Availability
Showing In Stock Items. Show All 197 Items.
ACT heavy-duty clutch kits offer a clamp load increase of 20 to 50 percent over OEM, significantly increasing torque capacity. The pedal feel with these clutches varies from stock to a moderate increase. Available for street and race applications, many are SFI-certified to ensure safety.
( 87 )
$402.60
—
$1,141.47
Hybrid Racing K-Swap clutch release system upgrades help to eliminate grinds during hard shifts and improve the feel of gear changes. Factory clutch master cylinders in newer cars are known to be rather unreliable, and because of their poor design and quality, they can lead to premature failures of critical parts throughout the drivetrain. High rpm grinds are mostly attributed to the OE master cylinder's inability to transfer fluid effectively to the slave cylinder, thus causing grinding and rasping of the gears and synchro since the clutch disc hasn't fully disengaged. Upgrading the clutch master cylinder and clutch line to Hybrid Racing K-Swap clutch release systems changes the system to an older, more direct, and efficient system. This improvement allows the driver to feel a more consistent and direct clutch pedal which also improves shifting at high rpms. These kits are intended to replace all of the clutch release components which will give you the most direct and reliable clutch pedal feel. Features and kit contents: * Genuine Honda® parts--not reproductions * OEM Nissin EM1 clutch master cylinder * Stainless steel braided clutch line * Banjo fittings with washers * OEM NISSIN slave cylinder (non-dampened)
Not Yet Reviewed
$266.94
Action Clutch single disc clutch kits contain a range of street to high performance clutch systems built using American materials which are all locally sourced as it has been done for 60 years. Action Clutch staged kits come complete with the clutch disc, pressure plate, throwout/release bearing, pilot bearing/bushing (when applicable), and alignment tool. Action Clutch Stage 2 clutch kits for street and occasional track use offer a 110 percent increased holding capacity. They utilize reinforced steel-backed full face Kevlar® friction material and feature a single diaphragm heavy-duty pressure plate, while maintaining an OEM-like pedal feel, super smooth engagement, and heat dissipation. These kits are engineered for vehicles that have basic bolt-on cars or NA vehicles with headwork, such as cams, very low boost or nitrous setup. These fibers have a low static to dynamic friction coefficient, making them an ideal choice for applications where smooth engagement is essential (e.g. daily driving, stop-and-go, off-road driving). Due to the properties of Kevlar®, the stage 2 kits have an exceptional lifespan with minimal increase in pedal feel and a more confidence inspiring engagement. Select the kit designed for your vehicle. Pressure plate and clutch disc features: * All clutch covers feature ductile iron friction plate * Reinforced heavy-duty drive straps * 4-stage, heat-treated diaphragm spring * 100 percent dynamically spin balanced * American grade rivets * Full enclosed spring retainers * Sprung hub for easy engagement
Not Yet Reviewed
$450.46
—
$591.56
Pro Series flywheel bolts from ARP give you all that you need to bolt in your flywheel with confidence. They're much stronger than OEM hardware, forged from aerospace alloy, and are heat-treated prior to thread rolling and machining. These bolts feature an exclusive, flat 12-point head design and a larger-than-stock shank diameter for increased strength and improved flywheel register.
( 364 )
$38.99
—
$57.99
Action Clutch heavy-duty OE spec replacement flywheels are direct replacements with no additional add-ons. Direct plug-and-play components, these original fitting flywheels are manufactured from high-quality OE materials and offer a direct fit for your old, beat up one. If you are doing a clutch replacement, select an Action Clutch OE replacement flywheel, instead of spending money to resurface your old used flywheel. Select the one needed for your car.
Not Yet Reviewed
$178.46
Exedy OE clutch kits provide the correct fit and function to restore stock power levels. Most replacement clutch kits include pressure plate assembly, clutch disc, release bearing, pilot bearing or bushing, alignment tool, lubricating grease and general installation notes. Robotic testing, special heat-treating, and the use of their own friction materials ensure optimum pedal feel, better drivability, durability, and smooth engagement, so you can enjoy your ride more. Exedy OE clutch kits offer coverage for a wide range of vehicles. Choose the kit designed for your vehicle.
( 10 )
$105.24
—
$444.65
ACT Streetlite Xact flywheels are designed to provide significantly improved engine response and acceleration at an affordable price. Order the model designed for your vehicle application. Features: * Lighter and stronger than OE flywheels * Better drivability and durability * Recommended for street use and drag racing * Designed using the latest CAD and Finite Element Analysis software * CNC-machined and dynamically computer-balanced for smooth operation at extremely high rpm * Entire forgings are heat-treated for strength and toughness * Tight tolerances for fit, concentricity, and parallelism * Adequate material behind the friction surface for excellent heat capacity * One-piece construction for reduced failure and uniform, efficient heat transfer—no more warped inserts * Integral ring gears are induction-hardened for longer gear life and weight reduction where it matters most—eliminates gear breakage or separation * Ring gears are cut with lead-in chamfers for better starter engagement and to prevent rounding-off gear teeth * SFI-certified
( 35 )
$227.99
—
$654.00
Action Clutch flywheels are designed and tested to ensure the best quality and performance. They are SFI certified, which meets the top performance standards in the automotive and motorsports industries. Engineered for street and light racing, Action Clutch aluminum flywheels are precision machined from the highest quality billet aluminum forgings to strict tolerances for optimum performance and reliability. They deliver optimum tensile strength, heat dissipation, and weight reduction, yet not too light to prevent poor idle and driving issues. They are designed to improve throttle response, quicker shifting, and reduce clutch wear, depending on your drivability. All Action Clutch aluminum flywheels are balanced and thoroughly inspected for quality and fitment. Select the one needed for your vehicle.
