Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
JEEP Transmission & Drivetrain
Showing In Stock Items. Show All 226 Items.
On Sale
B&M Tork Master Torque Converters
Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
( 196 )
$337.95
—
$460.95
$304.15
—
$413.95
On Sale
B&M Holeshot Torque Converters
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 84 )
$409.95
$367.95
On Sale
BD Diesel Transmission Pans
These BD Diesel transmission pans offer additional oil capacity to keep your hard-working transmission at the proper temperature. They are made from tough cast aluminum to prevent flexing under high-torque loads and come in a high-gloss, powdercoated finish that helps keep the contained oil cool.
( 11 )
$363.95
$316.76
Spicer Drivetrain Products Axle Shafts
Spicer Drivetrain Products axle shafts are manufactured to the same high standards as factory parts because they are original equipment. That means when an automotive axle is replaced with a genuine Spicer part, you're getting the same performance and reliability as when the vehicle rolled off the assembly line. Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products—so the replacement axle shaft you purchase today may even exceed the standards set for the original equipment part you're replacing. Order the model designed to fit your application.
( 89 )
$273.99
—
$467.99
Moser Engineering Jeep Axle Kits
Designed to handle the off-road capability of your Jeep, Moser Engineering Jeep axle kits feature a one-piece, forged design for maximum durability. They include installed wheel studs, Timken axle bearings, seals, and installation instructions. The kits are induction hardened and manufactured from premium quality steel to eliminate any chance of failure. Perfect for your daily driver, or rock crawling machine, these Moser Jeep axle kits provide the performance and reliability your vehicle requires.
( 26 )
$450.00
On Sale
B&M Precision Sport Shifters
These B&M Precision Sport shifters incorporate the latest technology from B&M in shifter development. They are CAD-designed using 3D printer prototypes to allow for different designs and materials, depending on your vehicle application. The shifters feature a fully isolated stick with a spherical pivot bearing that provides for extremely smooth operation and a 30 percent throw reduction. These shifters provide that quick, smooth, precise shifting you need, time and time again.
( 97 )
$422.95
—
$460.95
$379.95
—
$413.95
On Sale
B&M Magnum Grip Pro Stick Shifters
Magnum Grip Pro Stick shifters from B&M include all of the standard Pro Stick features, plus the new Magnum grip handle, CNC-machined from billet aluminum. Compact, strong, and functional--what more could you ask for in a shifter for a drag race car--they're the ultimate shifter for Powerglide applications.
( 22 )
$398.95
$260.46
—
$483.95
Mile Marker Supreme Locking Hubs
Mile Marker Supreme lockout hubs offer all-metal construction. Built to exacting standards, they feature patented technology and smooth operation for the performance that you expect and need. Supreme lockouts are available for many applications, domestic and import, and come in your choice of great looking chrome or stainless steel. These hubs are made by die-casting aluminum into pre-made stainless jackets for the ultimate combination of light weight and corrosion resistance. Replace your old hubs with ones made to be abused--Mile Marker Supreme lockout hubs.
( 195 )
$299.00
USA Standard Gear Spartan Lockers
Spartan lockers are affordable, reliable traction. These USA Standard Gear Spartan lockers are mechanical lockers that fit into a standard differential carrier, replacing the open spider gears. They do not use thrust washers and have a revolutionary spring and pin design to make installation a snap! Spartan lockers feature high-nickel 9310 chromoly drivers and couplers for added strength. Give your vehicle great traction and save some cash. Drop in Spartan lockers for improved traction. They're available for a variety of makes and models spanning more than a half-century.
( 32 )
$255.00
—
$344.00
ATI SFI Flexplates
Made on state-of-the-art CNC equipment, ATI SFI flexplates are double MIG/TIG-welded with certified American-made materials that far exceed SFI specs for safety. They're manufactured and toleranced from actual OEM drawings to ensure precise fit and location. Each is quality-inspected to exceed the flatness and runout tolerances of the OEM units. They are also precision-balanced on Hines digital equipment with a resolution of 1/10 oz. per inch. Available in dozens of configurations, ATI SFI flexplates can be ordered for fitment on vehicles covering every decade since the mid-1950s.
( 74 )
$299.00
Advance Adapters NP231 Slip Yoke Eliminator Kits
The Jeep NP231 is one of the most popular transfer cases, but it creates an extremely short rear driveshaft. These fixed yoke kits from Advance Adapters add 3 to 4 in. to the rear driveline length on a YJ, and up to 6 in. on a TJ. This results in a better driveshaft angle, eliminated driveline vibrations, and a transfer case that's ideal for trail use.
( 62 )
$258.76
Yukon Gear & Axle Master Overhaul Kits
Yukon Gear & Axle master overhaul kits are what you need for a successful differential rebuilding. All of the high-quality parts that you need are provided to do your job right. Yukon master kits go through extensive research to ensure a perfect fit and hassle-free install utilizing the best components, including Timken bearings and races! Choose from their huge selection of kits to meet your replacement application. Yukon Gear & Axle master overhaul kits may include: * Pinion bearings * Carrier bearings * Pinion seal * Crush sleeve or preload shims * Pinion depth shims * Carrier shims (varies by application) * Gear marking compound and brush * Pinion nut * Baffles and slingers (varies by application) * Gasket and/or silicone * Ring gear bolts (for application) * 20-page instruction manual
( 108 )
$253.99
—
$447.99
Centerforce Clutch Hydraulic Master and Slave Cylinders
Centerforce clutch hydraulic master and slave cylinders are of the highest quality available. In most applications the new hydraulics are a direct Original Equipment (OE) replacement, which features a wider range of travel, steel braded lines with a protective heat shield and a Jiffy-Tite dry disconnect for easy installation. Whether you're doing some tough city driving, or racing at a track event, ensure your clutch can handle the demands of your high powered vehicle by installing Centerforce clutch hydraulic master and slave cylinders for improved clutch performance.
