Availability
Showing In Stock Items. Show All 188 Items.
Air Lift WirelessAir 2nd generation on-board air compressor EZ mount systems give you everything you need for the fastest, easiest installation possible. EZ Mount systems package the manifold and upgraded, heavy-duty compressor into one convenient, pre-assembled and factory-tested bracket—giving you everything you need to have full control of your air springs in no time at all. Control the air like a boss with your Air Lift WirelessAir 2nd generation EZ mount kit. Features and items: * Inflate and deflate each air spring independently to different pressures * LCD-display wireless controller * One-touch control from inside or outside vehicle is perfect for uneven/top-heavy loads * Two user-defined memory buttons * Compact, dual-path design * Bluetooth-enabled manifold allows for over-the-air software updates * All wiring, hardware, and fittings required for installation
( 8 )
$799.95
On Sale
These Quick Fuel SS-Series carburetors are designed to offer the power of a race carburetor in a streetable package that weighs 5 lbs. less than other carburetors. Manufactured completely from aluminum, they allow you to change the idle feed and offer power valve channel restrictions and idle and high-speed air bleeds for the ultimate in tunability. The solid-state, electric-choke Quick Fuel SS-Series carburetors have billet throttle bodies, billet metering blocks, 4-corner idle systems, secondary jet extensions, and notched secondary floats. The vacuum secondary carburetors feature fuel bowls with a single-sight glass window, while the mechanical secondary carburetors have dual-inlet, dual-sight glass 4500-style fuel bowls and include additional links to tune the secondary opening rate. Quick Fuel has done it--they've created all-aluminum Super Street carburetors that are perfect for your high performance street machine.
( 48 )
$999.95
$853.95
—
$949.95
On Sale
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 22 )
$999.95
$898.95
On Sale
Legendary performance offering more value—Quick Fuel Street-Q carburetors deliver the power without the price. How? By retaining what's most important: the function. Street-Qs feature lightweight cast aluminum metering blocks and cast throttle bodies instead of billet components, so they cost less. But, the Q-Series performance remains: 2-circuit metering, down-leg boosters, changeable idle, high-speed air bleeds, and 4-corner idle. Plus, their universal throttle lever design accommodates Ford A/T kickdowns, 700-R4 bracket mounting holes, and the ability to mount brackets for Chrysler vehicles. Quick Fuel Street-Q carburetors fuel your passion and your budget with race-bred performance at no-frills pricing. Order the model designed for fitment on your vehicle application.
( 26 )
$849.95
—
$899.95
$763.95
—
$808.95
On Sale
Get big-time performance with Quick Fuel Q-Series 4-barrel carburetors with high-flow main bodies, which include either down-leg or annular boosters, screw-in idle and high-speed air bleeds, accelerator pump discharge nozzles, and a blended venturi area. These carburetors have CNC-machined billet metering blocks with 4-stage emulsion to provide more precise fuel metering, improve throttle response, and give a more uniform fuel performance curve. With so many great benefits and their blend of performance and drivability, it's no wonder that these Quick Fuel Q-Series carburetors are the popular choice. So, go ahead--throttle it up with Quick Fuel!
( 46 )
$1,099.95
$988.95
Bestop Sunrider tops for hardtop Jeeps are engineered to be all-weather replacements for the bulky Freedom panels on JK Wranglers with full factory hardtops. They are completely assembled and ready to install. The unique folding design lets you flip the panel back for an open-sky ride, or simply pull it forward and latch the windshield header just like the original panels. Sunrider tops include the folding frame with the fabric pre-installed, plus upper door mounting rails with hardware—no drilling required! Various soft top vinyl looks are available, such as black twill fabric or factory-style black diamond sailcloth fabric.
( 9 )
$799.99
—
$849.99
Yukon Gear & Axle ring and pinion gear and installation kit combos are complete packages that include front, rear, or front and rear ring and pinion sets, along with the most complete master overhaul kits on the market—giving you everything needed to re-gear the front and/or rear differentials in one package. Conceived to handle some of the harshest conditions, these combos utilize the latest design and manufacturing technologies to afford you quiet running gear that's strong and easy to set up. The included Yukon master rebuild kits undergo extensive research to ensure a perfect fit and hassle-free install with the very best components. Order the combo designed to fit your application.
