Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
LAND ROVER Ignitions & Electrical
Showing In Stock Items. Show All 72 Items.
NTK Oxygen Sensors
NTK is the world's leading supplier of OEM oxygen sensors. They're individually tested to ensure the highest level of quality and reliability—designed to continuously detect the composition of exhaust gases. As the output from the sensors changes, the ECU instructs the fuel mixing system to alter the mixture. This ensures that the air/fuel mix is always correct and promotes efficiency. A new NTK oxygen sensor can help lower emissions, improve fuel mileage and engine efficiency, and extend catalyst life. These components meet or exceed OE specs and are equipped with waterproof, factory-fitted connectors to ensure a perfect fit every time. Order the model recommended for your vehicle.
( 85 )
$76.99
Bosch Premium Universal Type Oxygen Sensors
Worn-out sensors can cause engine performance problems and premature catalytic converter damage. Bosch premium universal type oxygen sensors with OE SmartLink produce precise output in proportion to the air/fuel ratio, due to a sophisticated sensing element. These premium sensors also use a patented connector system, which allows them to be added to an existing OE sensor harness. Keeping a properly functioning oxygen sensor in your vehicle saves money on fuel cost and is good for the environment, too!
( 13 )
$63.99
Delphi Ignition Coils
Delphi ignition coils will definitely spark a response! Precise spark timing offers increased fuel economy and faster crank-to-run. These coils provide accurate electrical energy to create a voltage potential at the spark plug—and that provides you with superior engine performance, better control over emissions, and fuel economy. You'll get the OE performance, durability, and electromagnetic capacity level that your vehicle requires with Delphi ignition coils. Order the model designed for your vehicle application.
( 80 )
$50.99
—
$77.99
URO Parts HVAC Blower Motor Resistors
If your European vehicle's blower motor isn't functioning properly--don't panic. More times than not, the blower motor's resistor (also commonly called a blower motor regulator or final stage unit) is the culprit and can easily be replaced. This small component controls the blower motor's speed by varying the power input. URO Parts HVAC blower motor resistors are common replacement items and are pretty easy to replace on most models.
( 1 )
$86.99
Standard Motor Wiring Pigtails
When you need to replace or repair electrical connectors on your vehicle, Standard Motor pigtails are a great choice. Standard offers pigtails for everything from your alternator and manifold air temperature sensor … to headlight switches and window motors. These factory-type replacement assemblies are available for thousands of specific applications. Choose the Standard Motor parts needed for your make/model.
( 4 )
$59.99
—
$67.99
Summit Bucks
Clearance
Denso Oxygen Sensors
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 95 )
$67.99
$59.99
—
$96.99
Arnott Ride Height Sensors
Ride height sensors determine vehicle height. They can wear out and are vulnerable to damage from road debris, accidents, water, and salt intrusion. Arnott aftermarket ride height sensors are designed to level your vehicle by measuring the varying distances between the road and the vehicle's chassis. The ECU is provided with this information and sends a signal to the air suspension compressor to increase or decrease the air in the air struts appropriately. Arnott ride height sensors are manufactured with quality components, lab tested up to 1 million cycles, and offer plug-and-play installation to restore your vehicle's ability to respond to road conditions, ensuring comfort and capability for a premium ride. Available for numerous applications, select the sensor designed for your vehicle.
Not Yet Reviewed
$84.63
—
$93.78
Holstein Parts Camshaft Sensors
The camshaft position sensor monitors the rotating position of the camshaft relative to the crankshaft position. This data is sent to the vehicle's ECU, where it is used to adjust the spark timing and the operation of the fuel injectors. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts camshaft position sensor line has superior coverage for domestic and import applications.
( 3 )
$51.99
—
$86.99
PerTronix Flame-Thrower Ignition Coils
PerTronix Flame-Thrower upgrades your stock coil to something with more wallop! Flame-Thrower coils deliver more than 40,000 V of spark energy to your plugs for fuller, more complete combustion. They're available in a variety of primary resistance ohm versions, with either oil-filled canisters—which keep their low-resistance windings secure and cool for reliable long-term performance—or epoxy-filled canisters for extra vibration protection. Flame-Throwers are available in chrome or black (epoxy, black only). Order the style and options preferred for your application.
( 527 )
$73.20
Holstein Parts ABS Sensors
Holstein Parts ABS sensor line has superior coverage for domestic and import applications. Anti-lock Braking, ABS Systems allows the driver to maintain control of the car in an emergency braking situation. The ABS system relies on sensors to monitor the wheel's speed and communicate with the ABS computer to ensure ideal performance. The data from the ABS sensor then allows the computer to balance the speed of each wheel to prevent the brakes from locking up and avoiding dangerous skidding situations. Holstein Parts focuses on using only the highest quality materials for their products, all parts are manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part.
( 3 )
$50.99
—
$94.99
Dorman Ride Height Sensors
Dorman ride height sensors are designed to replace damaged, faulty, or missing ride height sensors. They give input to your suspension systems, changing the way they react to various road conditions or loads. They're positioned behind the tire to deliver ride control and suspension leveling. Get a smoother ride with these easy-to-install OE parts--avoiding the wear and tear of the most difficult road conditions.