Not Yet Reviewed
$267.71
—
$382.46
Action Clutch single disc clutch kits contain a range of street to high performance clutch systems built using American materials which are all locally sourced as it has been done for 60 years. Action Clutch staged kits come complete with the clutch disc, pressure plate, throwout/release bearing, pilot bearing/bushing (when applicable), and alignment tool. Action Clutch Stage 1 clutch kits for street and occasional track use offer a 70 percent increased holding capacity. They utilize reinforced steel-backed copper Kevlar® organic friction material and feature a single diaphragm heavy-duty pressure plate, while maintaining an OEM-like pedal feel and a smooth engagement. These kits are engineered for vehicles that range from stock to basic bolt-on cars, and like all Action Clutch sprung kits, the Stage 1s feature fully enclosed spring retainers to help protect your investment from any springs popping out which can cause catastrophic damage to your transmission or engine. After assembly, each kit goes through multiple quality checks to ensure quality. Select the kit designed for your vehicle. Pressure plate and clutch disc features: * All clutch covers feature ductile iron friction plate * Reinforced heavy-duty drive straps * 4-stage, heat-treated diaphragm spring * 100 percent dynamically spin balanced * American grade rivets * Full enclosed spring retainers * Sprung hub for easy engagement
( 1 )
$361.21
—
$518.46
Action Clutch flywheels are designed and tested to ensure the best quality and performance. They are SFI certified, which meets the top performance standards in the automotive and motorsports industries. Engineered for street and race applications, Action Clutch chromoly flywheels offer three major benefits: Low weight, low inertia, and high thermal capacity. Made from durable one-piece billet chromoly steel or chromoly steel forgings, they are specifically made for light- to high-tuned racing cars that see drag racing, drifting, autocross, street use, and rally events, and specifically designed for a reduction in weight and inertia for better engine response. Each flywheel has gone through—and passed--engineering tests up to 15,000 to18,000 rpms, and are heat treated for extreme durability, saving you money by resurfacing multiple times.
Not Yet Reviewed
$255.26
—
$361.25
These National Bearing automatic transmission selector shaft seals are designed to keep your transmission sealed up properly. They are manufactured from durable steel and have a rubber insert for a leak-free seal. The selector shaft seals are available to fit most automatic transmission models.
( 3 )
$6.99
Summit Bucks
Competition Clutch steel flywheels are made of 4140 forged steel and are one-piece designs, which helps significantly in reducing the chances of ring gear separation and friction surface warpage. Forged steel flywheels work with all performance and stock clutch assemblies, and can be resurfaced. Competition Clutch lightweight steel flywheels are recommended for naturally aspirated and/or street driven applications. They preserve low-end torque and drivability, and are well suited for Gravity, Stage 1, and Stage 2 clutch applications.
Not Yet Reviewed
$225.00
—
$350.00
Dura-Bond automatic transmission bushings are available in a wide range of offerings covering the aftermarket and today's needs for improved quality and tolerances. Individual bushings and kits are available, as well as semi-finished options that allow you to machine bore for proper fit and centerline accuracy. Dura-Bond transmission bushings feature seamless construction that makes installation easy, eliminating breakage and bushing surface interruptions. * Full round Babbitt bushings: Tight tolerances, no walking, no possible split when installing, wall tolerance of .0005 and O.D. tolerance of .001 * Bronze bushings: Hard and strong, long lifespans; resist shock, impact, wear, and corrosion * Coated bushings: Retains transmission engine oil on the surface, even under extreme heat and pressure, providing secondary lubrication in the event of momentary oil starvation * Dry film lubricant coating: Provides solid lubrication of parts subject to torque or contact stresses for maximum fatigue life, improved surface properties, excellent load carrying capacity, and intermittent dry lubrication * Bushings with indents: Provide lubricant reservoirs for better oil retention that allows for excellent and prolonged service * Bushing kits are constructed with all the necessary bushings to complete a rebuild and are manufactured to precise OEM dimensions for an exact fit
( 10 )
$3.99
—
$19.99
The importance of pressure plate bolts in a racing or high performance street applications cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application-specific to ensure the optimum grip length. ARP High Performance Series bolts are made from a premium-grade chromoly and hardened to a nominal tensile strength of 180,000 psi. Choose the thread size needed for your make and model.
