Availability
ACT heavy-duty clutch kits offer a clamp load increase of 20 to 50 percent over OEM, significantly increasing torque capacity. The pedal feel with these clutches varies from stock to a moderate increase. Available for street and race applications, many are SFI-certified to ensure safety.
( 87 )
$406.99
—
$1,155.00
Hybrid Racing K-Swap clutch release system upgrades help to eliminate grinds during hard shifts and improve the feel of gear changes. Factory clutch master cylinders in newer cars are known to be rather unreliable, and because of their poor design and quality, they can lead to premature failures of critical parts throughout the drivetrain. High rpm grinds are mostly attributed to the OE master cylinder's inability to transfer fluid effectively to the slave cylinder, thus causing grinding and rasping of the gears and synchro since the clutch disc hasn't fully disengaged. Upgrading the clutch master cylinder and clutch line to Hybrid Racing K-Swap clutch release systems changes the system to an older, more direct, and efficient system. This improvement allows the driver to feel a more consistent and direct clutch pedal which also improves shifting at high rpms. These kits are intended to replace all of the clutch release components which will give you the most direct and reliable clutch pedal feel. Features and kit contents: * Genuine Honda® parts--not reproductions * OEM Nissin EM1 clutch master cylinder * Stainless steel braided clutch line * Banjo fittings with washers * OEM NISSIN slave cylinder (non-dampened)
Not Yet Reviewed
$266.94
Timken wheel bearings are designed to be exact replacements for your OEM wheel bearings. Their steel roller bearing configuration allows for maximum performance without sacrificing durability. Available for a variety of passenger cars, trucks, and SUVs, these Timken wheel bearings will get you back on the road in no time.
( 251 )
$11.99
—
$77.99
ACT Streetlite Xact flywheels are designed to provide significantly improved engine response and acceleration at an affordable price. Order the model designed for your vehicle application. Features: * Lighter and stronger than OE flywheels * Better drivability and durability * Recommended for street use and drag racing * Designed using the latest CAD and Finite Element Analysis software * CNC-machined and dynamically computer-balanced for smooth operation at extremely high rpm * Entire forgings are heat-treated for strength and toughness * Tight tolerances for fit, concentricity, and parallelism * Adequate material behind the friction surface for excellent heat capacity * One-piece construction for reduced failure and uniform, efficient heat transfer—no more warped inserts * Integral ring gears are induction-hardened for longer gear life and weight reduction where it matters most—eliminates gear breakage or separation * Ring gears are cut with lead-in chamfers for better starter engagement and to prevent rounding-off gear teeth * SFI-certified
( 35 )
$227.99
—
$654.00
Action Clutch heavy-duty OE spec replacement flywheels are direct replacements with no additional add-ons. Direct plug-and-play components, these original fitting flywheels are manufactured from high-quality OE materials and offer a direct fit for your old, beat up one. If you are doing a clutch replacement, select an Action Clutch OE replacement flywheel, instead of spending money to resurface your old used flywheel. Select the one needed for your car.
Not Yet Reviewed
$178.46
Hybrid Racing offers short shifter assemblies for a variety of applications, including many Honda© and Acura© models from 1988 and up. These economical units feature an unparalleled level of adjustability so drivers can tweak every aspect of the shifter to suit their own preference. The shifters' frame is constructed from TIG-welded, powdercoated, 1000 Series steel. The anodized upper and lower rocker assemblies are now made of single pieces of aerospace-grade aluminum, with custom sealed ball bearings to reduce friction. The new V2 shifter, for instance, is 60 percent smoother than the original version, requiring much less physical effort to row through gears all while being significantly lighter. Shift throw adjustment is achieved using two threaded cable attachment pins, meaning fine tweaks can be made to shift throw, allowing you to dial in the exact throw that suits your shifting style. Each attachment pin features a wear-resistant Delrin© pivot cap for sturdy, quiet operation. New dual, zinc-plated extension springs replace the OEM-style torsion centering spring for better-centering action and a more direct feel. The front/back throw and left/right throw can be adjusted independently; and most models include shift knob height adjustment. Simple single-bolt height adjustment design (borrowed from the popular K-swap shifters) allows the knob to be adjusted higher or lower than stock (within a 1.5 in. total range) with only a 5mm Allen wrench. Now you can tweak the shifter's throw AND knob position independently until the shifter functions exactly the way you want it to. Enjoy smooth, precise, and direct shifts with a new short shifter assembly from Hybrid Racing!