( 2 )
$58.99
—
$89.99
Standard Motor Crankshaft Position Sensors
These Standard Motor Products replacement crankshaft position sensors are designed to send a signal to the ECM to determine engine rpm, crankshaft position, and engine misfire. They consist of a permanent magnet, yoke, and coil. The Standard Motor Products replacement crankshaft position sensors are mounted close to a tooth gear. As each tooth moves by the sensor, AC voltage pulses are inducted into the coil. Each tooth produces a pulse; as the gear rotates faster, there are more pulses produced. The ECM then determines the speed at which the component is revolving, based on the number of pulses. Therefore, the number of pulses in one second is the signal frequency. If you're experiencing crankshaft position sensor failure, try one of these Standard Motor Products replacement crankshaft position sensors.
( 26 )
$72.99
Delphi Oxygen Sensors
Delphi oxygen sensors will help you get your car up and running in no time. The engineers at Delphi designed these oxygen sensors to use OEM connectors and threads for easy installation in your car. Their unique sensor coating resists contamination to create oxygen sensors that are long-lasting and reliable. Whether you are replacing your exhaust and just want a new sensor or are replacing a worn-out unit, these Delphi oxygen sensors are for you.
( 44 )
$76.99
—
$92.99
Standard Motor Ride Height Sensors
Standard Motor Products ride height sensors are direct-fit OE replacements that ensure ease of installation. These sensors are made of high-quality materials to withstand extreme conditions, and they undergo extensive testing to ensure reliability. Order the model recommended for your vehicle application.
Not Yet Reviewed
$90.99
Standard Motor Power Window Switches
Standard Motor Products offers a full line of these replacement switches for your power windows. You can count on Standard Motor Products for the replacement parts that you need.
( 38 )
$79.99
Standard Motor ABS Speed Sensors
Standard Motor ABS speed sensors supply information regarding wheel movement to the ABS computer. They're often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again. Replacement ABS speed sensors are available for hundreds of makes/models. Just match up your vehicle specs to order the correct unit.
( 16 )
$75.99
Dorman Crankshaft Position Sensors
Dorman crankshaft position sensors are direct-fit replacements that are easy to install and offer long, reliable service. They are constructed from high-quality plastic with metal-reinforced mounting points to protect against failure. Dorman sensors accurately measure crankshaft location to detect misfires and control engine timing. They are manufactured to strict engineering quality standards and are available for a wide variety of applications.
( 2 )
$51.95
Dorman Camshaft Position Sensors
Don't take chances with an old, questionable, or malfunctioning camshaft position sensor that can leave you stranded. These Dorman camshaft position sensors read the camshaft position and relay this information to your vehicle's ECM. This information is required for functions such as initiating injection on sequential injection engines, the trigger signal for the magnet valve on pump valve injection systems, and for cylinder-specific knock control. Dorman camshaft position sensors are designed to exceed OEM specifications for accurate, reliable, maintenance-free operation. Trust your vehicle's engine management system needs to Dorman.
( 16 )
$51.99
Beck/Arnley Ignition Coils
Beck/Arnley ignition coils are high-quality replacements, available in styles such as coil pack, E-core, canister, and C-core. These OE-type direct-fit coils will deliver the spark your engine needs to run efficiently. Order the model designed for your vehicle application.
( 9 )
$53.99
—
$57.99
Standard Motor Ignition Coils
Don't take chances with old or questionable ignition coils that can leave you stranded. Standard Motor replacement ignition coils are designed to exceed OEM specifications for accurate, maintenance-free operation. They're offered in a variety of styles, such as coil pack, canister, and E-core; and these direct-fit coils are available to replace a wide range of factory part numbers/applications.
( 83 )
$82.99
Standard Motor Camshaft Position Sensors
Don't take chances with an old, questionable, or malfunctioning camshaft position sensor that can leave you stranded. Camshaft position sensors read the camshaft position and relay this information to your vehicle's ECM. This information is required for functions such as initiating injection on sequential injection engines, the trigger signal for the magnet valve on pump valve injection systems, and for cylinder-specific knock control. Standard Motor Products replacement cam position sensors are designed to exceed OEM specifications for accurate, reliable, maintenance-free operation. Trust your vehicle's engine management system needs to Standard Motor Products.
( 15 )
$65.99
Delphi ABS Wheel Speed Sensors
Delphi ABS wheel speed sensors meet your OE requirements and those of your wallet. Delphi speed sensors provide accurate, clean signal input to your vehicle's ECM. Designed for the maximum signal to noise ratio, these ABS wheel speed sensors are not impacted by temperature changes and provide robust, long-lasting sensor protection. When it's time to replace, choose Delphi ABS wheel speed sensors for reliability and superior drivability.
( 1 )
$98.99
URO Parts Ride Height Sensors
URO Parts offers ride height sensors for a variety of applications, including many Land Rovers. These suspension components are ideal replacements for worn or faulty originals, and will help restore normal shifting operation of the transmission. The sensors are calibrated with OE specification to accurately measure vehicle speed. Guaranteed to fit, the ride height sensors carry a 24-month unlimited mileage warranty. Order the model recommended for your vehicle.
Not Yet Reviewed
$50.99
—
$72.99
Delphi MAP Sensors
Malfunctioning MAP sensors can often cause problems, such as an intermittent check engine light, hesitation when accelerating, elevated emissions, and even poor engine performance. So, if yours is in need of replacement, do it with Delphi MAP sensors. These MAP sensors provide precise measurements of manifold absolute pressure. They are designed to perform in harsh environments, such as extreme temperatures, vibration, thermal and mechanical shock, and chemical contamination. Safeguard your engine with these quality MAP sensor components from Delphi.
( 20 )
$71.99
