Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
HUMMER H3 Engines & Components
Showing In Stock Items. Show All 263 Items.
Melling Performance Oil Pumps
Melling's years of experience are apparent in these Performance oil pumps. They boast a CNC-machined body and cover and hardened steel gears that are up to 25 percent longer, providing additional flow to performance engines with wider bearing clearances. Their drive and idler shafts have been extended into the cover to provide additional support and eliminate dynamic shaft deflection.
( 197 )
$155.99
—
$201.99
Summit Racing™ Bracket Racer SFI Harmonic Dampers
You don't have to sacrifice safety or quality to save money; our affordable Summit Racing™ bracket racer SFI dampers have been spin-tested to 12,500 rpm and carry an SFI-18.1 rating. The carbon steel dampers have an injection-molded and bonded elastomer, easy-to-read engraved timing marks, removable counterweights (where applicable), and a highly polished baked-enamel finish, so they look as good as they perform.
( 394 )
$228.99
Melling High-Volume Oil Pumps
Melling high-volume oil pumps give you an additional 20 to 25 percent of much-needed oil volume for your performance application. For those of you who need added pressure, many pumps are supplied with a high-pressure spring (where noted). The pumps are built using a proprietary casting process, which yields maximum performance and reliability. Every Melling oil pump is completely pressure-tested, including idle and bypass pressure, before it leaves the factory. Dozens of models are available for fitment; order the pump and options needed for your vehicle.
( 364 )
$110.99
—
$213.99
Clevite H-Series Main Bearings
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 141 )
$123.99
—
$163.99
King XP-Series Rod Bearings
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 69 )
$69.99
—
$96.99
King XP-Series Main Bearings
Built with enhanced tri-metal, King XP-Series main bearings have a layered copper lead construction, with a nickel plate barrier and lead/tin/copper Babbitt overlay over a steel backing--in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors: an amazing +/- .0001 in. The XP-Series main bearings are narrowed for large radii crankshafts and feature enlarged, chamfered oil holes with full, 3/4 in., or 1/2 in. grooving for improved oiling. They deliver consistent and reliable performance with a high-load capacity. These race-only Xtreme Performance (XP-Series) Tri-Lecular main bearings are proven track-tough to handle the ground-shaking power of your race engine. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 44 )
$119.99
—
$138.99
Melling Factory Hydraulic Roller Lifters
Melling factory replacement hydraulic roller lifters are designed and built to get the job done while ensuring efficient performance and quiet valve train operation. They are perfect for when you're ready to freshen up your engine. Melling factory hydraulic roller lifters are manufactured from the finest materials and designed for the proper fit and long dependable lifter life.
( 20 )
$24.99
Chevrolet Performance Engine Valley Covers
These Chevrolet Performance engine valley covers are made of aluminum. They can be used for Chevrolet Performance SB2.2, Spider-type, intake manifolds, runners, or race applications.
( 47 )
$209.99
Dura-Bond High Performance Cam Bearings
Dura-Bond high performance cam bearings are ideal for racing. They offer double the fatigue strength of standard bearings.
( 108 )
$7.99
—
$28.99
Chevrolet Performance Stock Replacement Non-DOD Camshafts
If you're looking for a cost-effective camshaft solution to delete that pesky DOD—Chevrolet Performance stock replacement non-DOD camshafts are the answer. They're designed to work with OEM valve springs/pushrods in the DOD-equipped Gen 4 trucks. These OEM camshafts are standard equipment on non-DOD 5.3L trucks. Since they come as a single-bolt style, new timing gear won't be necessary. Just swap cams and additional DOD delete parts (sold separately) and you're ready to roll! A fairly stock truck shouldn't require dyno tuning; however, the DOD system must be disabled in ECU for proper functionality. It is advised to consult with your tuner for more information. Order the model recommended for your year/make and engine application. Additional features include: * Hydraulic roller tappet cam * Single-bolt camshaft gear attachment * Computer-controlled compatible * This is the camshaft only (other components sold separately)
( 18 )
$357.99
Melling Oil Pumps
Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.
( 325 )
$72.99
—
$112.99
ACDelco GM Genuine Parts Engine Valve Lifter Guides
ACDelco GM Genuine Parts engine valve lifter guides keep the lifters from rotating. These GM-recommended replacements deliver peace of mind that the fit, form, and function are of the highest standards. Order the guides designed for your GM year/make and engine application.
( 5 )
$13.99
King HP-Series Rod Bearings
King HP-Series rod bearings were developed mainly for drag race applications needing a material harder than the Babbitt top layer. These applications demanded a structure that could withstand high loads for short durations and still offer higher embeddability and compatibility. In response, King developed the HP-Series, featuring the Alecular metal structure. The HP-Series is also suited for many performance applications with nodular cast iron crankshafts, such as street, strip, and some levels of Circle Track racing. Order the set recommended for your vehicle. HP-Series bearings are particularly suitable for the following cases: * When a tri-metal bearing's Babbitt overlay extrudes over the sides, migrates to one end, or is physically removed by the crankshaft * When the intermediate layer of a tri-metal bearing is exposed, damaging the crank journal and requiring expensive grinding or replacement * When contaminants enter the oil stream, scratching and damaging the crankshaft journals
( 36 )
$62.99
—
$95.99
Mahle Original Premium Piston Ring Sets
Mahle Original piston ring sets are designed to be installer-friendly. They are pre-lapped to seat immediately, virtually eliminating break-in time. Ring materials and coatings, as well as ring tension, are all optimized for reduced friction and extended life in each application. The compression rings feature a barrel-faced contact area for more efficient compression and CNC-controlled gap chamfer to optimize compression and reduce blow-by. Intermediate rings have a reverse twist design for better groove side sealing, and taper race machining to enhance contact. The CP-20 oil ring assemblies feature a 20 degree ear angle, an exclusive feature that provides the best possible side seal against the cylinder wall, and a special chemical polish on the oil ring expander offers enhanced oil drain back. Mahle Original piston ring sets provide unmatched quality and ease of installation, making them the rings of choice for today's engine builders.
