Availability
Showing In Stock Items. Show All 57 Items.
Painless Performance 21-circuit direct-fit Jeep CJ harnesses are fully grounded for use with fiberglass Jeep bodies. Almost every circuit on these 3-section harnesses are pre-terminated at both ends. Painless uses an OEM-style bulkhead connector that attaches to the bulkhead without any special brackets or modifications. The blade-type fuse block wiring is factory terminated and machine crimped. Each wire is custom printed with the circuit identification as well as using factory color codes for easy installation. These harnesses are not equipped for computer controls, nor is it engine specific. Water temperature sender, oil gauge sender, alternator, starter solenoid, tach lead, ballast resistor, and fuel tank sender are not pre-terminated. Includes circuits for: * Air conditioning/heat * Accessory/cigarette lighter * Backup lights * Brake lights * Charging * Dome light * Electric choke * Emergency flashers * Fan relay * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and trailer lights * Turn signals * Under hood light * Wipers and washer pump
( 26 )
$899.99
Air Lift WirelessAir 2nd generation on-board air compressor EZ mount systems give you everything you need for the fastest, easiest installation possible. EZ Mount systems package the manifold and upgraded, heavy-duty compressor into one convenient, pre-assembled and factory-tested bracket—giving you everything you need to have full control of your air springs in no time at all. Control the air like a boss with your Air Lift WirelessAir 2nd generation EZ mount kit. Features and items: * Inflate and deflate each air spring independently to different pressures * LCD-display wireless controller * One-touch control from inside or outside vehicle is perfect for uneven/top-heavy loads * Two user-defined memory buttons * Compact, dual-path design * Bluetooth-enabled manifold allows for over-the-air software updates * All wiring, hardware, and fittings required for installation
( 8 )
$799.95
Stay ahead of the curve with fresh instrumentation, like the Dakota Digital VHX direct-fit analog gauge systems. Ideal for classic car restorations, this innovative line features dozens of single dials, clusters, and multi-gauge panels, which install into your vintage ride with no modifications needed. We're talking units for various models of Ford, Chevy, Mercury, Oldsmobile, Jeep, Toyota, Buick, Pontiac, and Dodge … with new "replacements" available for cars and trucks as far back as 1932! Depending on the system you select, you could receive data readings for as many as 20 automotive functions; and, bringing the retro dashboard displays into the 21st century are bright LCD message centers, backlit faces, and fully lit needles. These gauge kits are equally impressive behind the scenes, with solid-state sensors, precision stepper motors, and customizable data readouts. Dakota Digital gauges have revolutionized the industry—just think what they'll do for your driving experience!
( 483 )
$945.25
Eaton Detroit Truetrac differentials use a patented design of parallel-axis planetary helix gears to provide a quiet, automatic splitting of torque. They perform like a limited-slip differential under normal driving conditions, automatically transferring torque to the wheel with better traction when ground conditions warrant. These replacement units are available for dozens of axle applications.
( 492 )
$857.99
Flaming River tilt floor shift steering columns feature large tube diameters and compact shrouds to create a unique custom look. Designed specifically for use with floor shifters and available in a variety of styles, lengths, and shaft sizes, they come complete with a billet dress up kit (tilt, turn signal lever, and hazard knob), and wiring. They are manufactured from high-quality 304 grade stainless steel, will never rust, and are available in a variety of finishes--including a paintable mill finish, black powdercoated, or polished. Mill finish columns are shipped chemically clean and can be painted to match or highlight any interior with only minor preparation. Key column units (see Ignition Key Location above) include an integrated ignition key located at the 3 o'clock position, with no welded-on attachments or extra relays required. Keyed columns are complete with a key assembly, wiring, and ignition switch.
( 107 )
$821.99
—
$1,015.99
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 21 )
$999.95
PSC Big Bore XD steering gears are direct replacements for your inadequate steering gear. They feature larger piston diameters, which increase the torque output of the steering gear—allowing your rig to overcome steering issues due to larger tires and/or locking differentials that you've installed. PSC Big Bore XD units are assembled using all new components and featuring their exclusive new gear housing--not reworked core housings, but 100 percent new cast and machined housings. PSC also offers cylinder-assist versions for vehicles that have 38 in. and bigger tires and larger drivelines. Order the steering gears designed for fitment with your make and model.