Not Yet Reviewed
$306.84
—
$408.49
Hybrid Racing offers shifter cables for a variety of applications, including many Honda© and Acura© models from 1988 and up. They're a performance upgrade replacement for OEM cables. The solid rod ends, 30 percent thicker cable core, and spherical bearings give these cables a firmer, tighter feel over stock cables, resulting in fewer missed shifts and a more connected feel to the chassis. Hybrid cables deliver peace of mind and improved driving performance—even when shifting hard or during demanding racing scenarios. Other notable features of the Hybrid Racing cables are spherical bearings, stainless steel push rods, and upgraded stainless steel swivel support tubes (OEM are plastic) that are known to break on the factory cables. All of the rod ends and mounting bushings are CNC-machined 6061 aluminum that have been heat-treated and hard-anodized black before being laser-etched with the Hybrid Racing logo and flair. Aside from two shifter cables, each set includes four cotter pins, and an "m" bracket for affixing the shifter cables to the chassis in K-swap applications. If you're mounting these into an RSX, this bracket will not be needed. In addition, all shifter cables sets come with upgraded transmission gear selector springs. These aren't required but are recommended.
Not Yet Reviewed
$378.09
Exedy OE clutch kits provide the correct fit and function to restore stock power levels. Most replacement clutch kits include pressure plate assembly, clutch disc, release bearing, pilot bearing or bushing, alignment tool, lubricating grease and general installation notes. Robotic testing, special heat-treating, and the use of their own friction materials ensure optimum pedal feel, better drivability, durability, and smooth engagement, so you can enjoy your ride more. Exedy OE clutch kits offer coverage for a wide range of vehicles. Choose the kit designed for your vehicle.
( 9 )
$105.24
—
$261.80
Action Clutch flywheels are designed and tested to ensure the best quality and performance. They are SFI certified, which meets the top performance standards in the automotive and motorsports industries. Engineered for street and race applications, Action Clutch chromoly flywheels offer three major benefits: Low weight, low inertia, and high thermal capacity. Made from durable one-piece billet chromoly steel or chromoly steel forgings, they are specifically made for light- to high-tuned racing cars that see drag racing, drifting, autocross, street use, and rally events, and specifically designed for a reduction in weight and inertia for better engine response. Each flywheel has gone through—and passed--engineering tests up to 15,000 to18,000 rpms, and are heat treated for extreme durability, saving you money by resurfacing multiple times.
Not Yet Reviewed
$255.26
—
$361.25
Hybrid Racing offers V2 short shifter assemblies for a variety of applications, including 2002-05 Honda© Civics. The shifters' frame is constructed from TIG-welded, powdercoated, 1000 Series steel. The upper, lower, and side rocker assemblies are made from a single piece of 6061 aluminum—and feature custom sealed ball bearings to reduce friction and require less physical effort to row through gears. Shift throw adjustment is achieved using two threaded cable attachment pins, allowing you to dial in the exact throw that suits your shifting style. Each attachment pin features a wear-resistant Delrin© pivot cap for sturdy, quiet operation. The new V2 design uses a heavy-duty internal spring, replacing the torsion centering spring for better-centering action and a more direct feel. The lower pivot ball is now made of stainless steel which sits inside of a durable Delrin© cup. The side pivot arm now comes with a heavy-duty stainless spherical bearing for increased performance and smoothness. The front/back throw and left/right throw can be adjusted independently. At the highest setting, you can expect a 20 percent reduction in throw, and at the lowest setting up to a 50 percent reduction in throw. With their superior construction, adjustability, and unmatched testing and performance, Hybrid Racing's new V2 shifter takes the best shifter one step further!
Not Yet Reviewed
$408.49
Action Clutch flywheels are designed and tested to ensure the best quality and performance. They are SFI certified, which meets the top performance standards in the automotive and motorsports industries. Engineered for street and light racing, Action Clutch aluminum flywheels are precision machined from the highest quality billet aluminum forgings to strict tolerances for optimum performance and reliability. They deliver optimum tensile strength, heat dissipation, and weight reduction, yet not too light to prevent poor idle and driving issues. They are designed to improve throttle response, quicker shifting, and reduce clutch wear, depending on your drivability. All Action Clutch aluminum flywheels are balanced and thoroughly inspected for quality and fitment. Select the one needed for your vehicle.
Not Yet Reviewed
$267.71
—
$382.46
Hybrid Racing offers A2 K-Series Swap bolt-in short shifters for a variety of applications, including many Honda© and Acura© models from 1988 and up. In 2008 Hybrid engineers set out to solve one of the largest headaches that K-Series swaps presented—What do you do about the OEM RSX plastic shifter? After a few months of designing and prototyping, they created the very first Bolt-In K-Series swap shifter. The Hybrid Racing Bolt-In K-Swap shifters allow you to retain the stock center console in your EF, EG, EK, and DC chassis and only require drilling two small holes. They work with both stock DC5 shifter cables and the Hybrid Racing race cables. From California to England to Japan, racers all around the world choose Hybrid shifters not only for their reliability but for ease of installation and adjustability. The front/back throw can be adjusted to three different settings (100 percent stock throw, 75 percent stock throw, and 50 percent stock throw). The left/right throw can also be adjusted to three different settings (again, 100 percent stock throw, 75 percent stock throw, and 50 percent stock throw). The shift knob can be adjusted to up to 3 in. vertically, and the aluminum offset block can be rotated 360 degrees. They accept M10 x 1.5 shift knobs.
