Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
384 Results Found For "Jeep"
Showing In Stock Items. Show All 607 Items.
Painless Performance 21-Circuit Direct-Fit Jeep CJ Harnesses
Painless Performance 21-circuit direct-fit Jeep CJ harnesses are fully grounded for use with fiberglass Jeep bodies. Almost every circuit on these 3-section harnesses are pre-terminated at both ends. Painless uses an OEM-style bulkhead connector that attaches to the bulkhead without any special brackets or modifications. The blade-type fuse block wiring is factory terminated and machine crimped. Each wire is custom printed with the circuit identification as well as using factory color codes for easy installation. These harnesses are not equipped for computer controls, nor is it engine specific. Water temperature sender, oil gauge sender, alternator, starter solenoid, tach lead, ballast resistor, and fuel tank sender are not pre-terminated. Includes circuits for: * Air conditioning/heat * Accessory/cigarette lighter * Backup lights * Brake lights * Charging * Dome light * Electric choke * Emergency flashers * Fan relay * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and trailer lights * Turn signals * Under hood light * Wipers and washer pump
( 28 )
$899.99
B&M Jeep Precision Sport Shifters
B&M Racing introduces the Precision SportShifter for 2007-18 Jeep Wrangler JK models equipped with the NSG370 6-speed manual transmission. The unit features a CNC billet aluminum case with an electric blue anodized finish which houses internal components made from super tough 4140 chromoly. The shift throw has been reduced by 35 percent over the factory shifter along with the detent pressure which has been significantly increased creating a noticeably stiffer shift feel. This was done to address problems with the softness of the factory shifter detent springs which easily pop out of gear while off-roading. The shifter uses the factory shift stick and knob.
( 12 )
$767.95
Painless Performance 23-Circuit Direct-Fit Jeep YJ Harnesses
Painless Performance 23-circuit direct-fit Jeep YJ harnesses fit 1987-91 YJ Jeeps. These harnesses feature a factory-style bulkhead connector that mounts the fuse block in the OEM location. Each harness includes all the connectors and terminals needed as well as a detailed manual. Painless harnesses are factory color-coded and labeled for easy installation. Includes circuits for: * Air conditioning/heat * Accessory/cigarette lighter * Backup lights * Brake lights * Charging * Dome and courtesy lights * Electric choke * Electric fuel pump * Emergency flashers * Fan relay * Fuel injection power * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and trailer lights * Third brake light * Turn signals * Wipers and washer pump (front and rear)
( 4 )
$999.99
On Sale
Bestop Sunrider Tops for Hardtop Jeeps
Bestop Sunrider tops for hardtop Jeeps are engineered to be all-weather replacements for the bulky Freedom panels on JK Wranglers with full factory hardtops. They are completely assembled and ready to install. The unique folding design lets you flip the panel back for an open-sky ride, or simply pull it forward and latch the windshield header just like the original panels. Sunrider tops include the folding frame with the fabric pre-installed, plus upper door mounting rails with hardware—no drilling required! Various soft top vinyl looks are available, such as black twill fabric or factory-style black diamond sailcloth fabric.
( 10 )
$999.99
$849.99
TeraFlex Jeep JL Wrangler Falcon SP2 2.1 Shocks
TeraFlex Jeep JL Wrangler Falcon SP2 2.1 shocks will deliver increased stability, improved ride quality, and comfort for daily driven vehicles—as well as race-inspired performance, handling, and stability for off-road rigs. The SP2 shocks' mode-adjust feature fine-tunes compression and rebound for soft and performance settings, which makes these fixed-rate shocks a must-have upgrade for JL or JLU Wrangler owners. Features, specs, and benefits include: * 6061-T6 aluminum alloy shock body resists wear and protects internal components while providing superior heat dissipation * JL/JLU corner-specific shock absorber * Front lower offset eyelet design provides maximum shock body-to-frame clearance during articulation * Rear roost guards prevent shock shaft damage from rocks kicked up by the tires * Quick bolt-on installation * Smooth honed internal shock body surface for long-term performance * Induction hardened chrome plated shaft resists rock damage and corrosion, as well as prevents shaft buckling * Maximum shaft diameter allows for more precise tuning * Hard-anodized billet piston * Shock body provides optimal performance * Race-inspired performance for increased vehicle stability * Improved dynamic roll control and low-speed damping * Dramatic improvement in on-road comfort and off-road performance * Optimized fitment for clearance during full suspension travel and articulation * One-piece PTFE bronze piston and base valve technology * Volume Optimized Damping (VOD) for quicker ramp-up and increased damping volume * Inline OGS (Oil/Gas Separator) prevents cavitation * Red Line full synthetic shock oil with high-viscosity index of 519 for consistent performance across all temperatures and reduced shock fade * Synthetic formula also contains special anti-wear and lubricity agents for excellent thermal stability * 1,000-hour salt spray corrosion resistance test on all hardware * Serviceable and rebuildable (factory serviced) * Designed, engineered, and assembled in-house from domestic and globally sourced components * Patent pending design * Manufacturer 3-year warranty Important Note: Bump stop configuration varies, depending on shock absorber collapsed length, tire size, and fenders (see instructions for proper configuration for your application). May require 2 in. bump stop strike pad extension kit and/or 0.5 in. bump stop strike pad shim kit(s).