( 24 )
$1,050.00
Manufacturer Rebate
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 699 )
$750.10
—
$992.00
Eaton Detroit lockers are designed to maximize traction by delivering 100 percent of the torque and power to both drive wheels. They are engineered to keep both wheels in a constant drive mode and have the ability to automatically allow wheel speed differentiation when required.
( 80 )
$964.99
—
$1,061.99
Better than stock replacements--ididit retrofit steering columns are designed to ensure a perfect fit and a flawless installation in your specific vehicle. The hot rod experts at ididit engineered these columns to fit in the factory location and, in many cases, will put your steering wheel back in its original location. Your column may include (depending on your application) 8-position tilt, self-canceling turn signals, 4-way flashers, a shaft, knobs, levers, and a wiring plug. Fitting your Ford, Chrysler, Chevy, or even Mopar classic with a perfectly planned aftermarket steering column is easier than ever, thanks to ididit retrofit steering columns.
( 211 )
$1,069.00
Upgrade your braking system with SSBC-USA's drum to disc brake conversion kits. You'll enjoy the rhythm of modern stopping power afforded you with their cast iron or aluminum calipers, brake pads, rotors, and all necessary brackets, hardware, and bolts. Order the SSBC-USA drum to disc brake conversion kits designed for fitment on your vehicle—front, rear, or both.
( 30 )
$754.00
—
$898.00
BDS Suspension steps up the performance and capability of your truck or Jeep with their NX2 Nitro shock lift kits. Designed to improve stance, each kit includes the necessary components to set your vehicle up right with clearance for larger tires at an affordable price. Featuring a set of NX2 Nitro Series shocks, BDS lift kits will also include either ProRide coil springs for improved ride quality and more articulation, Glideride leaf springs to provide full lift height and increased capacity, or steel blocks and add-a-leaf for a level stance from front to rear. They may also include other upgrades that add strength and improved handling. Select the BDS NX2 Nitro shock lift kit engineered for your vehicle. NX2 Nitro Series shocks: * Nitrogen-charged * Twin-tube design * 10-stage velocity-sensitive valving * Dual-welded ends for increased strength * 1 3/8 in. high-flow piston * Self-lubricating seals * Silver powdercoat finish
( 1 )
$818.55
—
$950.45
Nitrous engines produce some serious horsepower and require a serious torque converter to handle it. B&M nitrous Holeshot torque converters can handle up to 650 hp and are built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates that allow these converters to stand up to the instant horsepower that nitrous delivers. Converters with higher-than-stock stall speed let your ride accelerate better from a dead stop and allow the vehicle to idle better when a big cam is used. Fully furnace brazed, heavy-duty, needle-bearing thrust packages and new turbine hubs are the key features of these converters, along with the anti-balloon plates. These are serious converters for serious street performance cars.
( 21 )
$899.95
Hays Twister Full Race Torque Converters feature a custom-designed anti-balloon plate to stop any converter ballooning and swelling in racing situations. These torque converters are designed for use with a trans-brake and great for power adders such as nitrous, superchargers, and turbos. They're available with various RPM stall speed offerings to accommodate any mixture of modifications—including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss. Additional product features: * All Full Race Series converters are built, tested, and proven to support up to 1,000 hp * Designed to handle the extreme shock and abuse of trans-brakes, nitrous oxide, superchargers, and turbochargers * State-of-the-art spray welding process is used in select areas. Spray welding provides clean, strong, and consistent fusion while also increasing strength through hardening from higher process temperature * Each converter is hand-built and inspected in every step of assembly to ensure top-of-the-line quality * All Hays torque converters are internally welded, compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency * Heavy-duty Torrington bearings are used for greater strength and durability * Stators are chosen with high-flow vents and channels to promote cooling in heat-producing higher horsepower applications * Increased horsepower and acceleration due to a weight-saving, one-application design. Almost all Hays converters are built for one application to reduce weight, compared to a multi-bolt pattern converter * Full Race Series torque converters are offered in several different stall speeds for popular automatic transmissions.
( 1 )
$899.95
—
$1,049.95
Want to get back the power and gas mileage that you lost from installing those big tires on your Jeep? Motive Gear makes it easy to re-gear your 4x4 with their ring and pinion gear and installation kit combos. These complete kit combos include front and rear ring and pinion sets, plus front and rear bearing kits, giving you everything you need to re-gear the front and rear differentials in one package. The kits come in a wide range of ratios for most Dana applications. Their quality is the result of years of development, outstanding design, and state-of-the-art manufacturing methods to ensure a perfect fit for an easy install.
