Availability
Showing In Stock Items. Show All 6 Items.
Rhodes Race Cars competition roll cages meet or exceed NHRA and IHRA requirements (when properly installed). Available in 4, 6, 8, and 10-point models, all RRC bars are precision bent for each particular body style and feature notched tube ends (where applicable) for ease of installation. Increase chassis stiffness, and race safe with Rhodes Race Cars competition roll cages. RRC roll bars and cages are available in the following materials: * 1-3/4 in. x .134 in. wall mild steel tubing * 1-3/4 in. x .120 in. wall DOM tubing * 1-3/4 in. x .083 in. wall 4130 chromoly tubing The 4-point kits include main hoop, rear braces, seat crossmember, and four steel mounting plates. The 6-point kits include main hoop, rear braces, side bars, seat crossmember, and six steel mounting plates. The 8-point kits include main hoop, rear braces, side bars, frame supports, seat crossmember and 6 steel mounting plates. The 10-point kits include everything in the 8-point kits, plus a roof hoop, windshield runners, and dash crossmember. Note: Because of differing driver positions and main hoop locations, roof hoop and windshield down bars are not notched!
( 142 )
$849.95
Rhodes Race Cars Lemons and Chumps roll cages are specifically designed for those of you looking to compete in 24 Hour of Lemons and ChumpCar Series races. RRC has taken out all of the guess work and come up with these easy-to-install kits. All the tubing is pre-bent and notched for ease of installation. Rhodes Race Cars Lemons and Chumps roll cages are available in ERW mild steel, DOM, and chromoly. ERW mild steel is accepted by both sanctioning bodies, but DOM is very strongly recommended. Chromoly is generally NOT recommended for this type of racing. Check your sanctioning body's rules before you order! Note: Some minor trimming may be required during installation. All RRC cages are weld-in cages.
( 5 )
$824.95
—
$974.95
Rhodes Race Cars SCCA, NASA, and Drift roll cages are made specifically for hobbyists and for serious racers looking to compete in SCCA, NASA, or Formula D events. All road race cages feature a main hoop diagonal and dual door bars (can be made into dual X-bars). They are weld-in cages and feature notched tube ends (where applicable) for ease of installation. Roll cages are offered in these materials: * 1 5/8 in. O.D. 0.134 in. wall ERW mild steel tubing * 1 5/8 in. O.D. 0.120 in. wall DOM tubing * 1 5/8 in. O.D. 0.083 in. wall 4130 chromoly tubing DOM tubing is very strongly recommended; ERW cages will most likely NOT pass tech inspection for most classes. Chromoly is not recommended by most sanctioning bodies. Due to different requirements for specific classes and weights, you should check with your track or sanctioning body for specific guidelines prior to purchase. It is the installer's responsibility to assure that a cage meets race organization rules as to tubing material and sizes, fit, placement of components, and welding. Note: Because of differing driver sizes and main hoop locations, roof hoop and windshield down bars are not notched. Some minor trimming may be required during installation.
( 2 )
$824.95
—
$974.95
Manufacturer Rebate
MagnaFlow direct-fit catalytic converters are designed for easy bolt-on installation for the professional installer. Welding, cutting, and tube-bending equipment are not required. These cats feature a ribbed body that minimizes expansion and distortion when the converters heat up. The ribs form a channel that protects the cushioning mat from direct exposure to exhaust gases, and they hold the ceramic catalyst in proper alignment. MagnaFlow converters use a monolithic honeycomb catalyst; the ceramic coating is designed for maximum flow and surface area, and the coating method is strictly controlled to maintain exact specifications. Improper coating could result in flow restrictions or an emissions test failure. These converters are designed to exact OE specifications and are available for the most popular vehicle makes and models.
( 424 )
$904.00
HushMats complete vehicle insulation kits serve two important functions: reducing thermal transfer into your interior, and reducing the noise level by up to 15 decibels. Your engine, headers, manifold and exhaust generate tremendous heat that transfers to the metal firewall and floor—forcing your A/C system to work harder to maintain a comfortable environment. HushMat auto heat shield is proven to lower this temperature by over 40 percent. At the same time, when you drive on the highway at 65 mph, most vehicles approach 80 to 90 decibels of noise. That's like a vacuum cleaner or garbage disposal running on your passenger seat. These insulation kits use a specially designed sound deadening material to deliver a more peaceful ride. Each kit is packaged specifically for your vehicle to provide 100 percent insulation coverage—no holes in the material and no puzzle pieces to assemble. Treat your firewall, doors, floor, tunnel, rear wheel wells, trunk floor, and roof with these HushMat barriers. Order the complete insulation kit designed for your specific vehicle. Additional details: * Reduces road noise and vibration, low-frequency noise from 0 to 1,000 Hz * Stay warmer in the winter and cooler in the summer; withstands ambient temps from -30 up to +550 degrees F * Lightweight and super flexible mats; less than 1/8 in. thick and 0.47 lbs. per sq. ft. * Adhesion is guaranteed; no alcohol or acetone wash needed; no tools required * Trims easily with standard razor knife or household scissors * Self-adhesive peel-and-stick; no glue required * Outperforms closest competitive brand by over 40 percent * OEM approved; meets or exceeds auto damping specs GMO 149M – General Motors; WSB-M5G58-A1 – Ford; and MS-CD 629 Type C – Chrysler
( 1 )
$808.68
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