Not Yet Reviewed
$879.99
—
$926.99
DV8 Offroad Heat Hood Jeep JK Hoods
DV8 Offroad heat hoods are a great way to add some custom style that's made to survive your off-road adventures! Designed for great looks and superior durability, the DV8 heat hoods for Jeep JK models will definitely turn some heads. They work in conjunction with the inner fenders and come primed and ready to paint.
( 4 )
$799.99
PROMAXX Performance OE-Replacement Jeep Inline Cylinder Heads
PROMAXX Performance OE-replacement Jeep inline cylinder heads offer direct bolt-on power. Developed and designed from factory castings, these iron heads feature hardened valve seats and heavier-than-stock castings to resist cracking and warping. They replace your stock components and restore original performance. Once again, your rig will be readied to take on aggressive off-road adventures. The heads are available complete with valves and springs. Order the model recommended for your engine application.
( 3 )
$937.00
TeraFlex Jeep JT Gladiator Falcon SP2 2.1 Shocks
TeraFlex Jeep JT Gladiator Falcon SP2 2.1 shocks deliver increased stability, improved ride quality, and comfort for daily driven Jeeps in a compact, affordable package. As with all Falcon shocks, they feature volume optimized damping (VOD) for quicker ramp-up and increased damping volume. They're available in a variety of lift sizes (from 0 to 3.5 in.) to provide the ride height you're looking for. Order a set of vehicle-specific Falcon SP2 Series 2.1 monotube shocks for race-inspired performance and increased stability.
Not Yet Reviewed
$926.99
Bestop 2-Piece Soft Jeep Doors
Bestop 2-piece soft Jeep doors provide protection from the elements, while offering the versatility of a lower and upper soft door. They are available in a variety of colors, and are easily adjustable for a weathertight fit.
( 3 )
$799.99
—
$899.99
DV8 Offroad Jeep JK Wide Fender Flares
DV8 Offroad Jeep JK wide fender flares provide superior tire clearance and ability to flex with internal bracing to ensure strength and durability. These wide, flat fenders come in a gloss black color and can be painted to match or left as-is. They line up perfectly with the JK body lines, and installation is extremely simple with precision-cut holes to match the factory fender holes. DV8's fenders also come with their exclusive turn signal mounting bracket, which can be used to mount an aftermarket turn signal light. Ditch the factory plastic fenders which leave your JK vulnerable to expensive body damage, and upgrade to DV8 steel fenders. Key features: * Front and rear flat fenders with thick tubing and rigid steel plating * Four rubber guards to keep the fenders from rubbing on the Jeep's body * Stainless steel mounting hardware * 2nd generation fenders are wider than the 1st to help keep your Jeep street legal * Bracket included for placing a turn signal indicator (sold separately) into the fender well * Mounting instructions
Not Yet Reviewed
$799.99
TeraFlex Jeep JL Wrangler 2.5 in. Coil Spring Base Lift Kits
The ultra-simple TeraFlex JL 2.5 in. coil spring base lift kit comes with the basic parts needed to fit larger tires for increased ground clearance for better off-road capability without compromising on road handling. These kits are tailored for specific Jeep applications, and are available with or without VSS twin-tube shock absorbers.
