Availability
Showing In Stock Items. Show All 65 Items.
On Sale
DiabloSport PredatorX tuners deliver the latest in tuning technology, allowing you to take control of your tuning needs from your smartphone. The iOS/Android compatible apps pair with the PredatorX dongle to give you complete tuning access from your pocket. The OBDII dongle can stay connected to the vehicle full time, so you're always just seconds away from being able to make tuning changes. The tuners are preloaded with power adding tunes for multiple octane levels, as well as transmission tunes for applications where they are needed. For those seeking more than the provided tunes offer, there is a plethora of end user based parameters that can be adjusted. Speed limiter, tire size, timing and fueling at wide-open-throttle, rev limiters, idle speed and so much more can be adjusted through the PredatorX. Features: iOS and Android support Tune from your smartphone! Preloaded with Performance tunes Trucks get tunes for 87 octane and Premium fuel Performance cars get tunes for 91 and 93 octane fuel TCM tunes are included End user adjustable parameters Disable AFM! Calibrate Speedometer for Taller Tires Set axle ratio if you've swapped gears Remove Speed Limiter Adjust Idle Speed Raise Rev Limiters Live data monitoring Read/Clear Diagnostic Trouble Codes (DTCs) Adjust options like idle, speed limiters, rev limiters, tire size, gear ratios and more. Support for 07-18 GM gas trucks and SUVs, 05-19 Corvette, and 10-24 Camaro V8, and more!
( 14 )
$295.95
$266.35
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1973 )
$118.95
$107.05
On Sale
ACCEL Extreme 9000 ceramic wires are the cure for burnt spark plug boots. These wires provide excellent energy delivery while providing the highest level of RFI/EMI suppression. They're ideal for custom engines, boats, and RVs—plus great trackside accessories when you need to make up a replacement wire. ACCEL Extreme 9000 ceramic spark plug wire sets are available straight or in right-angle configurations. Order the set recommended for your vehicle and engine application. More product features include: * Finished with stainless steel spark plug terminals and ceramic spark plug boots * Each wire features ultra-high temperature double silicone wire rated at 600 degrees F * Ferro-Spiral core wire developed for performance use * Capable of withstanding up to 2,000 degrees F
( 464 )
$160.95
—
$189.95
$144.85
—
$170.95
On Sale
Hays heavy-duty flexplates for high performance and competition engines are constructed from a thicker-than-stock steel plate. This enables them to withstand the stress of high-stall torque converters and high-rpm engines. While factory stock plates tend to crack around the crankshaft hub when punished under high-torque and rpm conditions, the thicker Hays flexplates can handle the force. These heavy-duty flexplates are supplied with a ring gear that is securely welded in place. All Hays heavy-duty flexplates are zinc-dichromate plated to resist corrosion and SFI-certified under specification 29.1.
( 63 )
$205.95
$185.35
On Sale
JET Powr-Flo mass airflow sensors are designed to deliver improved horsepower, torque, and mileage from your car, truck, or SUV by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET mass air sensors provide airflow increases of up to 45 percent and installs in 10 minutes or less. They are compatible with other aftermarket upgrades including but not limited to: Performance tuning (chips, modules, etc.), exhaust modifications (cat-back, headers, etc.), cold air intakes, and ignition systems. Order the model designed to fit your needs.
( 245 )
$187.46
—
$322.46
$168.71
—
$290.21
On Sale
WeatherTech seat protectors are the perfect accessory for owners needing protection for their front and rear vehicle seating. These seat protectors are made from a poly/cotton twill fabric with a durable water-repellent finish that will combat any juice box spill, cereal crumbs or pet mess! They also feature an extra-layer of nylon lining to further protect the covered seat(s). Additional features of WeatherTech seat protectors include: * Semi-custom to fit the size and type of most year 2000 vehicles * Fits most bench and bucket-style front and rear seats * Quick and easy installation, as well as easily removable for cleaning * Stays in place with durable straps, specialty inserts and a non-slip bottom * Seat protector is machine washable and reusable Please note: you must have a headrest on the seatback of your vehicle for the WeatherTech Seat Protector to strap on to. Also keep in mind, if your vehicle is equipped with a center seatbelt, it will not be accessible with installation of the seat protector.