Not Yet Reviewed
$408.49
Hybrid Racing offers Z3 K-Series swap bolt-in short shifters for a variety of applications, including many Honda© and Acura© models from 1988 and up. In 2008 Hybrid engineers set out to solve one of the largest headaches that K-Series swaps presented—What do you do about the OEM RSX plastic shifter? After a few months of designing and prototyping, Hybrid created the very first bolt-in K-Series swap shifter. Nearly 10 years and thousands of shifters later, Hybrid Racing presents the latest evolution of its innovative design. The bolt-in K-Swap shifter allows you to retain the stock center console in your EF, EG, EK, and DC chassis and only requires two small holes to be drilled. It works with OEM Honda 06-11 shifter cables and the Hybrid Racing race cables. From California to England to Japan, racers all around the world choose K-Swap shifters not only for their reliability but for ease of install and adjustability. The front/back throw can be adjusted to two different settings (75 percent stock throw, and 40 percent stock throw). The left/right throw can also be adjusted to two different settings (again, 75 percent stock throw, and 40 percent stock throw). Shift knobs can be adjusted to up to two inches vertically, and the aluminum offset block can be rotated 360 degrees. In the box: * (1) Bolt-in shifter * (2) Small cotter pins * (1) Cable stay bracket * (1) Hardware pack * 7 flat washers, 3 small, 4 large * 7 Allen head bolts, 3 small, 4 large
Not Yet Reviewed
$408.49
Summit Bucks
Competition Clutch steel flywheels are made of 4140 forged steel and are one-piece designs, which helps significantly in reducing the chances of ring gear separation and friction surface warpage. Forged steel flywheels work with all performance and stock clutch assemblies, and can be resurfaced. Competition Clutch lightweight steel flywheels are recommended for naturally aspirated and/or street driven applications. They preserve low-end torque and drivability, and are well suited for Gravity, Stage 1, and Stage 2 clutch applications.
Not Yet Reviewed
$225.00
—
$450.00
Hybrid Racing clutch master cylinder upgrades create a more direct, efficient system, resulting in increased pedal feedback and consistency at higher engine speeds and load, which may also improve shifting at high rpms. Kits vary slightly according to the vehicle, but each kit delivers an OEM-quality master cylinder (CMC), along with stainless steel braided clutch line and hardware. Some kits also include slave cylinder, banjo fittings with washers, seals, and grease. Select the kit designed for use on your Honda® or Acura®.
Not Yet Reviewed
$266.94
ACT Prolite Xact flywheels provide a quicker throttle response and improved acceleration. They're CAD-designed, CNC-machined, and computer-balanced for quality and precision. The manufacturing process includes chromoly forgings with induction-hardened integral ring gears for maximum life. Prolite Xact flywheels are stronger and more durable than billet steel, aluminum, or cast iron! Dozens of models are available—order the one designed for your vehicle. More product features include: * Smooth operation at all RPMs * Optimal mass distribution * Lead-in chamfers * Heat-treated and tempered
( 42 )
$257.00
—
$388.00
ATP automatic transmission inline filter kits will keep your transmission fluid clean. Foreign particles can cause premature transmission wear. These quality inline filters will do the job and are easy to install. Kits include hoses, clamps, and instructions. Sift out the bad and keep your transmission happy with inline filters from ATP.
( 12 )
$25.79
Summit Bucks
Competition Clutch offers stock clutch kits for a variety of applications, including select Mazda, Subaru, Toyota, Lexus, Pontiac, Mitsubishi, Infiniti, Nissan, Honda©, and Acura© models from 1985 and up. These OE-style clutch replacements are the economical solution for cars that are stock or have basic bolt-ons. They provide a stock torque capacity rating and maintain stock pedal feel. Break-In Procedure: After you install your new Competition Clutch, you'll want to make sure that the clutch is properly broken in for ultimate operation. To break in your clutch, shift as often as possible during the first 500 miles, by doing so you'll ensure that the material from the disc is embedded into the friction surfaces of the pressure plate and flywheel. Following the break-in procedure will deliver the longest possible clutch lifespan.
Not Yet Reviewed
$195.00
—
$199.99
These National Bearing wheel bearings are designed for use with your OEM or aftermarket brake rotors. Their steel roller bearing configuration allows for maximum performance without sacrificing durability.