( 1 )
$951.98
ARB Jeep Wrangler JK Stubby Bars
ARB Jeep Wrangler JK Stubby Bars provide a winch platform and extra clearance for larger diameter tires. Often tires larger than 35 in. rub a traditional-style ARB Deluxe bar. JK Stubby Bars eliminate this issue since the bar is only as wide as the grille. Even though the bars are very compact, they have many features including full SRS air bag compatibility. Each outer section features high-lift jacking points, brackets are provided for driving lights, and on top of the 3 in. main tube is a mount for LED light bars or antennas. Central on each outer section are .79 in. thick 350 grade recovery points that tie directly into the chassis. The kit also features a bracket to relocate the vacuum pump on later model vehicles. The winch platform allows mounting most traditional low-mount winches or narrow-mount pattern competition-type winches. A bracket is provided to locate the control box in the center of the bar. Two front "flip-up" style license plate mounts are provided: one for roller fairleads and one for Hawse-type fairleads. These allow the plate to be located over the fairlead and flipped up out of the way when the winch is in use. ARB Jeep Wrangler JK Stubby Bars Specifications: * Manufactured from 4mm laser-cut and folded steel sheet * .79 in. 350 grade steel recovery points * 3 in. ERW center frame tube * All hardware zinc plated for corrosion resistance * All exterior surfaces are CMT pulse-welded * 5-stage anti-corrosion pretreatment * Available in durable black satin powdercoat or Integrit textured black powdercoat finish * Includes fully illustrated installation instructions * Bar weight: approximately 66 lbs.
Not Yet Reviewed
$845.95
DV8 Offroad Heat Hood Jeep JL Hoods
DV8 Offroad heat hoods are a great way to add some custom style that's made to survive your off-road adventures! Designed for great looks and superior durability, the heat hoods will definitely turn some heads. They're manufactured from stamped steel, offering added strength and reduced heat. This design provides much better airflow with its vented layout—allowing engine heat to readily disperse. This helps to keep the engine and overall compartment temps down, especially when airflow becomes a problem during rock crawling. DV8 heat hoods result in all-around increased performance for Jeep JL models.
Not Yet Reviewed
$899.99
DV8 Offroad Jeep JL/JT OE Plus Front Bumpers
DV8 Offroad offers OE Plus front bumpers for the Jeep Wrangler JL and Gladiator JT to maintain the styling of the factory bumper while providing enhanced off-road utility. The removable wings allow you to configure your bumper for a full or stubby width design. The stubby version provides added clearance when rock crawling or on more technical trails, while the full width configuration offers more protection from off-road hazards. The bumpers feature a recessed winch mount, so you can enhance your Jeep's vehicle recovery capabilities while increasing airflow to the engine. The bumpers are made from heavy-duty steel to provide more protection from rocks, shrubs, and trail obstacles over the factory bumper. The micro-texture black powdercoat gives the bumper a sleek look that accents the exterior styling of your vehicle. For those that want to hit the trail with confidence without sacrificing the overall appearance of their rig, DV8's JT and JL OE Plus front bumper is the perfect upgrade. Key features: * Heavy-duty steel construction * Front bumper features two light mounts compatible with a pair of 3-inch pod lights or DV8's JL and JT 4-inch LED fog lights (lights not included) * Included steel bull bar is removable, so you can mount it for extra protection to the front of your Jeep, or keep it uninstalled to retain your Jeep's factory look * The bumper comes with a removable winch plate cover to give it a seamless look when you're not mounting a winch * This front bumper is compatible with the OEM Jeep tow hooks in equipped vehicles * For additional lighting capabilities, you can run DV8's 13 in. Elite Series LED single-row light bar above the bull bar or their 20 in. Elite Series LED single-row light bar below the bull bar using DV8's Elite Series light bar mount (Elite Series light bars and Elite Series mount sold separately) Important Note: The bull bar and winch may obstruct the front camera in equipped vehicles.
