Availability
Showing In Stock Items. Show All 314 Items.
Borgeson's Street and Performance Series steering boxes are modern quick ratio units specially designed to replace the Saginaw/Delphi 800 Series in 1965 and up GM vehicles and 1968-86 Chevy C10 and K10 trucks. These Street and Performance power steering boxes will bolt directly to the stock location and fit to the original power steering pitman arms. Adapters are included with each steering box to be able to use either O-ring or flare style hose connections. All Borgeson power steering boxes are assembled and quality tested in-house to ensure you get the best possible replacement for your vehicle. Note: Vehicles switching from manual steering will require a power steering pitman arm (not included).
( 240 )
$467.78
Lares new (not remanufactured) power steering pumps are engineered to OE specifications to ensure proper fit, form, and function. They're manufactured from the same high-quality materials as your original components to provide long-lasting performance. Over a hundred models are available, with or without an included reservoir, for vehicle and engine applications from 1960 and up. Order the replacement pump recommended for your ride.
( 144 )
$98.99
—
$170.99
Lares offers steering couplers for thousands of applications from the 1950s and up. These replacements are carefully engineered to OE specifications. All units are shipped complete with lower casting, rubber disc, and mounting bolts—already assembled for easy, trouble-free installation. Order the model recommended for your specific vehicle.
( 82 )
$26.99
Spicer Drivetrain Products offers ball joints for a broad range of applications, from the 1970s and up. These OE-style replacements are made from quality materials, and most include mounting nut and cotter pin for installation. Swap out your worn or damaged original ball joints with a new kit from Spicer.
( 92 )
$39.99
—
$225.99
Fox 2.0 Factory Race Series ATS steering stabilizers offer unrivaled steering control, a striking high-tech appearance, and can be tailored to any driving style and setup! The technologically advanced design cancels unwanted steering forces in both directions, taking the place of two conventional opposing stabilizers. It will also respond to your input with 24 clicks of external adjustment to fine-tune the feel. An integrated reservoir allows for additional fluid capacity and improves cooling during extreme use. Also included is Fox's relocating hardware that moves the steering stabilizer up and out of the way, utilizing a new track bar relocation bolt and tie-rod mounting clamp. Take control of your steering with the customizable Fox Racing Shox 2.0 Factory Race Series ATS steering stabilizer, available for countless applications from 2007 and up. Additional features: * 2.0 in. metal-impacted 6061 T-6 aluminum body resists rust * Hard-anodized for a durable finish * Components are black anodized, CNC-machined 6061 T-6 billet aluminum * Race-developed high-flow piston design * External reservoir design separates shock oil from the high-pressure nitrogen * Shaft is 5/8 in. hard-chrome plated heat-treated alloy steel * Unique tie rod mounting clamp * Quiet nitrile rubber allows for increased suspension articulation * Redundant sealing pack system main seal, wiper seal, scraper seal * JM92 Advanced Suspension Fluid for improved performance at variable temperatures * Direct replacement for stock and aftermarket lift kits
( 2 )
$524.95
American Iron Off-Road ball joint delete Gen 2 for Jeeps (1990-2017) kits will replace both the upper and lower ball joints on your ride. This second-generation system features a lower cup machined with a recessed flat for increased clearance with axle shafts and RCV setups. The double-ended upper stud accounts for variances between the knuckle and inner C castings, and you can dial-in steering firmness by adjusting torque values on the top Nylock upper and lower assemblies. Enjoy better clearance, an easier installation, and decreased parasitic drag with American Iron Off-Road ball joint delete Gen 2 for Jeeps (1990-2017) kits! More product features and specifications include: * Using two double-ended studs, the hardware is installed in the knuckle with the lower Nylocks fully seated into the tapers and slid onto the inner C casting from below * Adjustable float to accommodate bent C castings and other abnormalities
( 1 )
$639.99
Lares new steering gears are manufactured from the same high-quality materials as your original components to provide long-lasting performance. These new steering gear units (not remanufactured) are engineered to OE specifications to ensure proper fit, form, and function, and each new unit is then inspected, adjusted accordingly and filled with a high-quality grease, so they arrive to you ready for installation. Simply verify fitment, and order your new Lares steering gear that's designed to fit your application.