( 14 )
$138.95
—
$201.95
$125.06
—
$181.76
On Sale
Flowmaster FlowFX mufflers feature mandrel-bent bright stainless steel tubing, mated to specially designed straight-through for great sound and maximum performance. FlowFX 409 stainless steel mufflers deliver a moderate to aggressive interior and exterior sound level that will appeal to anyone looking for a deep, powerful exhaust note.
( 394 )
$167.95
$151.15
On Sale
Give some more spark to your ignition system using these Professional Products LSX high performance coil packs. They provide a maximum voltage of 40 kV and the longest spark duration available. The coil packs fire 1/8th as many times as the old single coil systems, providing eight times as long for the coil to regenerate power for the next spark. On multiple coil setups like these LSX high performance packs, longer spark duration is highly desirable to ensure that 100 percent of the intake charge is ignited—for maximum power throughout the entire rpm range.
( 21 )
$129.99
—
$185.99
$116.99
—
$167.39
On Sale
Vision Off-Road 111 Nemesis Series gunmetal wheels with matte black simulated beadlock ring are available in a range of diameters and lug patterns. Forged from lightweight aluminum, these wheels come with a removable nylon Rock Rash bead ring and Grade 8 zinc bolts, adding more visual appeal to the rim. Order the wheel fitment for your application needs.
( 1 )
$269.98
$242.98
On Sale
Clearance
Give your ride a tough new look with the Vision Off-Road 355 Manx 2 Overland Series satin gray wheels. These wheels are constructed of durable aluminum and feature a great looking split 6-spoke design. Each of these satin gray wheels feature a black center cap making it look at home on the street or the trail. Order the Vision Off-Road 355 Manx 2 Overland Series satin gray wheels and install them on your ride—they are guaranteed to turn heads!
( 5 )
$216.99
$195.62
On Sale
Vision HD 353 Turbine Series matte black wheels produce continual visual power and performance. Featuring a nine-spoke design, these durable, one-piece cast aluminum wheels with a smooth black finish and branded center caps offer a great look for your heavy-duty truck or trailer. Available in a variety of bolt patterns, diameters, and offsets, Vision HD 353 Turbine wheels offer a perfect fit for your toy hauler needs.
( 1 )
$223.99
—
$225.99
$203.90
—
$214.24
On Sale
PRW cylinder head stud kits offer heavy-duty fasteners, along with 12-point nuts and washers for Ford Powerstroke engines. These replacement studs are machined from 4135 chromoly steel and finished with a black oxide. They provide superior clamping power, compared to the stock bolts—which will solve the problem of head gasket failure caused by increased cylinder pressure.
( 1 )
$269.96
$229.47
On Sale
When tested against a competitor's coil, the MSD Pro Power coils produced 33 percent more current at the plug. They have an oil-filled insulated polyester case, an extra-tall high-tension spark plug tower to stop voltage leaks, and rubber shock mounts. They're designed for drag race use only, with MSD 7 and 8 Series ignitions.
( 41 )
$184.95
$166.45
On Sale
Add king-of-the-mountain style to your truck with Raceline Wheels awesome Rockcrusher black wheels. These heavy-duty aluminum wheels feature a non-functional beadlock design. They come available in a multitude of sizes and bolt patterns to take your truck to the top of the mountain.
Not Yet Reviewed
$249.00
$224.10
On Sale
Raceline Wheels 947 Scout satin black wheels feature a rally-inspired 8-spoke design with vented barrel interior. The one-piece cast aluminum rims are available in a variety of widths, diameters, bolt patterns, and other fitment options. They include a black-out bolt-on cap with contrasting embossed Raceline logo. Additional details: * Constructed from heavy-duty A356 aluminum * Available in 15 to 20 in. diameters as well as some CUV fitments * Passes or exceeds all DOT standard load ratings * Hub centric fitments available for select vehicles
Not Yet Reviewed
$289.00
$260.10
On Sale
Holley LS valley covers are the latest accessories offered for the GM LS engine platform. These covers install between the two banks of cylinder heads, depending on your usage of knock sensors, displacement on demand, and active fuel management. They're available in a cast aluminum finned design to match Holley's popular valve covers, as well as a billet aluminum trussed version for a race-inspired look. The valley pan covers are offered in a variety of finishes.
