circuit metering, down-leg boosters, changeable idle, high-speed air bleeds, and 4-corner idle. Plus, their universal throttle lever design accommodates Ford A/T kickdowns, 700-R4 bracket mounting holes, and the ability to mount brackets for Chrysler vehicles. Quick Fuel Street-Q carburetors fuel your passion and your budget with race-bred performance at no-frills pricing. Order the model designed for fitment on your vehicle application.
( 26 )
$849.95
—
$899.95
$763.95
—
$808.95
On Sale
Get big-time performance with Quick Fuel Q-Series 4-barrel carburetors with high-flow main bodies, which include either down-leg or annular boosters, screw-in idle and high-speed air bleeds, accelerator pump discharge nozzles, and a blended venturi area. These carburetors have CNC-machined billet metering blocks with 4-stage emulsion to provide more precise fuel metering, improve throttle response, and give a more uniform fuel performance curve. With so many great benefits and their blend of performance and drivability, it's no wonder that these Quick Fuel Q-Series carburetors are the popular choice. So, go ahead--throttle it up with Quick Fuel!
( 46 )
$1,099.95
$988.95
Griffin Performance Fit combos offer the right fit with the right performance--and the right price! These high performance combos deliver cooling capability for extreme horsepower mixed with modern styling, do-it-yourself installation, and American craftsmanship. In these perfect combinations, Griffin packages their lightweight aluminum radiators constructed with 1.25 or 1.50 in. induction-welded MegaCool tubing, high performance electric fans, hand-formed aluminum shrouds, wiring harnesses, and radiator caps for a complete install. Choose the style and size needed to equip your ride with the ideal solution for engine temperature control--Griffin Performance Fit combos. * Griffin Performance Fit radiator combos may require modifications for installation. * See Griffin Exact Fit radiator combos for installation with no modifications.
( 237 )
$935.00
On Sale
High performance Quick Fuel Black Diamond Q-Series 2-barrel carburetors have been engineered for circle track applications. They feature a high-flow aluminum main body with centered venturi for improved fuel distribution and efficiency. An anti-siphon check valve in the main body helps to reduce pump pullover, and the straight leg boosters enable higher airflow. Q-Series carbs have changeable emulsion bleeds and power valve channel restrictions for better tuning capabilities, as well as adjustable idle mixture screws, power valve blowout protection, and built-in dual sight glass windows for easy float adjustment. The unique PTFE coating provides a highly durable black satin finish; it's impact- and scratch-resistant, and impervious to underhood chemicals. This PTFE coating also offers a 6 percent reduction in fuel temperature, further enhancing your vehicle's performance.
Not Yet Reviewed
$949.95
$853.95
On Sale
MSD Pro-Billet Ready-to-Run distributors are the perfect upgrade for weak OE electronic distributors, outdated points distributors, and large HEIs or DuraSparks. All that's required is to install the distributor in the engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's idle, improve starting, and perform at a much higher rpm. The housing is machined from billet 6061-T6 aluminum, using state-of-the-art CNC mills and lathes for a unit with no porosity or weak areas. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing, while an extra-long sintered bushing guides the shaft at the base of the housing. This shaft also receives a QPQ coating for low friction wear and resistance against corrosion from humidity and ozone buildup. The distributors feature MSD's adjustable mechanical advance, which allows you to custom-tailor an ignition curve to match your engine's needs. Most models are also available with a vacuum advance canister to help improve economy. Order the model recommended for your vehicle and engine application.
( 329 )
$849.95
$763.95
You don't need a king's ransom to rule the track, thanks to ICON premium forged piston and ring kits. They deliver high-performance racing pistons crafted from high-strength, primary aluminum alloys and matching performance piston rings. The pistons feature fully machined heads and valve ports, advanced accumulator and mini groove technology, drilled pin holes, triple-wound spiral lock rings, and their proprietary diamond-finished skirts. ICON premium forged pistons can handle the pressure and abuse from the horsepower numbers that your engine produces. If you're ready to give up your kingdom to build more horsepower with a great set of pistons--think again! The ICON premium forged pistons and ring kit best suited for your application will help you reign victorious without spending a lot of cash.
