Availability
Showing In Stock Items. Show All 77 Items.
Summit Bucks
ACDelco Gold tensioner pulleys are high-quality aftermarket replacements for many vehicles on the road today. These components are built from premium materials and will exceed your expectations for fit and performance. Order the model recommended for your vehicle.
( 1 )
$25.99
Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications. pMaxKote provides: * Superior seizure resistance * Superior cavitation resistance * Superior wear resistance * Superior protection against oil starvation
( 10 )
$51.99
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 8 )
$46.99
—
$51.99
Built for passenger cars and light-duty trucks, Dayco Poly Rib serpentine belts are engineered for the high-mileage, demanding drives found in today's vehicles. Dayco's W Profile serpentine belts are the most innovative advancement in serpentine belt design in years. Developed through extensive laboratory and actual road testing, these unique rib profile EPDM belts have been engineered to conform to high-mileage, worn, or misaligned drives and to help eliminate noisy belt conditions. Constructed with aramid-reinforced EPDM compounds that resist cracking and perform better in extreme temperature ranges, Dayco Poly Rib serpentine belts deliver more than just OE-required quality. They deliver the solution to troublesome drive problems.
( 183 )
$24.99
—
$28.99
Clearance
Continental OE Technology Series Multi-V belts are factory-style replacements covering virtually all vehicle applications. These new straight-ribbed multi-V belts offer original fit and function that professional technicians appreciate for their customers. The serpentine belts are constructed with advanced EPDM rubber compounds that improve durability and deliver a quieter ride. They're available in well over a hundred lengths, with rib options ranging from three to 14. Order the model recommended for your car, truck, van, SUV, or crossover.
( 326 )
$33.99
$20.99
—
$37.99
King SI-Series rod bearings are recommended for OE applications. They're designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE crankshafts. These direct replacements have an improved finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series rod bearings also feature improved oil clearance to reduce wear and increase engine life—which, in turn, lessens operating noise, vibration, and excess oil flow. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 94 )
$34.99
—
$36.99
When oil, heat, and abrasion combine to weaken most standard accessory belts, Continental OE Technology Series V-belts will still be going strong. Continental V-belts have inherited tough construction characteristics: EPDM rubber compounds, high-strength Vytacord tension members, fiber reinforced helical cogs, and high-traction rubber edges. These features provide higher heat and abrasion resistance, no-slip contact with pulley grooves, a great fit, and improved flexibility—to deliver consistent, efficient performance, mile after mile. Belts wear and need replaced; get more for your buck with longer-lasting Continental OE Technology Series V-belts, available for a wide range of vehicle-specific applications.
( 50 )
$21.99
—
$29.99
Take up the slack with Dayco No Slack Tensioner pulleys. These specially formulated glass-filled polymer or steel-bodied pulleys have smoother surfaces and tighter dimensional tolerances for less vibration and longer belt life. They meet or exceed OEM specifications and feature lifetime lubricated bearings and high-temperature seals to ensure peak bearing performance. Maximum structural integrity and optimal performance mean Dayco value for you. Keep your belts from slacking off with Dayco No Slack Tensioner pulleys.
( 20 )
$23.99
Clearance
Whether it's a car, truck, motorcycle, marine, or performance racing application—properly sealing the piston to the engine block is a requirement. Hastings premium ductile ring sets do just that, and they're offered in many different options to fit virtually any piston. If the engine you're working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. These premium ductile piston ring sets are great for rebuilds or new builds, daily drivers or performance vehicles. Order the sizes needed for your project.
( 136 )
$51.99
$30.99
—
$54.99
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 68 )
$54.99
Whether it's a car, truck, motorcycle, marine, or performance racing—properly sealing the piston to the engine block is a requirement. Hastings Piston ring sets do just that, while being offered in many different options to fit virtually any piston out there. If the engine your working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. Hasting piston ring sets are great for rebuilds or new builds. Hastings has been manufacturing piston rings since 1915 and they have not spent a second developing anything but piston rings. Trust the professionals at Hastings and use them on your next job.
( 118 )
$29.50
—
$46.99
Clearance
King SI-Series main bearings are recommended for OE applications. These replacement bearings are designed for aftermarket gasoline or diesel engine rebuilding—and performance engines with factory crankshafts. The bearings have an improved crankshaft finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series main bearings feature improved oil clearance to reduce wear and increase engine life, which in turn reduces operating noise, vibration, and excess oil flow. Order the bearing set designed for fitment on your make and model.
