Availability
Showing In Stock Items. Show All 26 Items.
Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.
( 252 )
$95.99
—
$128.99
Clearance
For high load applications, King SM-Series rod bearings contain the strongest aluminum-based material offered by King. The alloy is strengthened by the addition of manganese and chromium. King SM-Series connecting rod bearings feature a traditional steel-backing, plus an aluminum bonding layer and the aluminum bearing alloy. These replacement sets are available for a variety of vehicle applications.
( 1 )
$42.99
—
$137.99
Today's engines operate under very demanding conditions. When these Sealed Power main bearing sets are used in performance applications, all components are pushed to their limits—and many must be changed to meet these special demands. Federal Mogul, a longtime supplier to both OEM and the aftermarket, has responded to this challenge with its tri-metal, copper-lead, high performance main bearing sets. They're tested in the lab and proven on the track. The bearings are available for various crankshaft undersizes, for direct replacement or performance usage on a wide range of specific applications.
( 98 )
$70.99
—
$100.99
Federal Mogul CP-Series rod bearings feature classic tri-metal construction and are a good choice for either street or moderate competition use. They have rugged 1010 steel backings, covered by Federal Mogul's H-24 copper-lead alloy. On top of this is a nickel barrier, followed by the tri-metal (lead-tin-copper) overplate that gives these bearings their strength and fatigue resistance. The bearings are then entirely covered with a flash coating of tin. Order the set designed for use with your make/model and engine application.
( 117 )
$7.99
—
$9.99
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 68 )
$71.99
—
$132.99
If you're building a serious performance engine, then you'll want to consider Speed-Pro Competition Series main bearings. They were developed in NASCAR and Pro Stock competition, so you know they're tough. The bearings are built on premium 1020AK steel backings and overlaid with Speed-Pro's super-duty H-14 alloy. That layer is then covered with a nickel barrier, followed by a thin lead-tin-copper overplate. However, unlike other performance bearings, there is no flash tin layer on top of that. Speed-Pro's engineers have determined that such a layer can actually move around under high loads—sometimes with undesirable consequences. Depending on the application, these main bearings have oil grooves for enhanced lubrication, while maintaining a maximum bearing surface area. They also feature Speed-Pro's exclusive contoured-flange thrust bearing technology for higher thrust-loading capacity. Competition Series main bearings are available in nearly a hundred configurations for countless vehicle and engine applications.
( 63 )
$80.99
—
$111.99
Clevite camshaft bearings are manufactured to meet or exceed OEM parts when it comes to strength and durability. They will help to give your motor extra life, and their quality construction and superior materials will help to protect your vital engine parts from the harmful effects of friction. With thousands of applications, you're sure to find the bearings you need for your motor.
( 184 )
$41.99
Today's engines operate under very demanding conditions. Sealed Power has responded to this challenge with their babbit high performance cam bearings. They feature high embedability and conformability and a special "sacrificial" design that enables the bearing surface to deform under extreme loads, preventing any wear and damage to the camshaft.
( 118 )
$36.99
Clearance
Crown Automotive connecting rod bearings will provide reliable value and performance in your engine. Because of the force involved between the piston and crankshaft, bearings are susceptible to wear. These OE-fit replacements are made from quality materials and are available individually or in sets for numerous models. Choose Crown connecting rod bearings to assist you in servicing your engine for lasting efficiency.
( 1 )
$11.99
$7.50
—
$47.99
Camshaft bearings have a relatively easy life compared to other bearings, but they too, eventually need to be replaced. Get Crown Automotive camshaft bearings if they're scored, showing copper, out of spec, or you want all-new parts. They're designed and manufactured to OEM specs for excellent fitment, dependability, and correct sizing.
( 1 )
$59.99
King Engine BB-Series cam bearings are recommended for OE rebuild applications. These cam bearings are babbitt on steel, and are precision machined and then micro-finished to offer long-lasting durability. Save yourself a costly rebuild with King Engine BB-Series cam bearings—stock replacements that been proven, time and time again, to get the job done.
( 14 )
$48.99
King SI-Series main bearings are recommended for OE applications. These replacement bearings are designed for aftermarket gasoline or diesel engine rebuilding—and performance engines with factory crankshafts. The bearings have an improved crankshaft finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series main bearings feature improved oil clearance to reduce wear and increase engine life, which in turn reduces operating noise, vibration, and excess oil flow. Order the bearing set designed for fitment on your make and model.
( 82 )
$16.99
—
$156.99
King SI-Series rod bearings are recommended for OE applications. They're designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE crankshafts. These direct replacements have an improved finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series rod bearings also feature improved oil clearance to reduce wear and increase engine life—which, in turn, lessens operating noise, vibration, and excess oil flow. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 94 )
$13.99
—
$24.99
Mopar Replacement connecting rod bearings are direct-fit OEM replacements that will provide the matching fit and function of your originals. Worn bearings can cause poor operation and unwanted noises. For the most dependable, reliable service of your Chrysler, Dodge, or Jeep vehicle, choose genuine Mopar crankshaft main bearings to restore performance.
Not Yet Reviewed
$24.99
King Engine Bearings offers thrust washers for a variety of performance and OE applications to suit your specific engine needs. An engine with subpar components would only lead to costly repairs, loss of revenue, and potential road safety concerns. From repairs to full engine rebuilds, choose only superior-quality parts from a trusted source—King Engine Bearings.
( 1 )
$5.99
For some engines, the softer and more conformable nature of aluminum is preferable to the stiffer characteristics of the steel backings used for many bearings. Clevite AL-Series main bearings offer the features found in OE-type aluminum bearings, combined with the distinct advantages of proven Clevite know-how. That includes things such as carefully chosen eccentricities tailored to the application, and that means solid, reliable performance. Clevite AL-Series main bearings are a great choice for anything from OEM-style rebuilds to mild performance applications. Clevite recommends these main bearings for most engines using a cast crankshaft.
( 10 )
$43.99
—
$79.99
When you need quality crankshaft main bearings, Crown Automotive has direct replacement parts for a wide array of Jeep, Chrysler, Plymouth, and Dodge applications. Your engine bearings do many things—supporting moving parts from being damaged. Improper bearing selection can result in problems ranging from poor oil consumption to engine failure. Ensure that you're getting the proper bearings for your vehicle; choose Crown.
( 1 )
$10.99
—
$82.99
OMIX-ADA rod bearings offer aluminum OE features with reliable performance. Their selection is available in various quantities to fill your many applications. Whether you are rebuilding or restoring an early CJ or a newer Grand Cherokee, OMIX-ADA rod bearings will be a perfect fit.
( 1 )
$10.99
—
$11.99
Crown Automotive crankshaft thrust washers are available for a variety of engines and Mopar applications. Machined from the high-quality steel, these economical direct replacements install in factory locations with no modification. Sold individually or in a set, order the model recommended for your vehicle.
Not Yet Reviewed
$10.99
—
$14.99
King AM-Series rod bearings are recommended for street or marine applications. They have superior embeddability, which provides greater macro-particle and reduces scratching of the crank journals and tearing or weakening of the Babbitt overlays. The direct replacements feature tolerance control up to +/- .0001—and they're lead-free, making them environmentally friendly and user-safe. Order the King AM-Series rod bearings in the application designed for proper fitment with your vehicle.
( 28 )
$16.99
—
$21.99
Are you doing an engine rebuild? OMIX-ADA main bearings offer the right fit and function to do the job right. They will help reduce the friction between your crankshaft and engine. Get the quality direct-fit main bearings to fit your application from OMIX-ADA.
( 2 )
$99.99
—
$163.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