( 13 )
$924.99
—
$938.99
On Sale
Rough Country offers N3 Series suspension lift kits for thousands of trucks from the late 1960s and up—including models from Chevrolet, GMC, Cadillac, Dodge, RAM, Ford, Jeep, Toyota, Nissan, and Mazda. Depending on the application, these kits enable you to raise the front and/or rear of your vehicle anywhere from 1.5 in. to 7.5 in. This is accomplished via a variety of lift component options, such as steering knuckles, torsion bar keys, spacers, strut kits, A-arm brackets, coil springs, leaf springs/blocks, upper control arms, Add-a-Leaf, and shackles. Suspension lift kits provide many benefits, including an aggressive stance, a clean level look, increased ground clearance, and plenty of ride height to accommodate larger tires. Rough Country kits feature front and/or rear N3 nitrogen-charged shocks for incredible ride quality on- and off-road. Most kits are 100 percent bolt-on, requiring no cutting, drilling, or welding. Enhance your rig with all-new stature; order the lift kit recommended for your truck!
( 15 )
$759.95
Summit Bucks
Eaton Detroit Truetrac differentials use a patented design of parallel-axis planetary helix gears to provide a quiet, automatic splitting of torque. They perform like a limited-slip differential under normal driving conditions, automatically transferring torque to the wheel with better traction when ground conditions warrant. These replacement units are available for dozens of axle applications.
( 501 )
$831.99
Borla realizes that every driver has their own preference for the volume and character of their exhaust sound. So, if you're not happy with your factory exhaust's sound and performance, upgrade to Borla Touring exhaust systems. Made from the finest austenitic stainless steel for durability, these Touring (and rear axle-backs) deliver more of everything! They offer increased exhaust velocity for added power and driving excitement, along with that distinctive Borla Sound of Power that's respected by motoring enthusiasts everywhere. More than a hundred configurations are available—find the model designed for your vehicle.
( 282 )
$928.99
—
$1,106.99
On Sale
High performance Quick Fuel Black Diamond Q-Series 2-barrel carburetors have been engineered for circle track applications. They feature a high-flow aluminum main body with centered venturi for improved fuel distribution and efficiency. An anti-siphon check valve in the main body helps to reduce pump pullover, and the straight leg boosters enable higher airflow. Q-Series carbs have changeable emulsion bleeds and power valve channel restrictions for better tuning capabilities, as well as adjustable idle mixture screws, power valve blowout protection, and built-in dual sight glass windows for easy float adjustment. The unique PTFE coating provides a highly durable black satin finish; it's impact- and scratch-resistant, and impervious to underhood chemicals. This PTFE coating also offers a 6 percent reduction in fuel temperature, further enhancing your vehicle's performance.
Not Yet Reviewed
$949.95
$853.95
Larger tires and a weak drag link collar can severely affect your vehicle's performance. Rock Jock offers a great setup—Currectlync steering systems! Each of these heavy-duty tie rod and drag link systems is built to be stronger than stock. Both rods are constructed of forged alloy steel, and include a heavy-duty steering stabilizer bracket and necessary hardware to facilitate an easy bolt-on installation. Enhance your strength with Rock Jock Currectlync steering systems.
( 2 )
$788.00
Armorlite offers complete replacement flooring systems for a wide range of Jeep models. These durable thermoplastic pieces are available in pairs for the front only, or in various sets for the front, second seat, and cargo areas. The flooring is easy to install and clean—and will reduce cabin heat and noise. It's tougher than any floor on the trail for scratch- and mar-resistance. Armorlite details: * The perfect combination of rugged style and trail-proven toughness, Armorlite is built to withstand anything you encounter on- or off-road * Maximum durability: Hands-down, the toughest floor on the trail * Optimum traction, ensuring a firm footing when stepping in and out of the vehicle * Unique styling: Designed to add a completely new element of style and performance, Armorlite enhances the rugged look of your vehicle * Factory fit: With full-floor coverage, Armorlite is engineered for a perfect fit * Easy to clean: With a protective layer designed to withstand anything the trail throws at it, Armorlite cleans easily with soap and water * Water drainage: Our proprietary built-in channeling and drainage system provides water with an easy way out * Thermal protection: The only full-coverage flooring system built to keep heat out of the cabin, Armorlite products endure extensive thermal and acoustical testing on the company's dynamometer * NOTE: Armorlite does not provide an absolute watertight fit in the vehicle.