( 83 )
$43.99
—
$47.99
Standard Motor Products replacement PCV valves are emissions-control devices that route unburned crankcase blowby gases back into the intake manifold where they can be re-burned. By totally eliminating crankcase emissions, the constant recirculation of air through the crankcase helps to remove moisture, which would otherwise cause sludge to form. Standard Motor Products replacement PCV valves will extend the life of the oil and the engine.
( 52 )
$41.99
Cloyes timing belt kits are designed for replacement of worn or damaged OEM timing belts and accessories. These kits include belts, tensioners, and idler pulleys. The timing belts are made of wear-resistant fabric and high-tensile strength cord construction to resist oil and engine heat, while minimizing stretch. Cloyes offers one of the most complete lines of timing belt kits in the aftermarket; all kit components and belts are manufactured to meet or exceed OEM performance requirements. Kits are available for vehicles from the early 1970s and up; order the model recommended for your year, make, and engine application.
( 3 )
$36.99
Timing chains stretch over time and become slack. Melling timing chain tensioners will retain the efficiency of your timing chain. These quality-built steel components keep your chain under the proper tension for optimum performance in your engine. So, if your old tensioner is allowing your timing chain to "slack off," replace it with a Melling!
( 3 )
$25.99
—
$41.99
Cloyes timing belt tensioners are designed to absorb changes in the loss of timing belt tension. They provide constant tension on the timing belt during crankshaft revolution which reduces noise, prevents belt flapping, and ensures proper transmission efficiency throughout the entire service life of the belt. Keep your engine's valvetrain in perfect time; choose the Cloyes belt tensioner designed for your application. Features: * Provide the correct fit and function, providing durable long-lasting performance * CAD designed and manufactured using premium materials * Extensively tested and measured for function, fitment, and durability to ensure optimal performance
( 1 )
$22.99
—
$30.99
Continental OE Technology Series idler pulleys are produced to OE form, fit, function, and material specifications to ensure optimum performance and durability. Their plastic pulleys feature glass-reinforced thermoplastic for optimized dimensional control and running surface durability, with a molded-in ball bearing for optimal fit and long life. Steel pulleys are manufactured from precision steel stampings and e-coated for superior corrosion resistance.
( 3 )
$21.99
—
$38.99
Clearance
Over time, timing chains suffer from wear and tear that can result in timing chain stretch and timing fluctuations. Cloyes offers these replacement timing chain tensioners for a variety of applications. They're made of high-quality materials to increase your cam timing accuracy.
( 13 )
$56.99
$33.50
Cloyes timing belts provide you with a quiet, maintenance-free experience. They're crafted from wear-resistant fabric and high-tensile strength cord to resist oil and engine heat, while minimizing stretch. Built to meet or exceed OEM performance requirements, the timing belts are available in a variety of widths and tooth quantities. Order the replacement model recommended for your application.
( 1 )
$20.99
—
$26.99
Cloyes engine time chain guides/tensioners are available in a variety of materials and finishes—for more than a dozen positions. They utilize the latest in design technology, ensuring proper fit and quiet, maintenance-free performance that meets or exceeds OEM requirements. Order the model recommended for your vehicle and engine application.
( 1 )
$21.99
Continental timing belt tensioners are the highest quality, most reliable, and performance driven on the market. All Continental timing belt tensioners are designed to meet or exceed OEM specifications and stand up to the harshest automotive conditions.
Not Yet Reviewed
$35.99
Clearance
King AM-Series main bearings are recommended for street or marine applications. These crankshaft bearings have superior embeddability, which provides greater macro-particle to reduce scratching of the crank journals and tearing or weakening of the Babbitt overlays. King AM-Series main bearings feature tolerance control to within plus or minus .0001—and they're lead-free, making them environmentally-friendly and user-safe. Hundreds of performance sets are available; order the replacement bearings designed to fit your vehicle.
( 32 )
$31.99
Melling balance shaft chains are provided for most domestic and import vehicle applications. They are manufactured using the highest quality designs, materials, and workmanship. From budget to performance builds, Melling balance shaft chains offer you the coverage and choices you desire. Order the model designed to fit your vehicle application.
Not Yet Reviewed
$20.99
Continental OE Technology Series timing belts are designed to deliver precise, non-slip timing. Engineered with OE Solutions Technology and made to last, these belts are constructed with enhanced rubber compounds, reinforced with fiberglass and aramid cords. They resist shrinkage and stretching; plus, the premium polymers offer exceptional heat and abrasion resistance. The molded teeth resist deformity and offer improved rigidity to ensure a long, dependable life. Hundreds of replacement belts are available for applications from the 1970s and up.
( 5 )
$25.99
—
$33.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