Not Yet Reviewed
$849.99
ARB Jeep Wrangler JL Stubby Bars
ARB Jeep Wrangler JL Stubby bars provide a winch platform and extra clearance for larger diameter tires. Often tires larger than 35 in. rub a traditional-style ARB Deluxe bar. JL Stubby bars eliminate this issue since the bar is only as wide as the grille. Even though the bars are very compact, they have many features—including full SRS air bag compatibility. Each outer section features high-lift jacking points; brackets are provided for driving lights; and on top of the 3 in. main tube is a mount for LED light bars or antennas. Central on each outer section are .79 in. thick 350 grade recovery points that tie directly into the chassis. The kit also features a bracket to relocate the vacuum pump on later model vehicles. The winch platform allows mounting most traditional low-mount winches or narrow-mount pattern competition-type winches. A bracket is provided to locate the control box in the center of the bar. Two front "flip-up" style license plate mounts are included: one for roller fairleads and one for Hawse-type fairleads. These allow the plate to be located over the fairlead and flipped up out of the way when the winch is in use. Additional product details: * Manufactured from 4mm laser-cut and folded steel sheet * .79 in. 350-grade steel recovery points * 3 in. ERW center frame tube * All hardware is zinc plated for corrosion resistance * All exterior surfaces are CMT pulse-welded * 5-stage anti-corrosion pre-treatment * Available in durable black satin powdercoat or Integrit textured black powdercoat finish * Includes fully illustrated installation instructions * Bar weight: approximately 66 lbs.
Not Yet Reviewed
$895.95
Body Armor 4x4 Full-Width Jeep Front Bumpers
The Body Armor full-width Jeep front bumpers offer complete front end protection for your Jeep Wrangler JK, JL and Gladiator JT and sculpted to enhance the styling of your vehicle. Each bumper is built from 3/16 in. stout steel, unlike your weak factory plastic bumper, and finished with a durable 2-stage powdercoat in a light textured black. Designed to accept most winches up to 12,000 lbs.—including the Warn Zeon winches, these bumpers also feature two integrated, fully welded D-ring mounts to provide a secure recovery point to easily mount your winch to get you out of a bind. For the durability and rugged good looks for the adventures your Jeep will take you on, bolt-on one of these full-width Jeep front bumpers by Body Armor 4x4.
Not Yet Reviewed
$823.00
Body Armor 4x4 Orion Series Mid-Width Jeep Front Bumpers
The Body Armor 4x4 Orion Series mid-width Jeep front bumpers are designed to help safeguard your rig's front-end from trail damage and other impacts. The mid-width front bumpers are built from a stout steel that is finished with a durable 2-stage powdercoat in a light textured black finish. They combine unbeatable style with functionality to deliver the perfect combination of extreme strength and durability, while providing a bold, intimidating look to JK/JL and JT Gladiator Jeep Wrangler vehicles. Beef up your Jeeps front-end protection against animal strikes and other impacts with Body Armor 4x4 Orion Series mid-width Jeep front bumpers. Key features: * Heavy-duty steel construction built to withstand the punishment of brutal terrain * Durable two-stage light texture black powdercoated finish for rugged looks and durability * Ultimate blend of extremely tough looks and protection to safeguard your Jeeps front-end * Compact design fits nice and tight while providing needed protection * High clearance design for better approach and departure angles * Fabricated grille guard and skid plate included * Integrated shackle recovery mounts * Allows clearance for larger tires * Fits Warn Zeon winches and most standard winches—12,000 lbs. winch capacity (winch not included) * Has provisions for additional lighting—light fitment: 18 in. single row LED bar and two cube LEDS or OE fog lights (all lights sold separately) * Easy bolt-on installation
Not Yet Reviewed
$849.99
Body Armor 4x4 Orion Series Full-Width Jeep Front Bumpers
The Body Armor 4x4 Orion Series full-width Jeep front bumpers are intended to protect the front end of your vehicle, including the grille, headlights, and body. For increased robustness, the front bumper is constructed from heavy-duty steel with durable two-stage light texture black powdercoat finish for rugged good looks, and has reinforced mounting points. These full-width front bumpers also include integrated D-ring mounts, light mounting points, and a winch attachment for greater off-road utility and adaptability. Beef up your Jeeps front-end protection with a bolt-on Orion Series mid-width Jeep front bumper by Body Armor. Key features include: * High clearance design for better approach and departure angles * Allows clearance for larger tires * Compact design while offering the most protection * Fabricated grille guard and skid plate included with most models * Has provisions for additional lighting—light fitment: 18 in. single row LED bar and two cube LEDS or OE fog lights (all lights sold separately) * Fits Warn Zeon winches and most standard winches—12,000 lbs. winch capacity (winch not included) * Integrated shackle recovery mounts * Will work with 4xe model with minor modifications * Easy bolt-on installation
( 2 )
$899.99
TeraFlex Jeep JT Gladiator 4.5 in. Coil Spring Base Lift Kits
Just the basics. TeraFlex Jeep JT 4.5 in. coil spring base lift kits set your Gladiator up for lifted performance. Containing the basic lift components needed, these kits start you on your way with front and rear coil spring kits, a front track bar axle bracket, front and rear bump stop extensions and shims, and front and rear sway bar link kits with swivel studs, plus all the necessary hardware. TeraFlex Jeep JT 4.5 in. coil spring base lift kits do not include shocks and will require front and/or rear Sport brackets, or adjustable short or long control arms, and/or adjustable front and/or rear track bars to correct suspension geometry.