( 116 )
$256.99
—
$494.99
Fox Racing Shox 2.0 Performance Series IFP steering stabilizers help take the load off your steering components, and keep your tires tracking straight and true. Oversized off-road tires have a tendency to seek out traction in any direction, while their large knobs and open tread pattern can cause your front end to wander on or off the road. Fox 2.0 Performance Series IFP (internal floating piston) stabilizers use advanced damping technology to tame steering feedback from even the most aggressive tires. Features include: * 2.0 in. metal-impacted 6061 T-6 aluminum body resists rust * Clear anodized finish * IFP monotube reservoir design separates stabilizer oil from high-pressure nitrogen * Components are black anodized, CNC-machined 6061 T-6 billet aluminum * Shaft is 5/8 in. hard chrome plated heat-treated alloy steel * Race-developed high-flow piston design * Valving is application specific to maximize performance * Redundant sealing pack system: main seal, wiper seal, and scraper seal * JM92 advanced suspension fluid for improved performance at variable temperatures * Quiet nitrile rubber bushings allow for increased suspension articulation
( 26 )
$229.95
Instant Rebate
TeraFlex HD tie rod and drag link kits are built for punishment. Extreme conditions that normally would cause your factory steering components to bend and fail are where these kits will survive. They are designed and engineered to be strong and durable to take you through the terrain, over the rocks, and back home. Outfit your rig with TeraFlex HD tie rod and drag link kits. TeraFlex kits feature: * HD tie rod is 1.6 in. O.D. 4140 heat-treated chromoly * Forged tie rod end housing designed * Allows proper clearance for use with factory 17 in. wheels * Tie rod end joint incorporates same features found in TeraFlex ball joints, including 4140 chromoly ball/stud and 1045 carbon steel housing * Adjustable preload tension to ensure proper long-term durability * Includes the clamp or the TeraFlex steering stabilizer relocation kit * The joint is pressed into the rod end housing and secured with a snap ring. When oriented in the tie rod configuration, the joint offers a total of 14 degrees of movement to minimize tie rod roll, but will still allow maximum turning. * 1.25 in. O.D. fully forged drag link eliminates excess movement during hard steering maneuvers * Oversized DOM factory-style adjusting collar and pinch clamp for simple adjustments
( 4 )
$421.19
—
$908.99
PSC's JK Big Bore XD steering gear box replaces the 70mm stock piston with a larger 80mm piston, giving it more turning torque to turn up to 37 in. tall tires without the need of cylinder assist. More material was added to the case in all mounting for a sturdier base. The sector shaft diameter was increased from 35mm to 42mm for a 35 percent increase in strength. PSC JK Big Bore XD kits come with a factory drop pitman arm, nut, and washer to match the newer larger sector shaft. Anyone with a Jeep JK running larger than factory tires will want this bolt-on upgrade on their must have list!
Not Yet Reviewed
$1,449.54
Bilstein B8 5100 Series steering stabilizers feature a monotube design for cooler, more efficient operation and longer life. They have the largest available piston diameter, providing superior handling and performance. Their patented digressive valving instantly reacts to changing surface conditions for maximum comfort and control--on and off the road.
( 267 )
$115.00
Instant Rebate
TeraFlex ball joints can help keep your Jeep's off-road integrity intact! Engineered to perform under heavy stresses with excellent wear, these replacement ball joint kits easily handle the increased load caused by oversized tires and offset wheels. The upper ball joints incorporate hard sintered wear bushings to endure extreme side load demands without failure; while the lower ball joints feature a threaded top cap for adjustable preload—and allow grease servicing without axle shaft removal. TeraFlex ball joints feature carbon steel housing with magnesium phosphate coated assembly, plus chromoly ball/stud with magnesium phosphate anti-corrosion coating. For easy maintenance, the TeraFlex ball joints include grease zerks.
( 7 )
$91.07
—
$286.43
PSC Big Bore XD steering gears are direct replacements for your inadequate steering gear. They feature larger piston diameters, which increase the torque output of the steering gear—allowing your rig to overcome steering issues due to larger tires and/or locking differentials that you've installed. PSC Big Bore XD units are assembled using all new components and featuring their exclusive new gear housing--not reworked core housings, but 100 percent new cast and machined housings. PSC also offers cylinder-assist versions for vehicles that have 38 in. and bigger tires and larger drivelines. Order the steering gears designed for fitment with your make and model.
( 25 )
$1,050.00
—
$1,449.54
Borgeson Universal Saginaw 525 manual steering boxes are recommended for manual box applications on all street rods, especially those over 2,500 lbs. They can easily be adapted to the majority of street rod models. The steering boxes feature a 3/4 in. input for a simple steering shaft connection and are manufactured from OEM-quality cast iron.
( 23 )
$317.52
—
$362.17
Instant Rebate
TeraFlex Jeep JL/JT Dana 30/44 heavy-duty ball joints are designed to fit all JL Wrangler/Unlimited and JT Gladiator models with Dana 30 or Dana 44 front axles. These heavy-duty ball joints are engineered to handle the increased load caused by oversized tires and offset wheels. Whether you want to restore your stock chassis to like-new performance or you're looking to improve upon the factory design, TeraFlex has got the right upper and lower ball joints to replace your worn out, damaged, or inferior ball joints.
