Availability
Showing In Stock Items. Show All 176 Items.
Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
( 189 )
$329.95
—
$549.95
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 80 )
$399.95
—
$999.95
Lokar's Hi-Tech flexible braided stainless transmission dipsticks match right up with other Lokar accessories. They feature a flexible, heat-resistant PTFE rod with a braided stainless steel cover. The inner rod is stamped with appropriate trans-fluid levels, and the outer housing has a slim design that allows for mounting inside of the headers. These dipsticks are available in both firewall-mount and trans-mount styles, and a funnel adapter is included for assistance with filling. Order the length and other options preferred for your vehicle make and transmission application.
( 337 )
$138.62
—
$163.95
Nitrous engines produce some serious horsepower and require a serious torque converter to handle it. B&M nitrous Holeshot torque converters can handle up to 650 hp and are built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates that allow these converters to stand up to the instant horsepower that nitrous delivers. Converters with higher-than-stock stall speed let your ride accelerate better from a dead stop and allow the vehicle to idle better when a big cam is used. Fully furnace brazed, heavy-duty, needle-bearing thrust packages and new turbine hubs are the key features of these converters, along with the anti-balloon plates. These are serious converters for serious street performance cars.
( 21 )
$599.95
—
$899.95
Lokar's Midnight Series flexible braided stainless transmission dipsticks feature a heat-resistant PTFE rod with a black braided stainless steel cover. The flexible inner rod is stamped with appropriate trans-fluid levels, and the outer housing has a slim design that allows for mounting them inside of the headers. They're available in both firewall-mount and trans-mount styles, and a funnel adapter is included for assistance with filling. Order the length recommended for your transmission application.
( 80 )
$151.95
—
$176.95
Investing in TCI transmission pans ensures the longevity of your transmission. They offer a selection of designs, depths, materials, and finishes to keep your transmission cooler and your undercarriage looking good. Skip the pans of lesser quality doomed to warp and leak; choose the policy of lasting performance from TCI transmission pans. TCI cast aluminum pans feature: * Exterior cooling fins wick away and dissipate heat * Provides additional strength and rigidity to transmission case * Ensures long transmission service-life * Include all required accessories and hardware necessary for installation TCI Max-Cool aluminum pans feature: * Black powdercoated finish * Large fluid capacity reduces internal transmission temperature * Exterior cooling fins wick away and dissipate heat * Aircraft-quality aluminum construction for strength and durability * Magnetic drain plug TCI polished die-cast aluminum pans feature: * Thicker than stock pans * Finned and polished to a high luster * Stock depth to avoid ground clearance issues * Includes drain plug for simpler fluid and filter changes * Includes necessary gaskets, filters, and installation hardware TCI chrome-plated steel pans feature: * Stock depth is easy to install * Includes drain plugs * Thicker than stock for added durability * Chrome prevents rust and adds show quality looks
( 183 )
$176.95
—
$500.95
These TCI transmission Master Racing overhaul kits are designed for racers who maintain their own transmissions. They contain parts that are required when freshening up an existing competition transmission. You'll receive the high performance filter, clutches, steels, seals, gaskets, and bushings normally replaced during a rebuild. In addition, kits for late model GM overdrive transmissions also include a new performance band.
( 58 )
$251.95
Centerforce throwout bearings are made to withstand the wear and tear that clutches go through. They are designed to provide reliable service, race after race.
( 123 )
$57.95
—
$86.95
Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.
( 372 )
$134.99
—
$194.99
McLeod throwout bearings are engineered to provide dependable performance that stands up to the wear and tear placed on clutches. They are available for a variety of applications to suit your needs.
( 63 )
$51.00
Centerforce pressure plate bolt kits feature premium-grade material and a black oxide finish. These bolts fit directly to the flywheel and are available in different sizes to work on a wide variety of applications.
( 10 )
$35.95
These automatic transmission oil pans from Mr. Gasket are stock-depth chrome plated pans. They come complete with a washer and gasket and most have drain plugs.
( 88 )
$87.15
—
$132.95
Pioneer offers transmission fluid dipsticks for a wide range of applications. These replacements are OE-style equipment for precise fit, form, and function.