Not Yet Reviewed
$763.99
TeraFlex Jeep TJ Wrangler 3 in. Lift Kits
TeraFlex Jeep TJ Wrangler 3 in. lift kits provide superior off-road performance and unmatched street ride for your Jeep TJ. They include front and rear coil springs, rear sway bar links, rear track bar bracket, bump stops, and necessary hardware for installation. Shocks are not included, but they are available separately.
Not Yet Reviewed
$786.99
TeraFlex Jeep TJ Wrangler 4 in. Lift Kits
TeraFlex Jeep TJ Wrangler 4 in. lift kits deliver superior off-road performance and unmatched street ride. They include front and rear coil springs, rear sway bar links, bump stops, rear track bar bracket, and necessary hardware for installation. Shocks are not included, but are available separately.
( 1 )
$885.99
Dakota Digital VHX Series Direct-Fit Analog Gauge Systems
Stay ahead of the curve with fresh instrumentation, like the Dakota Digital VHX direct-fit analog gauge systems. Ideal for classic car restorations, this innovative line features dozens of single dials, clusters, and multi-gauge panels, which install into your vintage ride with no modifications needed. We're talking units for various models of Ford, Chevy, Mercury, Oldsmobile, Jeep, Toyota, Buick, Pontiac, and Dodge … with new "replacements" available for cars and trucks as far back as 1932! Depending on the system you select, you could receive data readings for as many as 20 automotive functions; and, bringing the retro dashboard displays into the 21st century are bright LCD message centers, backlit faces, and fully lit needles. These gauge kits are equally impressive behind the scenes, with solid-state sensors, precision stepper motors, and customizable data readouts. Dakota Digital gauges have revolutionized the industry—just think what they'll do for your driving experience!
( 491 )
$945.25
TeraFlex HD Tie Rod and Drag Link Kits
TeraFlex HD tie rod and drag link kits are built for punishment. Extreme conditions that normally would cause your factory steering components to bend and fail are where these kits will survive. They are designed and engineered to be strong and durable to take you through the terrain, over the rocks, and back home. Outfit your rig with TeraFlex HD tie rod and drag link kits. TeraFlex kits feature: * HD tie rod is 1.6 in. O.D. 4140 heat-treated chromoly * Forged tie rod end housing designed * Allows proper clearance for use with factory 17 in. wheels * Tie rod end joint incorporates same features found in TeraFlex ball joints, including 4140 chromoly ball/stud and 1045 carbon steel housing * Adjustable preload tension to ensure proper long-term durability * Includes the clamp or the TeraFlex steering stabilizer relocation kit * The joint is pressed into the rod end housing and secured with a snap ring. When oriented in the tie rod configuration, the joint offers a total of 14 degrees of movement to minimize tie rod roll, but will still allow maximum turning. * 1.25 in. O.D. fully forged drag link eliminates excess movement during hard steering maneuvers * Oversized DOM factory-style adjusting collar and pinch clamp for simple adjustments
( 4 )
$972.99
COMP Cams Retro Fit Hydraulic Roller Lifter Kits
These COMP Cams retrofit hydraulic roller lifter kits contain the remaining parts required to install hydraulic roller lifters in blocks not originally equipped with hydraulic roller camshafts. COMP Cams has put together these timesaving kits to help you smoothly install your new COMP Cams hydraulic roller cam.
Not Yet Reviewed
$918.95