( 236 )
$18.99
—
$22.99
ACT Sport clutch kits optimize the road to high performance by meshing solid products, outstanding quality, and exceptional value. They're crafted from CNC-machined parts and computer-balanced with no loose pieces to wear out or rattle for quiet, trouble-free operation. These Sport clutch kits with street discs are based on solid engineering principles, affording a clamp load increase of 20 to 40 percent with moderate pedal feel, and many of these new, not rebuilt units are SFI-certified to ensure safety. Get the power of your engine in motion with the smooth, precise feel and longer life of the ACT Sport clutch kits.
( 8 )
$357.50
—
$454.00
Exedy offers OE flywheels for a variety of applications, including many Honda©, Acura©, Subaru, Scion models from early 2000s and up. Flywheel hot spots can cause chatter—and resurfacing a flywheel doesn't always remove hot spots. The flywheel may appear fine, but the hot spots will often still be there. These stock replacements are machined from ductile iron in different sizes and configurations. They smooth the power output in reciprocating engines, store and deliver energy at higher rates than the source, and control the orientation of a mechanical system using gyroscope and reaction wheel. It's often recommended to replace both the flywheel and clutch at the same time. Order the flywheel designed for your vehicle.
( 1 )
$178.43
—
$218.71
Summit Bucks
Competition Clutch offers stock clutch kits for a variety of applications, including select Mazda, Subaru, Toyota, Lexus, Pontiac, Mitsubishi, Infiniti, Nissan, Honda©, and Acura© models from 1985 and up. These OE-style clutch replacements are the economical solution for cars that are stock or have basic bolt-ons. They provide a stock torque capacity rating and maintain stock pedal feel. Break-In Procedure: After you install your new Competition Clutch, you'll want to make sure that the clutch is properly broken in for ultimate operation. To break in your clutch, shift as often as possible during the first 500 miles, by doing so you'll ensure that the material from the disc is embedded into the friction surfaces of the pressure plate and flywheel. Following the break-in procedure will deliver the longest possible clutch lifespan.
Not Yet Reviewed
$195.00
—
$199.99
Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.
( 369 )
$105.99
—
$511.99
These Timken automatic transmission selector shaft seals are designed to keep your transmission sealed up properly. They are manufactured from durable steel and have a rubber insert for leak-free seal. The selector shaft seals are available to fit most automatic transmission models.
( 6 )
$6.99
ACT heavy-duty pressure plates feature induction-hardened diaphragms to reduce wear and promote smooth operation. They utilize stronger drive straps and rivets to strengthen the pressure plate and prevent breakage. All castings are CNC-machined for greater consistency and precision. Step up your race and street game; order the ACT heavy-duty pressure plates recommended for your vehicle. Some of their many features include: * Most popular choice * 20 to 50 percent clamp load increase * Computer spin-balanced * Stiffening ribs * Pedal feel is stock to moderate * SFI-certified * Recommended disc: Street/Race
( 10 )
$232.00
—
$445.00
ACT race clutch discs are available in three distinct styles--choose the options that best suit your application. Spring-centered discs are the most popular and feature reduced driveline shock and spline wear with quieter operation. Rigid-hub versions offer improved durability but increase gear noise and spline wear. For either of those hub designs, you can choose six pads for better heat management and engagement, or four pads for the quickest shifting. Sintered iron discs offer the highest torque capacity and ultra-high heat capacity. They're designed for cars using clutch-less shifting or drag racing transmissions. Additional product details: * Premium ceramic friction materials provide high-heat tolerance, high coefficient of friction, and low wear rates * Carefully broached splines provide exact fit onto the transmission input shaft for long spline life and better clutch release * Heavy-duty torsional dampening springs are provided in the best sizes and spring rates to help reduce noise * Drive plates are made of high-carbon steel; heat-treated and black zinc coated to resist bending, cracking, fatigue, and rusting * Certified to SFI specifications
( 21 )
$140.00
—
$197.00
Hybrid Racing clutch master cylinder upgrades create a more direct, efficient system, resulting in increased pedal feedback and consistency at higher engine speeds and load, which may also improve shifting at high rpms. Kits vary slightly according to the vehicle, but each kit delivers an OEM-quality master cylinder (CMC), along with stainless steel braided clutch line and hardware. Some kits also include slave cylinder, banjo fittings with washers, seals, and grease. Select the kit designed for use on your Honda® or Acura®.
Not Yet Reviewed
$266.94
Clutch master cylinders are vital components of manual transmission systems, controlling hydraulic pressure to engage and disengage the clutch. Exedy clutch master cylinders are quality OE replacements to restore optimal shifting and prevent clutch slippage or even a loss of power. Exedy offers many choices covering an array of vehicles. Choose the clutch master cylinder designed for your vehicle.
( 3 )
$20.33
—
$54.10
USA Standard manual transmission bearing kits include top-quality components to rebuild the bearings in your transmission. They're great for replacing worn out or broken items--even just giving your transmission a quick update, while you're down in the off-season.
( 9 )
$182.89
—
$547.89
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