( 56 )
$47.99
—
$82.99
King SI-Series Main Bearings
King SI-Series main bearings are recommended for OE applications. These replacement bearings are designed for aftermarket gasoline or diesel engine rebuilding—and performance engines with factory crankshafts. The bearings have an improved crankshaft finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series main bearings feature improved oil clearance to reduce wear and increase engine life, which in turn reduces operating noise, vibration, and excess oil flow. Order the bearing set designed for fitment on your make and model.
( 87 )
$40.99
—
$124.99
ACL Performance Race Series Rod Bearing Sets
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 8 )
$83.99
—
$141.99
Chevrolet Performance Replacement Timing Chains
Replace your timing chain with a new one from Chevrolet Performance. Designed specifically for your engine, many applications are available.
( 1 )
$74.99
K&N Performance Gold Oil Filters
Get oil filtration that's as good as gold with K&N Performance Gold oil filters. Keep your engine free from contaminants as small as 10 microns. They use a resin-impregnated filter media to provide maximum filtering and an inner core to lend extra structural support to the filter, preventing filter collapse. Plus, many of these K&N oil filters have an anti-drainback valve (where applicable) that eliminates dry starts and prevents oil from draining back into the crankcase during engine shutdown. And they're protected by a heavy-duty outer shell that guards against rock and stone damage and provides over 550 psi hydrostatic burst strength. So, if you want golden-level oil protection, then you want K&N oil filters.
( 516 )
$15.99
—
$17.99
ACDelco GM Genuine Parts Harmonic Balancers
ACDelco GM Genuine Parts harmonic balancers help reduce torsional vibrations by connecting to the crankshaft of your vehicles engine. They serve as pulleys for your engine's accessory drive belts, and are GM recommended replacements for your vehicle's original component. These GM Genuine Parts harmonic balancers have been manufactured to fit your GM vehicle, providing you with the same performance, durability, and service life you expect from General Motors.
( 49 )
$124.99
ACL Performance Race Series Main Bearing Sets
ACL Performance Race Series main bearing sets deliver everything performance bearings should be by utilizing design, metallurgy, engineering, precision quality control, and of course, years of knowledge and experience. Main bearings feature multi-layered tri-metal copper alloy construction that blends characteristics to provide high strength and excellent seizure resistance. They are manufactured to exact tolerances ensuring a reliable fit and helping to maintain consistent clearances. Main bearings are augmented with extended grooves, as well as other bearing enhancements, like increased crush, bearing eccentricity, and enlarged I.D. chamfers. ACL Performance Race Series main bearing sets are produced in standard and extra clearance versions, with or without friction reducer coating, and with modifications to meet specific build requirements, such as narrowed bearings that permit additional edge clearance when running crankshafts with exceptionally large fillet radii. In the heat of competition proven technology always comes through. The choice for your build should always be ACL Performance Race Series engine bearings. Choose the main bearing set designed for your vehicle.
( 1 )
$149.99
—
$205.99
Sealed Power MA Series Main Bearings
These Sealed Power MA Series main bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank whose surface hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better control of wall variance. It also helps to minimize debris embedding, which can score the crank's surface.
( 76 )
$90.99
—
$111.99
King HP-Series Main Bearings
King HP-Series main bearings are recommended for street and strip performance applications. They're designed for blown, turbocharged, NOS, and alcohol-fueled engines using aftermarket crankshafts. These main bearings have greater eccentricity for superior oiling at high rpm, and a chamfered surface for large radii crankshafts. HP-Series bearings also feature large, chamfered oil holes—and are available in 1/2 grooving for improved oiling to withstand high-rpm applications. Order the bearings designed for fitment with your specific engine.
( 48 )
$113.99
—
$151.99
Chevrolet Performance Oil Pumps
Chevrolet Performance oil pumps are offered for an extensive range of cars, trucks, vans, and SUVs. Made from high-quality materials by a name you trust, they're available in both wet and dry sump styles, as well as standard and high-volume. Order the oil pump model designed for fitment on your vehicle application.
( 9 )
$132.99
Melling Valves
It's never a good idea to cut corners when you're installing new valves. Melling is noted for its world-class engineering, superior grade alloy materials, and advanced manufacturing processes. Melling intake and exhaust valves meet the exacting specifications required for efficient, durable, and powerful performance. They feature high-fatigue strength, excellent heat resistance, and offer years of dependable service. Available in a wide variety of designs and materials for most OEM and performance vehicle applications, each valve is built and validated to meet or exceed OE specifications. Melling valves—unsurpassed quality you can trust.
( 45 )
$8.99
—
$32.99
