Availability
Melling high-volume oil pumps give you an additional 20 to 25 percent of much-needed oil volume for your performance application. For those of you who need added pressure, many pumps are supplied with a high-pressure spring (where noted). The pumps are built using a proprietary casting process, which yields maximum performance and reliability. Every Melling oil pump is completely pressure-tested, including idle and bypass pressure, before it leaves the factory. Dozens of models are available for fitment; order the pump and options needed for your vehicle.
( 339 )
$152.99
—
$212.99
COMP Cams HRT Max Power Master camshaft kits take the guesswork out of choosing the right valvetrain-upgrade package to achieve your desired performance with your Dodge Gen III Hemi. These Max Power kits feature the "low shock technology" of COMP's HRT camshafts with lobe profiles designed to maximize horsepower and improve stability at higher rpms. The profiles are also easier on valve springs, enhancing durability and reducing load loss. By dyno testing with many combinations of valvetrain components, COMP Cams' engineers have created these more complete, perfectly matched engine camshaft packages for your Hemi application in three different stages of performance. COMP HRT Max Power MK-kits include: * HRT Cam * Lifters * Pushrods * Conical or Beehive springs * Steel retainers * Locks * Spring seats * Valve seals * Phase limiter (VVT Hemi kits only)
( 4 )
$1,839.95
Your valves will open more quickly from a fully closed to a fully opened position with a roller setup, compared with conventional flat lifters. With Sealed Power Hydraulic roller lifters you will notice higher performance, quieter engine operation, and more horsepower. They also provide proper vacuum and idling capabilities.
( 26 )
$121.99
—
$194.99
Fel-Pro headbolt kits contain a complete set of the highest quality headbolts and hardened washers available. They're cold-formed to ensure molecular integrity, then heat-treated prior to thread rolling and machining. Reduced-diameter bolt heads eliminate the need for valvetrain removal and facilitate cylinder head re-torquing. The bolts are available in a variety of head styles for fitment on specific vehicle and cylinder head applications.
( 215 )
$29.99
—
$51.99
Mopar Replacement rocker arms offer an original equipment fit. That means their fitment and install will be hassle-free. These genuine OE Mopar parts will help to keep your vehicle's engine running its best. Select the Mopar Replacement rocker arms designed for fitment for your vehicle application.
( 17 )
$161.99
COMP Cams HRT Stage 1 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles designed to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. COMP Cams HRT camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250 percent improvement in the effective load bearing area, allowing for much higher loads. All HRT Stage 1 camshafts do not require upgraded valve springs.
( 1 )
$605.95
—
$1,236.95
Replace your worn or ticking lifters with premium-quality valve lifters from Crown Automotive. They're available in a variety of hydraulic styles—such as flat tappet, roller, and lash adjuster. Order the model designed for fitment on your specific vehicle.
( 1 )
$21.99
—
$146.99
Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.
( 307 )
$99.99
—
$599.99
An engine running on dirty oil won't last. Keep it clean with an ACDelco Gold oil filter. They help trap particles up to 25 microns, or one-third the width of a human hair, thereby improving the quality, performance, and lifespan of your engine. ACDelco makes oil filters to fit 99 percent of all cars, light trucks, and sport utility vehicles on the road today. Order the model designed for your engine application. Additional features include: * Excellent filter capacity, enhanced efficiency, consistent flow management, and high durability * Tight seals to prevent unfiltered oil from entering your engine * Consistent, dependable oil filtration throughout the filters
( 166 )
$2.50
—
$7.99
Now you can easily move your vehicle's oil filter to a more convenient location for quicker and easier filter changes with one of these Derale Performance engine oil filter relocation kits. They work great for engine swaps, too! The kits are available for hundreds of vehicles; order the model recommended for your application.
( 37 )
$80.28
—
$112.40
ATI Super Damper harmonic balancer shells are specifically designed for high-rpm engines. Their proven elastomer is engineered and tuned to eliminate damaging crankshaft harmonics that cause parasitic horsepower loss. These damper shells are built to all-but-eliminate worn parts and timing problems. These are the shells only and must be used with an ATI hub, which is sold separately. Order the model recommended for your vehicle application.
( 17 )
$318.78
—
$342.80
Ford Performance Parts high performance oil filters are designed and built for high performance use. They're available for a wide variety of applications. Features include: * Synthetic polymer/cellulose-fiber blend media * Heavy-gauge bases and canisters * Higher burst strength and fatigue resistance * High-quality silicone anti-drain back valves * Non-stick sealing gaskets * Long life with all motor oils * Up to 50 percent more filtering capacity than standard filters * Improved filtering efficiency
( 53 )
$22.99
—
$223.99
Trans-Dapt Performance remote oil filter relocation kits allow you to move your oil filter to a more accessible location, making filter changes quick and easy. They're available in single or dual filter kits. Dual filter kits double the filtration of your oil system to keep oil cleaner and add an extra quart of oil capacity.
