Availability
Showing In Stock Items. Show All 48 Items.
ACDelco Gold Automotive AGM batteries have high-cycling capabilities, are remarkably charge-receptive, and are necessary for start/stop applications. These batteries are also maintenance-free, 100 percent pressure-tested against leaks, and are manufactured to resist corrosion. Best of all, they are backed by ACDelco's outstanding warranty coverage. When reliable starting power is a priority— ACDelco Gold Automotive AGM batteries are the answer! Additional features include: * Absorbed Glass Mat design is 100 percent leak and spill-proof, because the electrolyte is permanently held in the glass mat separator, instead of free flowing within each cell * Oxygen recombination reduces water loss and reassures maintenance-free performance * ACDelco Gold Automotive AGM batteries have longer life expectancy in traditional vehicle applications, due to a maintained pressure on the plates, which significantly reduces the amount of active mass lost from the grid
( 308 )
$182.99
—
$190.99
Optima RedTop Starting 12-volt batteries are the ultimate power source for cars, trucks, SUVs, hot rods, and other high-performance vehicles. They're engineered with unique Spiralcell technology, delivering a stronger burst of ignition power, while extending the battery life up to three times longer than conventional models. Maintenance-free RedTop AGM batteries are sealed, leak-proof, and resistant to vibrations—so you can mount them anywhere and in virtually any position on your vehicle. Order the Optima battery designed for your application, and expect a perfect start every time.
( 1513 )
$269.99
NTK is the world's leading supplier of OEM oxygen sensors. They're individually tested to ensure the highest level of quality and reliability—designed to continuously detect the composition of exhaust gases. As the output from the sensors changes, the ECU instructs the fuel mixing system to alter the mixture. This ensures that the air/fuel mix is always correct and promotes efficiency. A new NTK oxygen sensor can help lower emissions, improve fuel mileage and engine efficiency, and extend catalyst life. These components meet or exceed OE specs and are equipped with waterproof, factory-fitted connectors to ensure a perfect fit every time. Order the model recommended for your vehicle.
( 80 )
$112.99
Bosch remanufactured alternators and generators have new parts and are performance-tested to ensure longer, more reliable, vibration-free, and quiet operation with maximum performance. Features: * Full-load tested to guarantee compliance with Bosch's strict performance specifications * 100 percent factory-tested, units are remanufactured (not rebuilt) * Rotor slip rings machined to the toughest concentricity specifications in the industry for increased brush life and reduced electrical interference on computer-controlled vehicles * 100 percent new high-quality bearings * Voltage regulators and rectifiers tested (and replaced where required) ensuring stable voltage output and eliminating shorts and open circuits for maximum reliability, cranking, and starting * Built to last using high-quality materials and the most technologically advanced developments
( 20 )
$219.99
Denso alternators are not only original equipment on many of the world's top production cars; they are a favorite in motorsports as well, where their light weight, high-efficiency, and durability make them the natural choice. Denso remanufactured alternators go through a grueling process; stators and rectifiers are tested to 300 V, while rotors are submitted to 600 V, to ensure reliable performance. Rotor slip rings are buffed to an 8 micron surface finish, with run out limited to 20 microns, minimizing brush wear and abrasion. Bearings are validated to OE standards and loaded with premium OE-specification lubricants. Offered in wide range of amp ratings for hundreds of specific vehicle applications, all alternators meet Denso's rigorous First Time Fit standards. Contemporary vehicles employ dozens of sophisticated electronic systems, placing heavy demands on the charging system. The alternator is no place to cut corners. Additional features of Denso remanufactured alternators include: * Meet or exceed all manufacturer standards, and provide years of reliable service * First Time Fit provides perfect mounting with no belt/pulley alignment issues * Housings re-tapped and damage-checked for heat warping, corrosion, or improper surface alignment * Voltage regulators 100 percent tested to OE standards * All hardware stripped and replated * Premium cores and precise OE-assembly benchmarks * Designed to meet grueling heat and electrical requirements * OE-quality fit and appearance * Full compatibility with sensitive electronics systems
( 52 )
$173.99
—
$205.99
These V-Force Plus power control modules are designed for the performance enthusiast who wants improved performance, acceleration, and the ability to monitor vehicle information. V-Force Plus power control modules are designed around a 20 MHz RISC processor. V-Force Plus power control modules optimize ignition advance and fuel maps for optimum horsepower and drivability. In addition, the software in the program allows you to select from 14 different screens to monitor throttle position, mass airflow, manifold pressure, fuel economy, and air/fuel ratio. This allows you to monitor your driving habits for the best fuel economy and performance.