Not Yet Reviewed
$759.71
TeraFlex HD tie rod and drag link kits are built for punishment. Extreme conditions that normally would cause your factory steering components to bend and fail are where these kits will survive. They are designed and engineered to be strong and durable to take you through the terrain, over the rocks, and back home. Outfit your rig with TeraFlex HD tie rod and drag link kits. TeraFlex kits feature: * HD tie rod is 1.6 in. O.D. 4140 heat-treated chromoly * Forged tie rod end housing designed * Allows proper clearance for use with factory 17 in. wheels * Tie rod end joint incorporates same features found in TeraFlex ball joints, including 4140 chromoly ball/stud and 1045 carbon steel housing * Adjustable preload tension to ensure proper long-term durability * Includes the clamp or the TeraFlex steering stabilizer relocation kit * The joint is pressed into the rod end housing and secured with a snap ring. When oriented in the tie rod configuration, the joint offers a total of 14 degrees of movement to minimize tie rod roll, but will still allow maximum turning. * 1.25 in. O.D. fully forged drag link eliminates excess movement during hard steering maneuvers * Oversized DOM factory-style adjusting collar and pinch clamp for simple adjustments
( 4 )
$1,009.99
Bilstein B8 5100 leveling kits are high performance packages that provide more ground clearance, allow for larger tires, and increase wheel travel and articulation on the front axle. They consist of B8 5100 shock absorbers combined with custom matched, longer travel, cold wound front coil springs and all necessary supporting components and hardware. These simple yet effective kits will bolt into the factory locations and allow you to run 35 in. tires with stock fenders. Bilstein B8 5100 leveling kits provide the full benefit of taller tires, while providing a smooth and stable ride both on- and off-road. Select the kit designed for your vehicle.
Not Yet Reviewed
$756.00
Give your vehicle a bold new look that combines enhanced styling with uncompromised strength and durability with Smittybilt's XRC Gen23 front bumpers. The XRC Gen3 front bumpers have been reengineered with more aggressive features and styling for the ultimate solution on the rocks or the trail. The redesigned corners of these stubby style bumpers offer exceptional clearance for improved approach angles in extreme conditions. You'll still find the dependable features you expect from Smittybilt, including D-ring and jack mounts welded inside and out, front skid strips, and a low-positioned winch plate for enhanced airflow. Crafted from 3/16 in. cold-rolled steel and featuring a reinforced overrider bar, the XRC Gen3 front bumpers provide optimal protection and accommodates use of OE fog lights and also includes multi-design light mounts on overrider bar to meet your lighting needs. Lights not included. Product Overview: * Fits 2007+ Jeep Wrangler JK/JL models * Also fits 2020+ Jeep Gladiator JT 2 and 4-door models * Manufactured from 3/16 in. cold rolled steel * UHMW (ultra-high-molecular-weight polyethylene) provides the ultimate protection for rock crawling * Two-stage light texture powder coat * Light mount tabs accommodate LED light bars and single lights (lights sold separately) * OE fog light provision (fog lights not included) * D-ring and jack point mounts welded on inside and outside * Unique design with added styling * Aggressive stubby design with improved high raised corners for better entry and exit angles * Winch ready—up to 12K lbs. (winch not included)
Not Yet Reviewed
$899.99
Mount an offensive to regain optimum acoustics with Borla ATAK cat-back systems. Your modern muscle car will not only be performance-enhanced, but also acoustically tuned to a loud, aggressive exhaust note. ATAK (acoustically tuned applied kinetics) technology produces the highest dB levels, avoiding distortion to retain clarity. Tuned like a graphic equalizer, these cat-back systems are custom-tuned for your specific vehicle, delivering the most desirable sound to your ears. Plus, you retain all of the power-adding capabilities of Borla's multi-core design. The exhausts are handmade by master craftsmen from premium 300-Series austenitic stainless steel and ultra-smooth, mandrel-bent piping.