( 23 )
$9.99
—
$48.99
Action Clutch single disc clutch kits contain a range of street to high performance clutch systems built using American materials which are all locally sourced as it has been done for 60 years. Action Clutch staged kits come complete with the clutch disc, pressure plate, throwout/release bearing, pilot bearing/bushing (when applicable), and alignment tool. Action Clutch Stage 1 clutch kits for street and occasional track use offer a 70 percent increased holding capacity. They utilize reinforced steel-backed copper Kevlar® organic friction material and feature a single diaphragm heavy-duty pressure plate, while maintaining an OEM-like pedal feel and a smooth engagement. These kits are engineered for vehicles that range from stock to basic bolt-on cars, and like all Action Clutch sprung kits, the Stage 1s feature fully enclosed spring retainers to help protect your investment from any springs popping out which can cause catastrophic damage to your transmission or engine. After assembly, each kit goes through multiple quality checks to ensure quality. Select the kit designed for your vehicle. Pressure plate and clutch disc features: * All clutch covers feature ductile iron friction plate * Reinforced heavy-duty drive straps * 4-stage, heat-treated diaphragm spring * 100 percent dynamically spin balanced * American grade rivets * Full enclosed spring retainers * Sprung hub for easy engagement
( 1 )
$276.21
—
$811.71
SPEC Stage 1 clutch kits are designed for street, drag race, drifting, road race, rally, pulling, and autocross use. They feature integrally molded carbon-Kevlar® based, high performance organic linings that offer smooth engagement and excellent life. These linings have an integrally bonded steel backing for strength under high clamp loads and temperatures. Hubs are double-sprung with spring cover reliefs for flexibility and heat-treated components for strength and durability. Nearly a thousand different kits are available for countless applications, from the 1940s and up. Additional features of SPEC Stage 1 clutch kits: * High-clamp pressure plate * Steel-backed and multi-compound woven organic material * High-torque sprung hub and disc assembly * Best for street and many track and off-road applications
( 18 )
$287.10
—
$800.10
ACT race clutch discs are available in three distinct styles--choose the options that best suit your application. Spring-centered discs are the most popular and feature reduced driveline shock and spline wear with quieter operation. Rigid-hub versions offer improved durability but increase gear noise and spline wear. For either of those hub designs, you can choose six pads for better heat management and engagement, or four pads for the quickest shifting. Sintered iron discs offer the highest torque capacity and ultra-high heat capacity. They're designed for cars using clutch-less shifting or drag racing transmissions. Additional product details: * Premium ceramic friction materials provide high-heat tolerance, high coefficient of friction, and low wear rates * Carefully broached splines provide exact fit onto the transmission input shaft for long spline life and better clutch release * Heavy-duty torsional dampening springs are provided in the best sizes and spring rates to help reduce noise * Drive plates are made of high-carbon steel; heat-treated and black zinc coated to resist bending, cracking, fatigue, and rusting * Certified to SFI specifications
( 21 )
$140.00
—
$197.00
ACT Xtreme clutch kits pave the road to high performance by meshing solid products, outstanding quality, and exceptional value. These Xtreme clutch kits with racing or street discs are based on solid engineering principles. They afford a clamp load increase of 50 to 100 percent with moderate-to-stiff pedal feel, and many of these new (not rebuilt) units are SFI-certified to ensure safety. You've spent long hours building your engine; now put it in motion with the smooth, precise feel and longer life of an ACT Xtreme clutch kit.
( 16 )
$475.00
—
$922.99
Action Clutch single disc clutch kits contain a range of street to high performance clutch systems built using American materials which are all locally sourced as it has been done for 60 years. Action Clutch staged kits come complete with the clutch disc, pressure plate, throwout/release bearing, pilot bearing/bushing (when applicable), and alignment tool. Action Clutch Stage 2 clutch kits for street and occasional track use offer a 110 percent increased holding capacity. They utilize reinforced steel-backed full face Kevlar® friction material and feature a single diaphragm heavy-duty pressure plate, while maintaining an OEM-like pedal feel, super smooth engagement, and heat dissipation. These kits are engineered for vehicles that have basic bolt-on cars or NA vehicles with headwork, such as cams, very low boost or nitrous setup. These fibers have a low static to dynamic friction coefficient, making them an ideal choice for applications where smooth engagement is essential (e.g. daily driving, stop-and-go, off-road driving). Due to the properties of Kevlar®, the stage 2 kits have an exceptional lifespan with minimal increase in pedal feel and a more confidence inspiring engagement. Select the kit designed for your vehicle. Pressure plate and clutch disc features: * All clutch covers feature ductile iron friction plate * Reinforced heavy-duty drive straps * 4-stage, heat-treated diaphragm spring * 100 percent dynamically spin balanced * American grade rivets * Full enclosed spring retainers * Sprung hub for easy engagement <a href="https://static.summitracing.com/global/images/technicalarticles/anh-acr-0453.pdf" target="_blank" rel="noopener noreferrer"> Technical info from the manufacturer </a>
Not Yet Reviewed
$379.06
—
$875.46
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
