Availability
Patented ATI Super Damper standard harmonic balancers are the only crankshaft dampers designed exclusively for high performance engines. Inner and outer shells are available in aluminum or steel, and contain a steel inertia weight. The inertia weights have six (2-ring design) or eight (3-ring design) computer-machined grooves to retain the proper durometer O-rings (dyno tested for each application). Whether you race or just drive on the street, ATI harmonic balancers are the perfect choice. Features include: * Eliminates torsional crankshaft vibrations * Exceeds SFI 18.1 specs * Black zinc chromate finished * OEM equipment on a variety of crate engines * Tunable, rebuildable, and extremely efficient at all rpm * Laser-engraved 360 degree timing marks * Supercharger and power steering drive pulleys available for some applications
( 227 )
$359.90
—
$381.84
Using only three parts (a laser-welded sealed housing, an internal inertia ring, and highly viscous silicone fluid between the two), SFI-approved Fluidampr harmonic dampers can control all crankshaft vibration--not just a limited frequency range. As a result, you get reduced wear on the main bearings and timing gear, more stable valvetrain operation, and less chance of crank failure.
( 136 )
$482.92
—
$501.99
Cylinder Works 4-stroke cylinder heads typically include cam caps and bolts, C630 (nickel/aluminum/bronze) valve seats and guides. For competition valve jobs, these replacements have shortened guides to accept higher lift cams. For your off-road motorcycle rebuild, a 4-stroke cylinder head kit from Cylinder Works is the place to begin. Order the model recommended for your bike application.
( 3 )
$381.74
—
$466.58
Factory dampers and non-dampened pulleys offer no protection to high performance engines. ATI Super Damper sport compact harmonic balancers provide the balanced dampening of torsional crankshaft vibrations at all rpm levels. The street versions have both OEM serpentine groove locations and are very close to OEM size. The smooth-shell race version dampers are designed for high performance race use. Both dampers come with laser-etched timing and exceed SFI 18.1 Safety Certification standards for competition use.
( 13 )
$348.80
—
$449.12
Free your engine's horsepower on the wings of Eagle H-beam connecting rods. Their 2-piece, forged, vacuum-degassed, 4340-certified steel construction provides outstanding strength, while still weighing much less than stock rods. Each rod is multi-stage heat-treated, X-rayed, sonic-tested, magnafluxed, 100 percent machined, and then shot-peened to stress-relieve the metal. The rods have precision cap alignment sleeves to positively locate each rod cap, silicon bronze bushings for floating pin models—and are available in stroker models that allow additional cam-to-rod clearance for large stroke combinations. They come standard with 190,000 psi rated ARP 8740 and 230,000 psi rated ARP 2000 rod bolts, or 265,000 psi rated ARP L-19 bolts as upgrades. Instructions and rod bolt lubrication are included. Order the model designed for your vehicle year/make and engine application.
( 80 )
$374.99
—
$451.99
When it's time to do a rebuild, Hot Rods complete bottom end rebuild kits are less expensive and longer lasting than OEM. These kits have all that you need to get back on track and are easy to put together. Each kit contains a crankshaft, main bearing/seals, and a complete gasket set. Water pump seals are not included. Great performance parts from Hot Rods will have you going, going, strong!
( 2 )
$274.27
—
$521.85
BoostLine connecting rods are designed specifically for demanding turbocharged, supercharged, and big nitrous applications. The patented, 3-pocket body forged from premium 4340 steel incorporates the best features of both the H-beam (mass/weight) and I-beam (strength) designs. This provides 60 percent more bending strength compared to common H-beam rods. Each piece is heat-treated, shot-peened, and fitted with ARP-2000 cap screws (strong, malleable, and 220,000 psi rating) before final finish machining. Keep things straight with a set of BoostLine connecting rods (also available individually). Order the connecting rods in the model recommended for your specific engine size. Features, items, and specs: * High-quality Ampco bushing material used in the small end * Pin clearance at between 9-ten-thousandths and 11-thousandths of an inch (allows engine builder to custom set wrist pin spec, should additional clearance be necessary) * All BoostLine rods are individually inspected via a coordinate measuring machine (CMM) that is used to custom-match sets of rods to incredibly tight tolerances * Each rod includes an inspection report from the Wiseco Piston quality team * Rods are completely separated by thick foam for protection from shipping damage * Each rod is vacuum-wrapped in plastic for corrosion protection * Upgraded ARP 625+ bolts (260,000 to 280,000 psi) available
( 1 )
$294.95
—
$400.95
Hot Cams drop-in performance camshafts are one of the most economical, reliable, easy-to-install camshafts and add power gains to dirt bikes, ATVs, and UTVs. Hot Cams drop-in performance camshafts feature 8620 billet case-hardened steel and are CNC-machined for an exact fit and lobe profile. They are engineered to be drop-in cams that use stock valve springs in most cases and have multiple stages to choose from for many of the most popular applications. Stage 1 is designed for excellent bottom end, Stage 2 is designed for increased bottom to midrange performance, and Stage 3 is designed for top end performance.