( 540 )
$923.99
—
$1,098.99
On Sale
The WeatherTech AlloyCovers are a lightweight foldable hard tonneau cover for those looking to maximize security and durability without compromising style and aerodynamics. These low-profile hard truck bed covers feature an easy-to-use tri-fold design, which makes for effortless installation and removal. The AlloyCovers also feature the AutoLatch II latching system that when paired with a locked tailgate provides excellent security. The truck bed covers sit less than half an inch above the truck bed and incorporates a water-shedding design and vinyl coated hinges to route water away from the bed without gutters or drains. Order the model designed for your application.
( 16 )
$1,053.95
$948.56
Rock Jock high steer knuckles for all Jeep JL and JT models are a game changer! Simply installing these knuckles raises your tie rod 2 3/4 in. and your drag link 2 1/2 in.! They're designed for use on factory axles or axles that retain factory inner "C" knuckles. The knuckles are intended for use with Rock Jock's other high steer components—to give you a package that provides all the necessary components to accommodate the higher steering location, adjusts all geometry points, and allows you to easily install a hydraulic assist steering ram (or to reinstall your stabilizer shock). Rock Jock knuckles are manufactured to greater-than-OEM standards in every way. Features include premium iron castings, gloss black finish, and precise machining for a component that installs just like factory. Additionally, engineers provided extra threaded steering stop bolt holes ahead of the axle to allow for a second set of stops to be added, giving you firm steering lock stops on both wheels at all times, easing strain on other components. Kit Includes: * Left side high steer steering knuckle * Right side high steer steering knuckle Fitment Specs.: * For use on any factory JL or JT front differential, or any aftermarket replacement axle that features factory specification inner "C" knuckles * Retains factory unit bearings, axle shafts, ball joints, steering stop bolts and brakes with dust shields * Intended to be used with a minimum of a 17 in. diameter wheel and up to a 6 in. wheel backspacing * A minimum of a 2.2 in. bump stop extension is mandatory to keep components from crashing under full articulation range conditions
Not Yet Reviewed
$899.00
Rock Krawler RRD 2.25 in. Spec Shocks have a fluted aluminum body, offering the advantage of weight reduction without sacrificing strength. The fluting provides the structure required to ensure the aluminum cylinders are as strong, if not stronger than their 2.25 in. steel counterparts. The shock bodies are treated with a military-grade hard anodized coating, so you never have to worry about corrosion. Dual high-quality DU bearings provide the surface for the massive 3/4 in. Nitrotec Steel shaft. And unlike chrome plated shafts, these Nitrotec steel shafts are bare—so you'll never have to worry about pitting or flaking potentially destroying the seals. While a billet aluminum valve circuit with digressive valving controls the dampening, redundant sealing technology keeps the shock oil where it belongs. The lubricant is formulated for fade-free dampening and smooth rebounds; its high viscosity index and shear stability controls shock fade. This, with a custom PTFE valve circuit wear band, greatly reduces shock body wear. All these features combine to make the RRD 2.25 in. shock a fraction of the weight of steel counterparts—cooling twice as fast for fade-resistant performance. Order the Rock Krawler RRD 2.25 in. Spec Shock package to equip your entire Jeep.
