Availability
Showing In Stock Items. Show All 18 Items.
Eliminate dry starts with one of these Melling prelube engine oilers, a must-have when building or maintaining an engine. These prelube engine oiler tanks hold fresh oil to prime your whole system, eliminating premature wear due to dry starts. They're compatible with virtually any make/model application. Trust Melling prelube engine oiler tank kits to help your engine start its life right.
( 6 )
$241.99
SuspensionMAXX Super T torsion bar unloading tools are must-haves for anyone modifying or servicing light truck suspensions. These heavy-duty tools feature super-strong steel construction, a knurled placement tip for improved grip, a counter hex for improved effectiveness, and coarse threads to get the job done quickly.
( 12 )
$169.95
Test your cooling system's pressure with these accurate testers from MotoRad. These testers will test today's higher pressure cooling systems and pressure caps up to 30 lbs. The gauges test pressure ranges of 17 to 19 lbs., 20 lbs., and 28 to 30 lbs., with a color-coded dial that makes it simple to accurately test higher pressure caps and systems. A pressure release bar releases pressure buildup before removing the head from the neck. These MotoRad cooling system pressure testers come in a plastic carrying case with an easy-to-use instruction manual.
( 2 )
$106.99
Innova OBD1 kits offer compatibility with all their OBD2 code readers featuring removable cables in both the CarScan and FixAssist lines of tools. With these sets, you can perform tests like KOEO, KOER, timing check, cylinder balance, output state, wiggle, and more. As a leading supplier of test equipment and diagnostic reporting for the automotive aftermarket, Innova Electronic Corporation offers high-quality products, innovative diagnostics, and value to their customers with products like their OBD1 kits. OBD1 adapters included with the kit: * General Motors (1982-93 and some 1994-95 models) * Ford, Lincoln, Mercury (1983-95 models with EEC-IV systems) * Toyota, Lexus (1991-95) * Chrysler, Dodge, Plymouth (1984-95) * Jeep (1993-95) * Honda
( 4 )
$103.99
RideTech AirPod covers keep your system under cover and your trunk looking good. These heavy-duty covers provide a professional, aesthetic look for your 3 or 5-gallon RideTech AirPod compressor. The covers are easy to install for a clean, sleek appearance.
( 1 )
$165.00
Camshaft position is critical in today's engines. These OTC camshaft alignment tools prevent the camshaft from moving and are necessary for performing valvetrain service. They come available for multiple applications.
( 14 )
$193.99
Yukon Gear & Axle setup bearings easily slip on and off the pinion journal to allow for pinion depth adjustment. These setup bearings ensure you have the proper tolerances needed and are a great addition to your toolbox!
( 3 )
$164.99
Yukon Gear & Axle differential carrier shim installation drivers are amazingly self-explanatory. They help you install carrier shims on the differential carrier. The tools include five different size shims, so they can be used on a variety of Ford, GM, Mopar, or AMC differential carriers.
( 4 )
$200.99
Yukon Gear & Axle differential bearing preload tools, spanner wrench, and side adjusters are all constructed from high-quality materials and have simplistic designs to make your life easier when you're working on multiple different vehicle applications. Whether you're looking for bearings, differentials, or side adjustment, Yukon Gear and Axle has you covered.
( 9 )
$172.89
—
$172.99
These OTC rear main seal installers ensure that the rear main seal is set to the correct depth of the crankshaft. The OTC installers fit over the seal and attach to the engine crankshaft with the two bolts included. By alternatively tightening the bolts, the seal is pulled into place quickly, easily, and with no damage to the rear main seal.
( 3 )
$154.99
There are many steps in setting up a new ring and pinion, and none should be taken lightly. When it's time to set up the pinion preload, you'll appreciate the assistance of Yukon Gear & Axle pinion yoke holders. These specialty tools firmly hold the yokes in place and are compatible with almost all differentials. Yukon Gear & Axle pinion yoke holders make setting pinion preload settings a much easier process.
( 2 )
$174.99
These SPC Performance ball joint presses were specifically designed to remove the original equipment ball joints on smaller cars when installing SPC Performance sliding ball joints. Now you can remove the ball joint from the front upper control arm without removing the control arm from the vehicle. These SPC Performance ball joint presses are packaged in a convenient blow-molded plastic case for storage and easy identification.
Not Yet Reviewed
$157.99
Camshaft position is critical in today's engines. OTC offers dozens of camshaft alignment tools designed to help prevent the camshaft from moving. Many of these tools are necessary for performing valvetrain service. Order the model recommended for your engine application.
( 19 )
$142.99
Clearance
Yukon Gear & Axle differential carrier bearings are low-cost replacements for Positraction or locker upgrades. They bearings are made of steel and most include races and shims. Order the kit recommended for your axle application.
( 18 )
$194.99
$103.50
CTA offers a wide range of professional automotive specialty tools including Ford camshaft alignment tools that are a must when servicing the camshaft. Accurate camshaft alignment is crucial for proper engine timing, which directly affects engine performance, fuel efficiency, and overall engine health. Incorrect timing can lead to misfires, stalling, and even engine damage. These Ford camshaft alignment holding tools from CTA are engineered to hold the camshafts in the correct position, while the variable cam timing units, timing chains, or camshafts are removed or installed.
Not Yet Reviewed
$115.45
These OTC Ford injector remover and installer kits remove and install fuel injectors without damaging the injector or cylinder head. OTC manufactures these kits to accept a standard 3/8 in. drive.
( 5 )
$160.99
Yukon Gear & Axle Zip Locker pump-up kits can be handy in your off-road adventures. While you're inflating tires or after patching a flat that needs air, these pump-up kits work with your onboard compressor to get the job done. These kits include hose, couplers, connectors, a male run tee, a lock-on chuck, and PTFE tape. After a day on the trail, it's time to pump up the tires and head home. With Yukon pump-up kits, you'll have the airflow to get you on your way quickly.
Not Yet Reviewed
$101.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