( 3 )
$278.99
Moog pre-assembled steering linkages are direct-fit steering linkage replacement packages. They feature premium-quality materials that provide strength and durability for long-lasting performance and alignment, reducing tire wear and improving steering. Their premium components come pre-assembled for a quick and easy installation. Simply install the complete linkage and set the alignment; a one-shot solution that eliminates the need to identify, source, and assemble all of the individual parts required.
( 41 )
$440.99
Edelmann Elite power steering filters solves the shortcomings of P/S filters that came before them. They raise the bar on filtering performance to protect the power steering system from contaminates while providing coverage for over 99 percent of vehicles with hydraulic power steering. Incorporating materials such as aircraft-grade anodized aluminum, these universal power steering filters encapsulate Edelmann's Elite philosophy of delivering first-class quality problem-solving products. Connectors and hose clamps are included. Features and benefits: * High capacity stainless steel mesh filter * Larger, more powerful magnet captures additional metal fragments * Dual filtration technology captures metal and non-metallic debris * Built-in safety bypass ensure flow is not inhibited * Aircraft-grade, anodized aluminum body * Serviceable body for a lifetime of use * Easy to clean * Engineered to fight against premature power steering pump and rack failure * Works great in automatic transmission cooler lines, tool * Interchangeable connectors for 3/8 in., 1/2 in., and 5/8 in. hoses
( 4 )
$39.99
Crown Automotive steering kits remain an affordable way to eliminate slack in your old OE linkage. Each kit includes tie rod ends, adjusters, and mounting hardware, as well as a steering stabilizer. Crown steering assemblies are engineered to exactly match the factory design, so they're guaranteed to bolt in place of your original linkage without any hang-ups. Order the kit tailored for fitment on your vehicle.
( 12 )
$185.99
—
$318.99
Rancho high-steer knuckles maintain steering geometry and add strength to the most vulnerable points within the steering envelope when off-road driving. These knuckles add an additional 1.5 in. of clearance within the tight space, helping to protect critical steering components. Their design also helps lift the steering linkage out of range from direct impact with off-road obstacles or impediments. Rancho high-steer knuckles are precisely engineered for left and right hand drive applications with 3 in. and higher lifts. Order the pair recommended for your Jeep and axle model.
Not Yet Reviewed
$450.99
PSC Ram Cylinder Assist replacement cylinder and hose kits include a steering assist cylinder, high-pressure hoses, and steering fluid. You can maintain the performance of your Ram to efficiently handle increased torque loads and deliver improved handling with these kits. Service your system with parts you know will fit and function just like the originals; choose only PSC replacement cylinder and hose kits.
Not Yet Reviewed
$499.51
—
$890.00
PSC power steering pump kits are engineered specifically to power cylinder assist systems, providing the required pressure and flow of power steering fluid. Includes: * Remote reservoir * 4 qts. of SWEPCO 715 Power Steering Fluid * Fluid cooler * SR-VT fluid anti-splash valve * Pulley * Bracketry * Hardware * Fittings, and pre-assembled hoses
Not Yet Reviewed
$1,165.00
—
$1,713.45
Instant Rebate
TeraFlex Falcon Nexus EF 2.2 Fast Adjust steering stabilizers offer a wide range of adjustability with a 3-position fast adjust knob featuring soft, medium, and firm settings. These Jeep-specific steering stabilizers deliver a properly weighted steering feel and consistent bi-directional turning for balanced and controlled side-to-side steering response and an equal return to center dynamics. Built from the ground up with a focus on fitment and function, these Wrangler-specific Falcon Nexus EF (Equal Force) steering stabilizers deliver the best damping characteristics possible.
( 1 )
$404.54
Energy Suspension tie rod end dust boots resist damage from dirt, rocks, sand, water, road salt, and oils, while adding a colorful touch to your steering linkage. Each boot has an important 5-point sealing action that prevents contamination and loss of lubricant—the major cause of rod wear. Your factory originals are likely molded rubber, which will dry rot, crack, and split over time. Energy Suspension bushings are constructed from durable polyurethane in a variety of shapes and sizes to fit countless vehicles. Order them by the pair, the dozen, or in larger quantities!
( 130 )
$5.89
—
$6.06
Aggravation can be defined as trying to maneuver a Jeep with sloppy steering. Address the problem with Crown Automotive steering shaft replacement components. They are direct-fit replacement items for the vehicles specified. Crown should be the choice for OEM-style parts when it's time to tighten up your wandering or loose steering.
( 37 )
$24.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