Not Yet Reviewed
$1,045.00
For those who want a bolt-in, no modification required, heavy-duty steering system for many Jeep Wranglers and Gladiators (2007 and up), Steer Smarts has the solution for you. This one-click kit includes a Yeti XD tie rod, bottom mount drag link, and 1 5/8 in. aluminum damper bracket. You can round out the front-end trifecta by adding Steer Smarts' Yeti XD front adjustable track bar for the ultimate front-end setup. * Note: Not compatible with stock JK or Super Duty Dana 60 axles. Only with upgraded aftermarket DANA Ultimate Dana 60 axle Product features: YETI XD TIE ROD + DRAG LINK ASSEMBLIES: * Easy bolt-on installation * Engineered for proper clearance to other chassis components to eliminate interferences BALL JOINTS: * 30mm 1 1/2 ton ball joints are designed specifically for the JK with a UD60 (68.5 in. wide) * Cold-headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme-duty usage * Induction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability * Steel on steel bearings provide exceptional ball joint wear resistance and robustness * High-quality seals ensure ball joints' life is long-lived. These superior seals have been rigorously tested to minimize leakage between grease service intervals which significantly improves ball joint reliability over the competition * Fully greaseable TIE ROD + DRAG LINK ENDS: * Powdercoat over E-coat for a long-lasting appearance under harsh conditions * External threads are E-coated for durability and long-term serviceability * Forged from medium carbon high hardenability steel and heat-treated for even greater buckling, impact, and fatigue strength * Large 1 1/4 in. rolled threads at tie rod adjuster and drag link ends provide significantly increased strength over the original equipment threads * Unique "Reverse Pin" technology on the passenger-side ends prevents linkage from unwanted flopping/rocking. This technology is built into the socket, unlike the weak external supports on some competitor linkages ADJUSTER TUBES: * Tie rod and drag link adjusters are manufactured from large diameter 1/4 in. thick wall high-strength 4130 chromoly steel tubing for maximum buckling strength * Adjuster clamps assure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts * Designed with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle * Internal threads and tube are also E-coated for long-term serviceability * Yeti XD tie rod and drag link fit all left-hand drive JK Wrangler models 2007-2018 equipped with a Dana UD60 (68.5 in. wide)
Not Yet Reviewed
$1,045.00
Westin WJ2 full width front bumpers have you covered from corner to corner with their heavy-duty 7-gauge steel construction that's available in three styles—choose from a 10-gauge LED light bar mount, bull bar, or just the bumper only. Westin WJ2 full width front bumpers have a durable textured black finish, and the adjustable brackets allow you to mount different light bars. The stylish light bar mount includes extra ribs to protect your light. All styles accommodate winches inside the bumpers to give you maximum airflow to your radiator, as well as including additional corner light mounts, high-lift jack mount points, holes to install winch with bumper on vehicle, and mounting hardware. Select the model designed for your application needs.
( 2 )
$779.99
—
$854.99
Oracle Oculus Switchback Bi-LED projector headlights incorporate turn signal functionality. The Switchback function provides a white halo with over 200 bright white LEDs for a vivid lighting impact and an amber halo with 200 bright amber LEDs for a turn signal. Oculus Bi-LED headlights feature advanced LED projection with 4,800 Lumens of high-quality illumination for enhanced driver visibility in all weather conditions. And the LED light source has lower power demands compared to the factory lamps while providing more light output. Light focus is very important for not only driver safety but others on the road who can potentially have their vision obstructed by glare. Oracle Oculus Switchback Bi-LED projector headlights are complete headlight replacements, offering better light focus than a simple bulb upgrade. They feature a very sharp cut-off line and they focus light with precision, specifically to avoid such issues. Proper thermal management tools are also important for LED reliability. Oculus utilizes both active and passive cooling methods to sustain low LED temperatures. Remote mounted heat sinks and an internal cooling fan work in conjunction to ensure proper temperature control and longevity of the LEDs. Features: * Precision LED lighting projector for optimum light distribution and beam angle * Installs using original mounting hardware * Headlight wiring is plug-and-play into the factory connector without additional relays or harnesses * White halo is activated through the factory parking lights * Turn signal wires with the included plug-and-play wiring adapter * Includes tool for easy beam angle adjustability for proper light focus on lifted Jeeps
Not Yet Reviewed
$876.00
Bilstein B8 8100 Series bypass shocks are direct-fit, position-sensitive dampers for light trucks and SUVs. These motorsports-inspired shock absorbers utilize a dual tube externally adjustable bypass design. They feature "incremental flow" bypass adjusters, allowing for finite and incremental changes for rebound and compression. Bilstein B8 8100 bypass shocks will maximize your driver experience, offering unparalleled ride comfort and incredible bottom-out control. Many sizes and options are available; order the shocks recommended for your vehicle. Additional details: * Shocks utilize a bottom hose, remote reservoir exit port, delivering increased compression control during the full cycle * Remote reservoir is supplied with a bolt-on aluminum anodized chassis mount for easy fitment * Zinc plated finish * Non-coilover 60mm body diameter
Not Yet Reviewed
$784.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