( 1 )
$283.95
—
$440.95
On Sale
B&M Automatic Transmission Deep Pans
B&M automatic transmission deep pans provide additional fluid capacity and cooling ability. No modifications to the dipstick are needed. They include a drain plug for clean and easy fluid changes, and are available in chrome or cast aluminum. Filter extensions are included for those applications that require the filter to be moved closer to the bottom of the pan.
( 367 )
$306.95
$276.25
Spicer Drivetrain Products Rear Axle Shafts
Spicer Drivetrain Products rear axle shafts feature application-specific design and engineering, quality materials, precision manufacturing processes, and statistically-controlled testing. Through induction heat treating with a slower scan rate, Spicer delivers more consistent and stronger axle shafts. In addition, the cold-formed rolled spline eliminates the need for machining, which can cause stress fractures and premature failures. The Spicer Drivetrain rear axle shafts are available in a variety of styles, configurations, and options to fit your specific rear axle type.
( 51 )
$259.99
—
$473.99
LuK Clutch Kits
Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.
( 384 )
$255.99
—
$327.99
Yukon Gear & Axle Dura Grip Positraction Carriers
Yukon Gear & Axle Dura Grip positraction carriers offer great traction and strength, and yet are not overly aggressive for the streets. These nodular iron or steel replacements are 4-spring, Raybestos composite, clutch-style, limited-slip carriers—with internal gears machined from forged 4320 steel with stronger teeth. Assembled in the USA, the Yukon differential carriers are rebuildable, allowing for repairs or modifications without buying a new unit. They're available for fitment with nearly two dozen axle models. What are you using to transfer power? Choose smooth operation with strong lockup abilities to transfer torque—benchmarks of the Yukon Gear & Axle Dura Grip positraction carriers.
( 141 )
$438.00
Spicer Drivetrain Products Ring and Pinion Gears
Unleash the performance in your vehicle with Spicer Drivetrain Products ring and pinion gears! They're engineered to meet the specific original equipment standards of Dana axles, delivering a perfect fit with less noise, vibration, and harshness. All Spicer ring and pinions are built to the latest Dana designs—which include premium heat-treat processes and optimal tooth profiles, plus high-grade steel to achieve maximum durability. Even in the most demanding conditions, Spicer ring and pinion gears provide quality and unparalleled performance to genuine Dana axles. Order the set designed for your specific axle model application.
( 14 )
$279.92
—
$425.99
RT Off-Road Performance Axle Kits
OE axles usually do a good job of getting stock vehicles down the road, but larger tires, a heavy foot, and some wicked terrain are a recipe for disaster. RT Off-Road Performance Axle kits improve torsional and tensile strength 30 percent by using heat-treated 4340 alloy steel. All RT Off-Road Performance Axle kits are sold in pairs and feature rolled splines for greater overall strength; they come with hardware, bearings, and seals. Kits that replace original equipment tapered axles with flanged one-piece axles are also available.
( 7 )
$389.99
Powertrax Lock-Right Lockers
Powertrax Lock-Right and performance lockers' straight-line performance is equal to a solid spool axle, yet they automatically unlock to allow for full differentiation in turns. They also reduce the excessive noise, tire wear, and drivetrain damage associated with other lockers. Powertrax lockers replace the spider gears in your differential carrier without affecting your ring and pinion settings. The whole job can be done in your driveway with common hand tools in a couple of hours. A carrier is not included.
( 148 )
$286.99
—
$457.99
Motive Gear Ring and Pinion Sets
Motive Gear is the leading manufacturer of driveline products for just about any vehicle, whether it is a stock daily driver or a full-competition 4x4 or race car. They are proud to offer an unmatched selection of quality components engineered and manufactured for the vehicle and for the way it is driven. Motive Gear ring and pinion sets are engineered to meet or exceed OEM specifications at a price that won't break your budget. Their broad selection of ring and pinion ratios is available for just about every vehicle made from the 1940s through the present. All Motive Gear products meet strict quality standards through advanced manufacturing techniques and are backed by their strong warranty. Their in-house quality control lab utilizes state-of-the-art equipment to continuously check Motive Gear products for strength, tolerance, and hardness. Only after meeting stringent quality standards are Motive Gear products packaged and ready for delivery.
( 285 )
$279.92
—
$488.99
Centerforce I Pressure Plates
Centerforce I pressure plates are the original Centerforce pressure plates. They offer 30 percent more holding capacity than original-equipment clutches, while maintaining a stock pedal feel. Patented centrifugal weights on some applications yield increased clamping force. These pressure plates are recommended as the finest-quality upgrades from stock and stock-type units.
( 10 )
$262.95
—
$335.95
Silver Sport 621 Manual Transmission Bellhousings
Silver Sport 621 manual transmission bellhousings are a good match for your street or trip transmission. Re-engineered by SST, these aluminum 621 GM reproductions feature CNC-machined, thick wall titanium-aluminum alloy construction for Chevy engines with 168-tooth flywheels.
( 1 )
$319.95
Centerforce II Pressure Plates
Centerforce II pressure plates provide 60 percent more holding capacity than the pressure plates in factory original-equipment clutch setups. They're recommended for street and strip use on mildly modified vehicles. These pressure plates have also proven themselves to be very capable when used for 4WD vehicles, heavy-duty towing, commercial, and off-road applications.
( 14 )
$272.95
—
$367.95