( 7 )
$93.99
Perfection Clutch offers OE replacement flywheels for applications spanning a half-century. Machined from ductile iron, the flywheels are available in a variety of styles, sizes, and tooth counts. Flywheels serve three purposes: First, to maintain a rotating mass (inertia) to assist the engine rotation, providing a more consistent delivery of torque during running. Second, to provide a ring gear for the starter motor to engage on. And third, to provide one of the driving friction surfaces for the friction disc. Over a hundred models are available; select the replacement recommended for your vehicle.
( 51 )
$143.99
ACT heavy-duty clutch kits offer a clamp load increase of 20 to 50 percent over OEM, significantly increasing torque capacity. The pedal feel with these clutches varies from stock to a moderate increase. Available for street and race applications, many are SFI-certified to ensure safety.
( 87 )
$443.00
—
$476.00
Centerforce II pressure plates provide 60 percent more holding capacity than the pressure plates in factory original-equipment clutch setups. They're recommended for street and strip use on mildly modified vehicles. These pressure plates have also proven themselves to be very capable when used for 4WD vehicles, heavy-duty towing, commercial, and off-road applications.
( 14 )
$293.95
—
$367.95
Are you getting ready for a manual transmission rebuild? Start with one of these comprehensive service kits from Crown Automotive. They supply the bearings, seals, gaskets, rings, and small parts (contents will depend on the application chosen) needed to successfully overhaul your transmission. Preventative maintenance is worth the time spent—and helps to provide reliable long-term performance. Choose the quality of Crown Automotive manual transmission master overhaul kits to get the most from your work.
( 25 )
$22.99
—
$271.99
TCI steel transmission pans are the perfect replacement for performance and appearance beneath your vehicle. These steel reservoirs are thicker than stock for longevity, and some models are beautifully chrome plated to further prevent rust—in addition to including a drain plug to facilitate fluid maintenance. Over time, many transmission pans develop a warped, leaky gasket flange, or become damaged by road debris. Protect your transmission by bolting on one of these economical replacement upgrades from TCI.
( 67 )
$83.95
—
$88.95
Whether your ride has just been mildly modified or transformed into a real fire-breather, you need to consider RAM competition pressure plates. They're available in both fixed and adjustable static-pressure configurations, incorporating explosion-resistant plates made of steel or aluminum—plus features such as chrome-vanadium springs, heavy-duty covers, and high-strength hardware. RAM produces the three major types of pressure plates: diaphragm, with its reasonable pedal pressures and quick, clean releases; and the more heavily competition-oriented Borg & Beck and long styles. For drag racing, Circle Track, or Street/Strip applications, RAM supplies the clutch performance parts you need.
( 15 )
$185.00
—
$239.00
If you need to replace your Jeep's transmission bellhousing, OMIX-ADA has you covered! Their replacement transmission bellhousings are direct-fit pieces built to OE specifications to ensure top quality and an accurate fit. Count on OMIX-ADA for the replacement components that your Jeep needs.
( 2 )
$390.99
—
$429.99
Replacing your clutch? Pioneer clutch pilot bushings will help you complete the task properly. Their broad selection of OEM replacement bushings are manufactured of 60 percent bronze and 40 percent cast iron to meet OE specifications for size and physical properties. Each bushing is oil-impregnated for long life (applicable models). Heavy-duty pilot bushings and bearings are recommended for performance applications. Pioneer performance pilot bushings are manufactured from 100 percent bronze material to reduce problems caused by heat build-up. Pioneer roller pilot bearings are direct replacements for OEM bronze bushings and use needle bearing sleeves to reduce friction and heat, providing quicker and smoother shifts. They may be small but they play a big role in maintaining your transmission and clutch operation. Guide your clutch to smooth shifts and efficient performance with Pioneer clutch pilot bushings.
( 13 )
$18.99
Centerforce Performance clutch discs will work with both Centerforce I and II pressure plates. Most of them have a carbon-composite organic friction material for longevity and drivability, as well as positive engagements and excellent heat capacity. These clutch discs are designed to withstand the loadings from high-horsepower engines, but are priced for the everyday driver as well.
( 53 )
$178.95
VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.
( 48 )
$118.99
Centerforce dual friction clutches generate up to a 90 percent increase in holding capacity over stock systems. These clutch-and-disc sets are designed for engines producing high horsepower and big torque outputs. Perfect for 4WD vehicles, all Centerforce clutch systems provide smooth engagement and light pedal pressure without compromising high performance.
( 303 )
$377.95
—
$598.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