( 78 )
$101.99
—
$151.99
Melling timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. The crank gears are machined from stress-proof steel. Most Melling timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set the cam timing at 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. The chains are available in several styles, such as single or double roller, single non-roller, and link belt. Melling timing chain sets are not for use above 6,500 rpm. Order the model designed for your vehicle application.
( 132 )
$84.99
—
$671.99
Melling replacement hydraulic lifters are perfect for when you're ready to freshen up your engine. Melling has designed these lifters to be within factory tolerances for the perfect fit. They are affordable and available as flat or roller lifters.
( 37 )
$13.99
—
$999.99
Lokar's flexible and machined engine dipsticks are designed to coordinate with their flexible transmission dipsticks. The slim design allows for an easy installation inside of your headers to work with OEM and Sanderson cast exhaust manifolds. They have clearance for block-hugger headers or can be applied straight into the engine block (without tube), depending on your application. All engine dipsticks feature an E-Z read aluminum or steel stick for an accurate measurement of engine oil.
( 347 )
$102.95
—
$157.95
Motorcraft oil filters are specifically designed for Ford, Lincoln, and Mercury vehicles. Each filter, including the popular Motorcraft FL-1A, uses as many as 12 high-quality components. Choose the style designed for fitment on your vehicle. Construction features include: * Steel cases: "Ironed" for a precise fit, fluted to ease removal, and painted for rust resistance * Pressure relief valve: When it's cold outside, or if the filters become clogged, oil flow through the filters can be reduced. If this happens, the relief valve opens to provide a continuous oil supply. Its design also minimizes the chance of contaminated oil recirculating back * Anti-drainback valve: This feature keeps oil in the filters to prevent "dry starts" after your engine has been turned off. It's made with specially formulated materials that resist the aging effects that an engine's heat can cause * Efficient filter media: Re-engineered media increases Motorcraft filters' dirt-collecting capabilities, allowing them to capture more engine-harming particles than ever before
( 132 )
$8.99
—
$13.99
Mopar Performance valve springs are made from stronger steel than OEM and are intended for general performance use. They're available for many applications in single and dual versions. And make a great choice for your muscle car.
( 4 )
$13.99
Melling offers their engine cylinder deactivation kits for converting active fuel management engines to non-active fuel management versions. These AFM (active fuel management) or MDS (multi-displacement system) delete combos include a variety of components to help complete the changeover. Order the Melling AFM/MDS delete combo best suited for your application. Each kit includes: * MDS delete camshaft (1) * Non-MDS hydraulic roller lifters (16) * Lifter guides for Non-MDS engines (4) Application dependent components include: * AFM/MDS solenoid plugs (4) * Camshaft thrust plate (1) * Variable Valve Tming (VVT) oil control valve (1) Notes: * When installing a delete cam, the active fuel management lifters must be replaced using non-active fuel management lifters. * The valve lifter guides used in non-active fuel management engines differ from those used in active fuel management engines and must be replaced for this application. * The AFM/MDS solenoids must be replaced using non-MDS plugs. * The vehicle engine control module/powertrain control module must be reprogrammed to turn off the active fuel management system in the operating software. * Pushrod length must be checked during installation to verify the correct length.
( 4 )
$1,412.99
Simplify your valvetrain assembly! COMP Cams high performance valve spring kits have everything that you need for a complete valve spring assembly. Springs and retainers are included, along with complete instructions for a worry-free installation.
( 32 )
$475.95
—
$801.95
On Sale
VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.
( 65 )
$3,253.99
$3,053.99
—
$4,303.99
Melling camshaft phasers (aka, sprocket actuators or variable valve timing sprockets) are constructed from high-quality durable steel and shipped with the mounting bolt that attaches the camshaft phase to the camshaft. Sprocket actuators adjust the timing of the motor to ensure that you get the engine power you need, when you need it. The actuator dials the timing back when you don't require the additional power, restoring fuel economy and maintaining engine efficiency. Melling replacement camshaft phasers meet or exceed OE specifications for precise fit and function in their recommended application.
( 3 )
$116.99
To maximize filter performance, Moroso race oil filters have a filtration rating of 27 microns. This results in a maximum pressure drop of only 2.5 psi, which results in more flow, less oil bypass, and maximum filtration performance, which is so important in severe racing conditions. Made with roll-formed threads for a precise, tight fit, and with an anti-drainback valve to keep oil in the filter after engine shutdown, they are perfect for any race application.
( 74 )
$27.99
COMP Cams HRT Stage 2 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles designed to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250 percent improvement in the effective load bearing area, allowing for much higher loads.
( 1 )
$1,236.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