( 18 )
$755.99
—
$1,059.99
Yukon Gear & Axle Grizzly lockers offer fierce power! These robust lockers are the ultimate mechanical locking differentials, replacing your entire carrier assembly. Yukon Grizzly lockers feature forged cases with 8620 internals and a patent-pending internal locking mechanism for maximum strength. Assembled in the USA, these lockers will provide 100 percent power to both your tires, while still allowing for disengagement while negotiating turns. Whether your application is for the street, off-road, or drag racing, Yukon Gear & Axle Grizzly lockers will have your rig roaring with performance.
( 22 )
$1,012.99
—
$1,065.99
RideTech StrongArm tubular control arms are designed to stiffen up your vehicle's chassis, while providing a smoother ride. They feature a tubular design that offers maximum strength—and are available for a variety of front and rear positions. The control arms include bushings and factory-installed ball joints (front), making installation easier. Get optimum suspension geometry with a set of RideTech StrongArm tubular control arms; order the kit recommended for your vehicle.
( 17 )
$895.00
Jesel Extreme Series distributor drive kits were introduced in 2011, and are designed to handle the high cylinder pressures experienced in Pro Stock and Pro-Mod type engines. They feature MSD 5 in. Pro-Caps to ensure accurate spark delivery, as well as to reduce spark scatter frequently experienced in high cylinder pressure applications. Jesel belt-driven distributor systems are direct bolt-on accessories to their camshaft belt drives, eliminating timing inaccuracies due to camshaft deflection and cam walk. By driving the distributor drive directly off the camshaft pulley, ignition timing stays constant and will not deviate from the initial settings. Plus, Jesel Extreme distributor drives provide the ability to set the engine back further in the chassis without worrying about firewall or windshield interference.
( 2 )
$890.00
ICON premium forged pistons are made from high-strength, heat-treated aluminum alloy. They feature a diamond-machined skirt, head, mini-grooves, pin bore, gas accumulator, ring grooves, and pressure-drilled pin hole oiling. The pistons have a V-rib design for light weight, strength, and maximum piston cooling. Compare weight, performance, design, and cost—and you will win with ICON!
( 43 )
$814.99
Griffin exact fit radiators feature an OEM-style stamped tank and are made of high-quality lightweight aluminum. They provide seamless installation with no modifications required—and will deliver optimum cooling performance for your auto, truck, musclecar, or hot rod. The radiators are available in downflow and crossflow styles, with many size options for specific vehicles.
( 177 )
$941.00
For the enthusiast who chooses a solid lifter cam, COMP Cams offers the highest quality solid lifters available today. These lifters are manufactured using the tightest tolerances in the industry, ensuring optimum performance. The crown of the lifters is ground to a precise radius for proper break-in and to guarantee long life. The oil-metering band is milled to the correct depth to prevent too much oil from being delivered to the top of the motor, and to prevent horsepower loss. Order the size and quantity needed for your engine application.
( 28 )
$948.95
Manufacturer Rebate
Powertrax Grip Pro traction systems are the latest design in differential technology. They combine the smooth operation of a limited-slip differential, with the strength of a fully machined, forged steel case. Using 3x2 spiral gear engineering, the Powertrax Grip Pro delivers progressive and variable traction. Based on throttle input, you are in control of how much traction is applied. These differential systems are great for use where finesse is just as important as brutal traction. On the road or track, in the rain or snow, Grip Pro is a winner! The systems come fully assembled and there are no friction plates—so you can use any gear oil you like, including full synthetic and racing lube.
( 21 )
$781.99
JE Pistons 460 flat top pistons are compatible with OEM and aftermarket standard valve location heads. They will accommodate oversized valves and long-duration, wide lobe separation cams. The precision CNC-machined ring grooves accept 1/16, 1/16, 3/16 rings and compression height is figured for 10.300 block height. SVO C, E, and Boss aluminum heads will require custom piston applications.
Not Yet Reviewed
$949.99
JE Pistons 460 inverted dome top pistons are compatible with turbocharged, nitrous, and forced induction systems. The valve reliefs are designed to accommodate oversized valves and long-duration, wide lobe separation cams. Their precision CNC-machined ring grooves accept 1/16, 1/16, 3/16 rings and compression height is figured for a 10.300 in. deck block.
Not Yet Reviewed
$1,024.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
