Availability
Showing In Stock Items. Show All 12 Items.
The Jeep NP231 is one of the most popular transfer cases, but it creates an extremely short rear driveshaft. These fixed yoke kits from Advance Adapters add 3 to 4 in. to the rear driveline length on a YJ, and up to 6 in. on a TJ. This results in a better driveshaft angle, eliminated driveline vibrations, and a transfer case that's ideal for trail use.
( 62 )
$258.76
On Sale
B&M heavy-duty transfer case shift cable conversion kits replace the failure-prone Z-linkage with zinc-plated steel ends and a bigger (.425 in.) cable to provide solid, long-lasting transfer case gear selection. The 48 in. long cable is an excellent option for lifted builds and the powdercoated brackets will provide years of trouble-free shifts. The cable is compatible with the factory shifter but complements any aftermarket shifter designed to use a factory cable. Features: * Replaces the stock Jeep TJ cable and plastic ends for reliable, positive shifts * Heavy-duty .425-inch cable and 6061 aluminum ends provide a trouble-free, performance upgrade * Perfect solution for Jeeps with suspension and or body lifts * Compatible with factory shift lever for budget friendly replacement * Heavy-duty powdercoated brackets provide excellent resistance to the elements
( 13 )
$175.95
$158.35
From the time your vehicle starts moving until it stops, the parts in the transfer case are in action and under stress. When time, use, and stresses overcome these parts, replace them with Crown Automotive transfer case components. These components are OE-quality and designed to directly replace the originals. Transfer cases are constantly on the go, and when put into 4WD, they are downright abused. Rebuild or refresh your vehicle's case as needed with Crown Automotive transfer case components.
( 32 )
$4.99
—
$300.99
Crown Automotive transfer case shift linkage repair kits are available to stop the thumping or creaking noise which you may have heard coming from the transmission tunnel area on acceleration, or while driving over bumpy roads. The bushings and boots can wear out, or the rubber gasket tears on the end. This allows the torque shaft to travel back and forth too much, causing one of the links to tap on the bracket on the tub. These kits come complete to solve that annoying rattle.
( 3 )
$16.99
Instant Rebate
TeraFlex 2WD low-range kits let you gear down to power up. The 2Low kits are great little mods that allow low-range 2WD--imagine being able to steer in low range! You will have all of the benefits of true low-range gearing, while allowing the front to turn freely. They eliminate drivetrain bind and most of your 3-point turns. These kits are completely internal and do not require any external modifications. Make good use of your engine power with TeraFlex 2WD low range kits.
( 3 )
$104.39
Advance Adapters NP231 fixed yoke kits feature a new 1 3/8 in. - 32 spline rear output shaft, 356-T6 heat-treated aluminum alloy tail housing, bearings, fastening hardware, and detailed instructions. NOTE: At the time of order you have to purchase a yoke separate. Please choose one of the following: * 716295 1310 non-CV yoke * 300472 1350 non-CV yoke * Flange-style yoke are available at an additional cost
( 4 )
$241.19
Crown Automotive disconnect axle replacement components are available to ensure that your vehicle will disengage the front drive axle when you switch from 4WD to RWD or 2WD. If these parts should fail and you are stuck in the wrong drive, restore your front-wheel spin and reduce rolling resistance with quality components--axle shift collars, shift forks, hardware, and gaskets--from Crown for complete axle disconnect service.
( 3 )
$1.99
—
$30.99
Rough Country transfer case drop kits allow for better driveshaft angles reducing driveline vibration. They offer easy bolt-on installation and include hardware. Select the kit designed for your vehicle.
Not Yet Reviewed
$39.95
RT Off-Road offers axle shift fork kits for Dana 30 front axle applications. These complete replacement kits include a steel shift fork, disconnect housing gasket, clips, snap rings, and hardware (disconnect housing bolts) to perform the upgrade. The axle disconnect shift fork is designed to fit into the heart of the vacuum disconnect mechanism, which provides a sturdy replacement for the factory component on select Jeeps and submodels.
( 1 )
$31.99
Whether you are on the road or off-road, leaky seals can and will affect your vehicle's performance. These Motive Gear transfer case seals help you get back to being roadworthy, and keep your transfer case and driveshaft performing their best. Keeping your seals maintained ensures the proper functionality and longevity of your vehicle and its drivetrain.
( 1 )
$2.99
With their input shaft, output shaft, and many gears, it doesn't take a genius to realize that transfer cases need a lot of bearings. Use Crown Automotive transfer case bearings, whether your vehicle's case has a telltale whine, or you're completing a rebuild. They are designed and built to OEM quality for reliable service and a great fit.
Not Yet Reviewed
$43.99
Zumbrota remanufactured transfer cases are put through a proprietary cleaning method, and arrive looking like new. But before they ship, each unit goes through complete inspection, component replacement, and quality control process to assure dependable, reliable shift-ability. Zumbrota rebuilds units from New Process, Borg Warner, and other major manufacturers to fill fitments for foreign and domestic passenger cars, trucks, and SUVs. Benefits of Zumbrota remanufactured transfer cases include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All cases are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent replacement of seals, bearings, viscous couplers (when applicable), and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty
( 7 )
$1,211.99
—
$1,288.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