( 2 )
$254.99
—
$373.99
Cloyes timing chain kits meet OE performance requirements. They utilize the latest in design and materials so you can enjoy quiet, maintenance-free performance. These assemblies are available in various styles, including link belt, single roller, and single non-roller. Order the kit designed for fitment on your specific model or engine application.
( 174 )
$481.99
—
$531.99
System 1 has eliminated the need for disposable oil filters. Built from durable anodized aluminum housing, System 1 filters feature a washable, stainless steel element that can be used over and over again. They can be completely disassembled for inspection, revealing metal shavings and residue that could indicate engine wear or damage. System 1 oil filters are perfect for daily drivers, fleet vehicles, and race and marine applications.
( 15 )
$290.00
Designed for street performance machines that see occasional strip use, these Moroso oil pans are modified with deep or kicked-out sumps for increased capacity and oil control under hard acceleration. With a simple bolt-on installation into most production chassis, these Moroso street/strip oil pans are perfect for the weekend warrior.
( 409 )
$270.99
—
$542.99
Wiseco crankshaft kits contain everything you need to complete your rebuild for a job done right, the first time! These crankshafts, connecting rods, bearings, and bottom end gaskets meet or exceed OEM specifications for the maximum horsepower and torque that every rider wants. Features include: * Double forged connecting rods feature shot peening, oil slots, and coated bronze thrust washers * Bottom end gasket kits are made from premium materials, exceeding OEM standards for an exceptional seal between critical mating surfaces * High-quality main bearings provide maximum life and smooth operation at high rpm * Surface treatment prevents corrosion and pitting, while adding strength to the assembly * Bushed top end of rod retains oil and eliminates pin galling * Case-hardened bottom end rod bores optimize bearing running surface * Hot rolled steel, case-hardened crank pin bearings * Caged needle roller bearings provide the highest possible rpm
( 2 )
$267.97
—
$530.97
Cloyes timing chain and gear sets provide the ultimate in timing reliability. They include a steel crankshaft gear and either an aluminum or ductile iron camshaft gear, along with a chain. Cloyes timing chain and gear sets have been precision-hobbed and crown-shaved to provide an accurate gear-to-gear mesh with no wear and tear on the gears.
( 6 )
$297.99
—
$359.99
Mishimoto baffled oil catch cans are designed to separate oil particles from the PCV air that would normally have just been routed back to your intake. They feature custom grooves in the catch can's inlet that turbulates the air longer and ensures that all of the oil sinks to the bottom, leaving nothing but clean air to pass through the 40 micron bronze filter to the intake. An internal baffle keeps the collected oil from splashing around under race conditions. These catch cans are machined from 100 percent billet 6061 aluminum, and accept AN fittings at the inlet, outlet, and drain area—allowing for over 27 possible configurations. For maximum fitment options, the top cog mounting setup enables the cans to be mounted from multiple angles. To make maintenance easy, the drain plug can be removed to allow for AN return to the oil pan. Mishimoto baffled oil catch cans are washable, unlike many other cans that require you to replace your filtration system, and they're available in a variety of colors. Order the model recommended to fit your vehicle, engine, and/or transmission application.
( 35 )
$269.95
Kibblewhite is dedicated to providing the best lightweight racing valve spring kits available. The folks at Kibblewhite have years of experience building the finest valvetrain products, and that experience has culminated in these lightweight valve springs. Each spring starts life as the finest quality super-clean, chrome-silicon wire that is wound to the most exacting standards. After the spring is wound, it goes through a rigidly controlled heat treatment, stress relief, and shot-peening process that ensures the longest lasting and strongest springs possible. These springs are perfect for today's high-revving motors, whether you are on the race track or the trail. Upgrade to these Kibblewhite lightweight racing valve spring kits today and stop worrying about when one of your stock springs is going to fail you.
Not Yet Reviewed
$251.48
—
$561.33
No starvation! Canton Racing road race oil pans feature their competition baffling system of trap door baffles and/or slosh baffles. These systems flow oil to the pickup compartment and then keep it from flowing or sloshing away from the pickup during turns, acceleration, and braking. Their wide, low-profile sumps deliver maximum oil capacity and ground clearance. Many pans also include provisions for an optional pan mounted dipstick and a magnetic drain plug. Feed your engine with Canton Racing road race oil pans.