( 12 )
$299.96
Denso air/fuel ratio sensors (A/F sensors) were developed to measure air-to-fuel ratios under a wider range of driving conditions than oxygen sensors. A/F sensors, also known as wide-band oxygen sensors, send information to the engine management computer to make adjustments based on driving conditions. Their wider range and variable adjustments allow engines to burn fuel more efficiently and produce fewer emissions. As A/F sensor technology has evolved, Denso has been there every step of the way. From the first thimble-type sensors to today's heated, quick-response sensors required to meet ever more stringent emissions regulations, Denso has supplied OEMs with quality components and continues to innovate. Denso helped to develop this important technology and you can rely on Denso First Time Fit A/F sensors. Features and benefits of Denso air/fuel ratio sensors include: * Tarnish-proof platinum electrode provides longer life and maintains accuracy * Quick-response planar zirconia element quickly detects oxygen concentration * Measures air/fuel ratios from approximately 12:1 to 19:1 * Increased performance by mapping air/fuel ratios throughout the RPM range * Lower emissions by optimizing the air/fuel mixture * Reduces fuel consumption and maximizes catalytic converter life * First Time Fit design delivers the right part the first time
( 22 )
$101.99
—
$146.99
Are you having problems with your electronic throttle? If so, then pick up one of these Dorman accelerator pedal position sensors. They are designed to indicate the position of the accelerator pedal by converting the accelerator pedal movement into two electrical signals so that the computer can provide the proper change in throttle position. Available for a variety of vehicles, the Dorman accelerator pedal position sensors are sure to solve any of your electronic throttle issues.
( 16 )
$133.99
JET Powr-Flo mass airflow sensors are designed to deliver improved horsepower, torque, and mileage from your car, truck, or SUV by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET mass air sensors provide airflow increases of up to 45 percent and installs in 10 minutes or less. They are compatible with other aftermarket upgrades including but not limited to: Performance tuning (chips, modules, etc.), exhaust modifications (cat-back, headers, etc.), cold air intakes, and ignition systems. Order the model designed to fit your needs.
( 239 )
$187.46
Denso remanufactured starters are subjected to a rigorous test and replacement routine that produces the lowest return rates in the replacement aftermarket. And every starter is exactingly bench-tested to ensure factory-original performance. Remanufactured components offer tremendous value, and by recycling valuable parts and precious raw materials, they're the environmentally responsible choice as well. Denso First Time Fit remanufactured starters are the ideal choice. Key features and benefits of Denso remanufactured starters include: * Solenoid coil 100 percent voltage tested. * All terminal bolts replated or replaced with copper to ensure a clean source of electrical current * Commutator polished, gauged, and performance tested * Housing re-tapped to OE standards and damage-checked for heat warping, corrosion, or improper surface alignment; then refinished * Pinion gear inspected and replaced as needed to meet engineering specifications * Field coil inspected and high-voltage tested * Armature cleaned and high-voltage tested to ensure reliable performance * All-new bearings, brushes, and seals * Maximum cranking torque under all conditions * Designed to start in extreme cold and hot weather conditions
( 22 )
$168.99
—
$216.99
Summit Bucks
Delphi mass airflow sensors are the OE parts that your vehicle should have come with! Their MAF sensors are new, not remanufactured, and feature fast response for outstanding performance over a wide range of ambient temperatures. Delphi mass airflow sensors are engineered to provide your ECM with continuous, precise information to ensure optimal performance, fuel economy, and reduced emissions. Give your vehicle new life--replace worn OE parts with Delphi mass airflow sensors.