( 2 )
$226.95
$204.25
On Sale
Flowmaster 50 series Big Block mufflers have proven to not only significantly improve acceleration and towing power, but to simultaneously increase fuel economy as well. Because of their efficiency, underhood temperatures on trucks and motor homes can be reduced as much as 200 degrees F--helping to lengthen the service life of other engine components. These mufflers are designed and sized for larger gas and diesel engines typically used in towing vehicles and RVs. So, for more comfortable cruising, Flowmaster tuned them for reduced exterior exhaust sound and lower levels of interior resonance.
( 34 )
$299.95
$269.95
On Sale
These JET Powr-Flo throttle body spacers use aerospace engineering combined with years of experience. The exceptional design of the bore causes the incoming airflow to actually smooth out and speed up. This creates a type of compacted air-charge that enters through the throttle body and builds pressure in the combustion chamber. This will result in an extensive gain in the midrange power band and an overall increase in fuel economy.
( 70 )
$129.71
$116.74
On Sale
Vision American Muscle 54 Cheyenne Series wheels feature a recessed center hub designed for exposed lugs—surrounded by soft trapezium windows. The one-piece cast aluminum rims have a matte silver finish with machined lip, and are available in a variety of widths, diameters, bolt patterns and other fitment options.
( 3 )
$272.46
$245.21
On Sale
Vision Off-Road 375 Warrior Series gloss black with machined face are available in a wide range of sizes, bolt patterns, and offsets to pair with your rig. The one-piece rims are built to be tough from premium aluminum alloy to reduce your curb weight. Combined with the split-spoke design and lip accents, these Warrior series wheels are sure to make a statement wherever you go.
( 25 )
$238.99
$194.58
On Sale
And you thought Raptors were extinct! Raceline Wheels puts their years of building experience into these rugged Raptor machined wheels. Their tough, one-piece aluminum construction displays eight "V" slotted spokes gripping the outer rim with riveted accents machined with a glossy black background. Raceline's combination of black and silver creates a sporty look for your truck or SUV that will never die. Catch some Raptor wheels for your ride and take advantage of Raceline pricing.
( 10 )
$315.00
$283.50
On Sale
Superlift Level-It systems do a great job without busting your budget. Level-It components work with factory suspension components to achieve modest ride height gains without a lot of hassle, and these precision-made products (forged steel torsion keys, steel spacers, and strut extensions) are stronger than OEM parts. Level-It parts are given a protective powdercoated finish, and installation/removal is easy and takes about two hours of your time. Whether you're restoring height lost from heavy front bumper/winch combos, plus-sizing the vehicle's tire and wheel package, or enhancing your truck's look by leveling its stance, these simple and effective Level-It systems from Superlift will do the trick.
( 43 )
$149.99
$127.49
On Sale
Vision Off-Road 405 Korupt Series wheels feature a concave profile, five diamond-shaped spokes, decorative notches circling the outer lip, and a smooth satin black finish. The one-piece cast aluminum rims are available in a variety of fitment options. The perfect blend of style, strength, and performance!
Not Yet Reviewed
$305.90
$275.31
On Sale
Bully Dog has always been there to make your vehicle perform the way you want it with their programmers and tuners for gas and diesel powered trucks and SUVs. One of the problems with all modern-day vehicles is the throttle is operated electronically, not by a cable, so the vehicle computer dictates how much throttle to give. Bully Dog Thruster throttle boosters are here to help. This simple to use plug-and-play system gives you the throttle you want when you want. Installation is simple and can be removed anytime. Simply unplug the factory harness from the pedal, plug the Bully Dog Thruster throttle booster into the pedal and the other side into the vehicle harness. A rotary switch allows you adjust the sensitivity on-the-go so you can dial in the throttle you want. Bully Dog Thruster throttle boosters will amaze you with the performance gains you will achieve with this small device.
Not Yet Reviewed
$138.99
$125.09
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