( 8 )
$1,132.99
Warrior Products half doors are available to complement the rest of your Warrior body armor accessories. Most of these complete replacement door assemblies include the proper paddle handle and mounting hardware for complete closure, as well as weather stripping to help prevent rattling. Warrior half doors are available in their polished and black aluminum diamond plate or smooth black 12-gauge steel.
( 2 )
$806.99
—
$893.99
Here are the toughest, most flexible bumper systems to make your Jeep hardcore. The modular design of these XHD bumper systems from Rugged Ridge provides dozens of looks and styles to build exactly what you need! First, select an XHD short base, available in a winch mount or light base style--both have a narrow overall width with lots of clearance for front tires. These 8-bolt, frame mount designed bumpers are made of heavy-duty steel and attach quickly with two enclosed D-ring mounting brackets, providing a secure mount with two overbuilt pull points. Two protected cutouts for factory fog lights are included, plus side filler plates for a finished look. Then, add some off-road protection with tough .120 wall tubular options and unique D-ring attachments. All of these components are given a textured black powdercoated finish reinforced with an E-coat undercoating, or upgrade to polished 304 stainless steel for the ultimate street-savvy look. Complete your Jeep with matching 2-piece designed rear bumpers and D-rings that can be used with or without tire carrier options. Do you need more front-end protection, clearance, or lights? Go with the systems that give you the options to build your Jeep to your specs--XHD bumper systems from Rugged Ridge.
( 3 )
$779.99
Whether you're setting up ring and pinion gears or doing general differential repair, do it with Yukon Gear & Axle carrier bearing pullers. These tools work with an impact gun to quickly and safely remove your carrier bearings while minimizing the risk of damage. These pullers come with a handy bench top-stand and work on most standard size carrier bearings and pinion bearings on differentials. For all of your drivetrain needs, use Yukon Gear & Axle!
( 5 )
$769.99
RT Off-Road offers complete soft tops for a variety of Jeep applications. They're available different styles and options, such as: with or without soft upper doors, clear or tinted windows, and nearly a half-dozen color choices. The tops are constructed from durable fabric to keep your interior dry and safe from the hot sun, high winds, rain, and even snow. Each kit includes a fabric soft top, frame, and hardware. Order the model preferred for your Jeep.
( 1 )
$759.99
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 80 )
$899.95
—
$999.95
Skyjacker suspension lift kits provide a smooth, comfortable ride, while responding to on or off-road conditions. They'll help you get the right height, clearance, and attitude for your truck or Jeep—while maintaining a "factory" ride quality and improving handling. Standard Flex, Value Flex, Rock Ready, Single Flex, and Double Flex versions are available, depending on your application. The lift kits come with all of the necessary mounting hardware and detailed instructions, and they're available for 2WD or 4WD vehicles.
( 68 )
$775.80
Flaming River Classic Bell floor shift steering columns feature all-new components. They come complete with billet aluminum tilt/turn signal levers and hazard knobs, a GM 4 1/2 in. wiring connector, and a high-amperage ignition switch. These steering columns are manufactured from durable 304 stainless steel, and are available in natural, black powdercoated, and polished finishes.
( 1 )
$994.99
Griffin exact fit radiators feature an OEM-style stamped tank and are made of high-quality lightweight aluminum. They provide seamless installation with no modifications required—and will deliver optimum cooling performance for your auto, truck, musclecar, or hot rod. The radiators are available in downflow and crossflow styles, with many size options for specific vehicles.
( 177 )
$996.00
—
$1,080.00
If you think you are tough on your performance parts, but stainless is not in your budget, then Hedman Elite extreme-duty headers may be the right fit for you project. Their heavier duty construction takes the punishment, and their quality design dishes out the power! They feature thick wall 14-gauge mild steel primary tubes with 3/8 in. flanges to prevent warping for a longer lasting, leak-free seal. Hedman Elite extreme-duty headers are available with the matte silver or Black Maxx ceramic coatings that withstand temperatures up to 1,400 degrees F.
( 373 )
$851.99
—
$880.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