( 75 )
$539.00
ICON Premium forged pistons are designed to be application specific and are made from either 4032 or 2618 aluminum. 2618 aluminum has a lower silicon content and is better suited for engine combinations with high compression or a power adder, they also offer an increased rate of thermal expansion. ICON Premium forged anodized piston and ring kits include all the features of an FHR piston, with the addition of an anodized top ring groove and crown, precision CNC-machined valve reliefs and crown features, pressure fed pin bore oiling, and skirt and pin boss struts for increased strength and durability. ICON Premium forged piston and ring kits include pistons and ring stack. Select the kit designed for your build. Additional features: * Mini grooves * CNC-machined valve reliefs and crown * Diamond CNC-turned skirts * Accumulator groove * Dual forced pin oiling * Lateral gas ports on high-compression designs * Spacer rings provided for shorter compression height pistons
Not Yet Reviewed
$520.99
Manley steel H-beam connecting rods are made from forged 4340 steel alloy. They're packed full of performance features, such as a compact uniform-grain structure for ultimate strength, full machining, stress relieving, and magnafluxing. The wrist pin and big end bores are honed to a +/-.0002 in. tolerance, and the wrist pins get a bronze alloy bushing. These units include cap screw ARP 8740 alloy rod bolts, and each rod set is weight-matched to within 2 grams. Available individually or in a set, order the model recommended for your vehicle year/make and engine application.
( 8 )
$518.00
On Sale
Clearance
VEGE Remanufactured cylinder heads are a popular choice for performance and value. With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured cylinder heads with a level of quality that equals that of new OEM products—at extremely competitive prices. The rebuilt cylinder heads are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Unless otherwise noted, the assemblies include a cast iron or aluminum cylinder head, intake and exhaust valves, valve springs, retainers, locks, stem seals, rocker arm studs, and more. Many heads include rocker arms. Nearly a thousand models are available, for fitment on countless applications.
( 39 )
$468.99
$403.50
—
$521.99
Crower Stage 3 camshafts are an excellent choice if you want more power over your stock camshaft. Available in several variations, these camshafts are a most popular profile for the street/strip, with a definite lope at idle they exhibit strong mid-range to top end toque and horsepower. When you need parts for power, you need Crower.
Not Yet Reviewed
$516.99
Eliminate the wait with Cylinder Works standard bore cylinder kits. They arrive ready to install, eliminating the hassle of sending out your cylinder for re-plating or boring, and they're competitively priced compared to typical re-plating costs. These cylinders look virtually identical to your OEM parts. Cylinder Works standard bore cylinder kits come in model-specific kits, so choose the one that best fits your application. Features include: * Super-convenient--just purchase and install * Nickel silicon carbide plated for long life * Honed to exact size for easy piston installation * Complete with gaskets, cylinder, and piston kit * No machine work required
( 2 )
$424.96
—
$543.96
Are you looking to replace a broken or worn-out crankshaft? Hot Rods crankshafts are sold with or without Hot Rods connecting rods and wrist pin bearings. These crankshafts are factory assembled and trued to OEM specifications. They avoid the additional machine work and extra parts typically required for long-stroke engines. Stroker crankshafts use stock pistons. Heavy-duty crankshafts utilize their heavy-duty connecting rods. Bolt in and go with these Hot Rods crankshafts!
Not Yet Reviewed
$263.57
—
$501.55
Better by design, Callies Compstar connecting rods offer high performance and a trouble-free engine build. Concerns about out-of-round, big-end bore sizing, repeatability, time-saving details, and upgrade costs are a thing of the past. Their forged 4340 steel rods are put through a lengthy stress-relief process and burnishing of threads and bolt spot faces to ensure dimensional repeatability, no matter how many times rods are torn down and reassembled. Pin bushings are chamfered and honed, parting line edges are generously chamfered, and bearing locating tab slots are deburred, all in an effort to save you time and trouble. ARP 2000 bolts and stroker clearances are standard with Compstar rods. Choose either their original H-beam design or heavy-duty I-beam designed rods. For high performance use right out of the box, plus value and peace of mind, try Callies Compstar connecting rods.
( 18 )
$404.00
Crower Stage 2 forced induction camshafts are designed for turbo and supercharger applications. Offering low duration and high lift, Stage 2 forced induction camshafts are capable of varying horsepower gains, depending on your engine mods. With Crower Cams' 55 years of experience, you can rest assured that they can give you the power that you desire.
( 1 )
$387.99
—
$402.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
