Availability
Showing In Stock Items. Show All 32 Items.
On Sale
Whether you're setting up ring and pinion gears or doing general differential repair, do it with Yukon Gear & Axle carrier bearing pullers. These tools work with an impact gun to quickly and safely remove your carrier bearings while minimizing the risk of damage. These pullers come with a handy bench top-stand and work on most standard size carrier bearings and pinion bearings on differentials. For all of your drivetrain needs, use Yukon Gear & Axle!
( 5 )
$636.99
—
$769.99
$541.44
—
$654.49
McGard's spline drive lug nut sockets are must-haves when using McGard's spline drive lug nuts to keep your wheels on your ride, where they belong. These sockets have a no-compromise patented design that's engineered to fit small-diameter recesses in new tuner-style wheels.
( 24 )
$13.99
—
$21.99
These SPC Performance truck/SUV ball joint presses are designed to remove old, worn-out ball joints and install new ones. They feature a forcing screw press and adapters that can easily install all press-in style ball joints. The presses include a handy plastic carrying case that is perfect for storing them when not in use.
( 3 )
$206.99
Test your cooling system's pressure with these accurate testers from MotoRad. These testers will test today's higher pressure cooling systems and pressure caps up to 30 lbs. The gauges test pressure ranges of 17 to 19 lbs., 20 lbs., and 28 to 30 lbs., with a color-coded dial that makes it simple to accurately test higher pressure caps and systems. A pressure release bar releases pressure buildup before removing the head from the neck. These MotoRad cooling system pressure testers come in a plastic carrying case with an easy-to-use instruction manual.
( 2 )
$106.99
RAM billet steel alignment tools are precision-machined for perfect alignment of clutch discs. These specialty tools feature an open backside that allows the clutch pack to be progressively loaded without having to juggle all of the parts when performing the clutch install. Tool models are available to service a variety of pilot and shaft diameters, as well as input spline quantities. This is a must for installing any dual disc clutch unit.
( 53 )
$49.00
Manufactured by Excel from Richmond, these axle seal installation tools are designed to safely and evenly apply pressure to the inner axle seal to press it into the axle housing without damaging the seal. The different inner and outer diameters of the puck part of the tool press can be used on many different seals. This superior quality tool provides more efficiency to save you time and is available in several models to work on a broad range of applications, including Dana 30, 44, 50, 60 and Dana 44 ICA. Choose the axle seal installation tool in the model designed for your application needs.
( 1 )
$63.99
On Sale
Centerforce clutch alignment tools are designed to align the flywheel and clutch disc for the trouble-free insertion of the input shaft. They're available for a wide variety of applications.
( 76 )
$7.95
$7.16
Summit Bucks
Are you replacing worn ball joints? Don't worry--Moog ball joint tools are there to help. Moog designed these tools with the professional mechanic and DIY specialist in mind. Don't struggle with lesser tools, trust the same Moog ball joint tools that the professionals trust.
( 3 )
$41.99
TeraFlex lower ball joint preload adjusting tools enable you to easily to adjust the lower ball joint preload amount. This preload tool is a must have for your new or broken-in TeraFlex HD ball joints.
( 1 )
$12.99
When you're ready to remove your axle nuts, you'll need OMIX-ADA axle nut sockets. These 2 1/16 in. spindle nut sockets fit the spindle nut on Dana 25, 27, and 30 axles found in 41-86 Willys/Ford/Jeep models.
( 14 )
$11.99
On Sale
Yukon Gear & Axle inner axle side seal installation tools ease the frustration of getting your axle seals aligned properly. Having the right tools makes any job easier, and not having them can make the job miserable, if not downright impossible! These specially designed tools are simple to use. So, un-complicate the installation of new seals on your Dana axles with the right tools--Yukon Gear & Axle inner axle side seal installation tools.
( 9 )
$221.99
$188.69
On Sale
Yukon Gear & Axle differential carrier shim installation drivers are amazingly self-explanatory. They help you install carrier shims on the differential carrier. The tools include five different size shims, so they can be used on a variety of Ford, GM, Mopar, or AMC differential carriers.
( 4 )
$200.99
$170.84
Reducing valve bore within a transmission valve body can wear out over time, causing hard shifting, fault codes, and solenoid failures. TransGo reducing regulator reamer and guide tools provide an inexpensive solution for repairing regulator valve bores to eliminate further issues. These reamer tools are made from high-quality steel to ensure durability when drilling and are the same type of tool that can be found within the TransGo shift kits.
Not Yet Reviewed
$86.14
Are you servicing your Jeep's ball joints? Let OMIX-ADA help with their ball joint service tools. These tools are designed for easier removal and installation of your upper ball joints.
( 6 )
$27.99
On Sale
There are many steps in setting up a new ring and pinion, and none should be taken lightly. When it's time to set up the pinion preload, you'll appreciate the assistance of Yukon Gear & Axle pinion yoke holders. These specialty tools firmly hold the yokes in place and are compatible with almost all differentials. Yukon Gear & Axle pinion yoke holders make setting pinion preload settings a much easier process.
( 2 )
$174.99
$148.74
On Sale
Yukon Gear & Axle setup bearings easily slip on and off the pinion journal to allow for pinion depth adjustment. These setup bearings ensure you have the proper tolerances needed and are a great addition to your toolbox!
( 3 )
$164.99
$140.24
These SPC Performance spanner wrenches have been specifically designed for the installation and removal of OEM and aftermarket screw-in 4-wheel drive alignment sleeves. They are made of steel and can be used with standard hand tools.
( 1 )
$34.99
Dorman multipurpose funnels are available for any number of automotive maintenance applications. They're constructed of quality materials for longevity and are available in a range of sizes. Direct your fluids precisely into their reservoirs without spilling onto other engine parts—economical Dorman funnels make it possible!
( 9 )
$6.99
SPC Performance bushing press sleeves are designed for use with SPC's ball joint press. They can easily remove the stock control arm bushings and install aftermarket bushings. The sleeves are made from hardened steel for durability, and available in a variety of configurations for use on numerous makes and models.
Not Yet Reviewed
$77.99
OTC's sockets are made from high strength steel and are designed to resist rounding out. Most OTC sockets can be used with an extension and a torque wrench. Available for many applications.
( 19 )
$47.99
On Sale
Crown Automotive spindle nut sockets for your spindle drive wrench are constructed from steel with a black finish. Crown Automotive has more than just the quality parts you need to keep your Jeep tip-top. They also have the right tools to get the job done easily, while keeping your fingers and screwdrivers out of the grease. These sockets are well-built and tough.
( 6 )
$15.99
$14.39
On Sale
Simplify installing the manual transmission in your vehicle with Crown Automotive clutch alignment tools. They are designed to align the flywheel and clutch disc for problem-free insertion of the input shaft. If you're putting your new clutch in yourself, these tools are must-haves for a proper and easy alignment!
( 1 )
$5.99
$5.39
On Sale
Whether you're a seasoned professional or a weekend mechanic, Sunex Tools spindle nut socket wrenches will help you get the job done right saving you time, money, and a lot of frustration in the process. Forged from CR-V alloy steel for maximum strength, these specialty tools will make your spindle removal and install easier--you'll wonder how you ever got along without it!
( 1 )
$18.99
$17.09
On Sale
Yukon Gear & Axle differential bearing preload tools, spanner wrench, and side adjusters are all constructed from high-quality materials and have simplistic designs to make your life easier when you're working on multiple different vehicle applications. Whether you're looking for bearings, differentials, or side adjustment, Yukon Gear and Axle has you covered.
( 9 )
$141.99
$127.79
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
