Availability
Showing In Stock Items. Show All 12 Items.
FlowKooler Hi-Flow mechanical water pumps resolve low-speed heating problems by doubling flow rates at low rpm and idle. CNC precision-machined impellers feature larger diameters, increased vane count, tighter clearances, shrouding, and porting. These unique design features help drop engine temperatures by up to 30 degrees, increase the block pressure to prevent hot spots on cylinder walls, and stop the formation of steam pockets in the block, all while delaying the onset of cavitation at higher rpm. FlowKooler Hi-Flow mechanical water pump impellers are protected from electrolysis and corrosion with a military-grade Type II Class II anodized surface coating.
( 746 )
$159.99
GMB OE replacement water pumps are precision-built and balanced to meet or exceed original equipment specifications. They're assembled with heavy-duty steel bearings—and are lubricated and sealed for life. Order the model designed for your vehicle application. All GMB water pumps are factory-tested for quality and include the following features: * High-flow design for long-lasting, efficient cooling * Designed for OE fit and performance * Precision-ground shaft and hub accept OE fan clutches perfectly * OE-quality forged housing is specially formed to ensure maximum coolant flow * Pressed-on impeller increases water flow * Unique no-sealant-required gasket makes installation fast and easy * Unitized seal protects bearings for long life and leak-free performance * Factory-sealed, precision-ground, one-piece bearing assembly
( 512 )
$47.99
—
$80.99
GMB high performance water pumps are designed to combat engine overheating associated with higher performance and load applications. They feature a precision-ground, heavy-duty steel bearing that's completely sealed and lubed for life. These replacement pumps have a specially modified, higher performance impeller that eliminates cavitation at all rpm—and maintains maximum volumetric flow of coolant throughout the engine. Order the model recommended for your application. Additional features: * Increase pump pressure up to 300 percent * Eliminate steam pockets trapped inside the engine block * Reduce engine temperature by 15-30 degrees * Help increase horsepower
( 235 )
$90.99
Get maximum cooling for the street or track. Edelbrock Victor Series high-volume water pumps are designed for maximum flow and equal coolant distribution in street cars, race cars, tow vehicles, and motor homes. The aluminum pumps have CNC-machined housings with special one-way internal passages that flow more coolant at higher velocities, even at low engine speeds. The CNC-machined impellers are larger than other impellers and have curved vanes that produce greater flow with less cavitation. Other features include heavy-duty roller bearing assemblies built to withstand higher torsional loads, billet steel hubs, leakproof seals, and gaskets. Most Victor Series pumps are available in your choice of satin, black, and polished finishes, or EnduraShine.
( 179 )
$354.95
—
$365.95
• Milodon’s exclusive high efficiency impeller design is installed into new GMB castings using heavy-duty bearings and large-diameter shafts. It is the impeller that makes the pump work so much better than a standard, stock design water pump. • Milodon water pumps are available in high-volume (steel or aluminum) and standard-volume versions Pumps are direct factory replacements with OEM hose connections and bosses. • These high-volume pumps have a balanced distribution design (equal flow to both sides of the engine block) and a high-efficiency impeller that increases coolant flow up to 30 percent over stock. • These features increase coolant pressure in the block to prevent hot spots and air pockets and improve coolant flow in the radiator. • A high-flow thermostat is recommended when using a high-volume pump.
( 214 )
$143.95
PRW High Performance mechanical water pumps are engineered to deliver increased water flow faster. These super velocity pumps significantly improve cooling for all street, high performance, and racing applications. The low pressure-injected, A356 aluminum alloy pump bodies are complemented by a precision, high-flow cast iron impeller design. Pressure-balanced water passages equalize flow and minimize engine hot spots at any speed. PRW High Performance mechanical water pumps are excellent alternatives for not only racers, but also trucks, towing, and motorhome applications. Order the model recommended for your specific vehicle and engine size. Features, items, and specs: * 35 gpm at 4,000 rpm with minimal cavitation and proportional increased flow rates at 5,000+ rpm * Aircraft industry tolerances * Heavy-duty 0.75 in. diameter steel shafts * Billet steel hubs and shielded-seal roller ball bearings * Back plate O-ring sealed for most applications * System Basis Chip (SBC) applications include adjustable hardware
( 29 )
$161.76
—
$197.87
All US Motor Works mechanical water pumps are designed and tested to meet or exceed OEM specifications. Using advanced research, they include efficient impellers, case-hardened bearings, and unitized seals to provide optimum cooling with performance and longevity. Every US Motor Works mechanical water pump is supplied with a quality mounting gasket and other accessories (seals/gaskets) necessary to properly complete the installation. US Motor Works mechanical water pumps feature: * Case hardened bearings that meet specific radial torque and axial load requirements; they have higher load capacities, are tough on the outside, yet flexible on the inside … ideal for withstanding imbalance or vibration * All mounting surfaces are CNC-machined for easy installation, precision sealing, long component life, and maximum efficiency * Inspected and tested to ISO: 9001:2015 standards * Industry-leading metal impeller integration; metal impellers handle more torque and higher temperatures than plastic to improve high-rpm performance and combat failure caused by broken or distorted impellers * Highly durable metal impellers are also chemical-resistant, withstand variables in high-mileage engines, and are better for transit and storage
( 49 )
$53.99
—
$136.99
ACDelco mechanical pumps are ideal replacement components for many vehicles on the road today. They're manufactured to meet and exceed OE specifications for fit and performance. The pumps are available in many styles, materials, and other options. Order the model recommended for your application. Features and benefits include: * Available for practically all GM vehicles as well as a wide range of non-GM vehicles * Completely pressure-tested for reliable, leak-free performance * Coated seals support seal longevity and durability * Heat-treated shaft assemblies and impellers provide superior strength and durability * High-quality bearings are permanently sealed and lubricated for greater durability and long life * Uniform wall sections and smooth coolant-flow cavities for efficient operation * Cast iron, aluminum, or steel design, depending on vehicle
( 431 )
$41.99
Crown Automotive water pump studs are sturdy steel replacement hardware to make your water pump installation and repair an easier job. Crown offers a large line of OE-style replacement components.
( 1 )
$3.99
Stop overheating! Crown Automotive mechanical water pumps are direct-fit replacements for a vital part required to circulate coolant around your engine. When your pump begins to leak coolant or becomes noisy, Crown OE-style pumps will get you cooled down and back on the road with confidence. Order the water pump designed to fit your application.
( 12 )
$58.99
—
$133.99
OMIX-ADA mechanical water pumps are high-quality cast iron water pumps designed to be exact replacements for your factory water pump. They are made to precise specifications for a perfect fit, as well as a quick and easy installation.
( 3 )
$99.99
—
$136.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