( 99 )
$129.99
Denso camshaft positioning sensors detect camshaft rotation during the engine-combustion cycle. Denso produces both magnetic resistant element (MRE) type and magnetic pick-up (MPU) type sensors. Features and benefits of Denso camshaft positioning sensors include: * Denso MRE sensors have a pair of MREs on an integrated circuit (IC) chip; this unique design is extremely accurate, even just after an engine is started * The molded IC chip is installed inside a cylindrical magnet so it is positioned closer to the gears that rotate with the camshaft--this design is almost 10 times more sensitive than Hall element type sensors * Denso uses a polyphenylene sulfide resin coating over the molded IC chip and cylindrical magnet for greater strength and superior resistance to substances like fuel, engine oil, and emission byproducts
Not Yet Reviewed
$107.99
Interstate Mega-Tron Plus automotive batteries are designed to meet or exceed OEM vehicle requirements for cold-cranking amps. They have removable caps to add water, extending the life of the batteries. Available in a variety of group sizes, Interstate Mega-Tron Plus automotive batteries will help you fire up your engine, time and time again, with no trouble.
( 38 )
$190.99
—
$229.99
Interstate Mega-Tron II automotive batteries are designed to keep your vehicle starting, day after day. They feature removable caps to add water, extending the life of the batteries. Available in a variety of group sizes, Interstate Mega-Tron II automotive batteries are an excellent replacement for your dead battery.
( 47 )
$177.99
Standard Motor Products offers a full line of these replacement switches for your power windows. You can count on Standard Motor Products for the replacement parts that you need.
( 38 )
$162.99
—
$198.99
The variable valve timing solenoid alters the supply of oil pressure to the camshaft depending on the engine's speed and load and can either advance or retard cam position, which provides several benefits, including improved engine operation increased engine power, reduced fuel consumption, and decreased emissions. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts variable valve timing solenoids offer superior coverage for domestic and import applications. Order the model designed to fit your application needs.
( 1 )
$129.99
—
$257.99
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 102 )
$173.99
—
$231.99
Summit Bucks
Delphi engine crankshaft position sensors exceed OE requirements and undergo certified electrical testing. They feature enhanced sensing functionality that delivers reduced emission, improved reliability, and superior drivability. Delphi engine crankshaft position sensors are not impacted by temperature changes and provide robust, long-lasting sensor protection. Choose Delphi for the OE replacement parts that your car was born with.
( 16 )
$116.99
Does your fan only work at one speed? Four Seasons blower motor resistors will restore the control to regulate motor speed for perfect comfort in your car. Four Seasons resistor blocks are economical, quality-made components that are built to last. Replacing your blower motor resistors is fairly easy. Take command of your car's fan speed and your wallet with Four Seasons blower motor resistors.
( 8 )
$118.99
Standard Motor accelerator pedal sensors indicate the position of the accelerator pedal by converting pedal movement and position into electrical signals. These sensors are direct replacements for the factory components.
( 49 )
$100.99
Standard Motor offers stock replacement electrical switches for dozens and dozens of functions on your vehicle. Over 700 models are available. These switches feature copper alloy conductors to ensure superior electrical conductivity with low resistive losses. They are 100 percent tested to verify both mechanical and electrical switching performance. Their robust design and high-grade materials meet the stringent demands of today's vehicles and service professionals. The switches meet or exceed OEM specifications for accurate, maintenance-free operation. Don't take chances with aging or questionable electrical switches that can leave you stranded. Order the correct replacements from Standard Motor.
( 2 )
$128.99
Weather forecasts change daily, but your vehicle is still one place where you can control the climate. And that's why Dorman blower motor resistors are so important. The easy-to-install devices control the electric current to the fan motor, keeping your heating and air conditioning system at peak performance, no matter the speed. Their long-lasting design resists thermal fuse failure, overheating, and burnout. These components are available for fitment in a wide range of cars, trucks, and vans.
( 21 )
$136.99
Summit Bucks
Delphi oxygen sensors will help you get your car up and running in no time. The engineers at Delphi designed these oxygen sensors to use OEM connectors and threads for easy installation in your car. Their unique sensor coating resists contamination to create oxygen sensors that are long-lasting and reliable. Whether you are replacing your exhaust and just want a new sensor or are replacing a worn-out unit, these Delphi oxygen sensors are for you.
( 44 )
$229.99
Don't take chances with an old, questionable, or malfunctioning ignition lock cylinder that can leave you stranded. Standard Motor Products replacement ignition lock cylinders and keys are designed to exceed OEM specifications for reliable, maintenance-free operation. Trust your vehicle's ignition and electrical system needs to Standard Motor Products. Order the model designed for your application. (Vehicles equipped with the VATS system require that a key be made with the correct resistance; they include a cutting template that will not start the vehicle.)
( 60 )
$235.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
