Availability
Showing In Stock Items. Show All 16 Items.
Antigravity Batteries Re-Start batteries have built-in jump-start and full management systems. They intelligently monitor their own voltage, and just before going completely dead, they promptly initiate sleep mode with just enough energy to get your vehicle started again. Simply press the restart button located on the battery, start your vehicle and drive away. These are extremely lightweight and high-power lithium-ion replacements for your heavy lead/acid batteries. They're available for most modern motorcycles and ATV/UTVs. No more dead battery emergencies or being stranded with Antigravity Batteries Re-Start batteries! Features and specs: * Up to 2 times the cranking power and lifecycle of heavy lead/acid batteries * Up to 70 percent lighter than heavy lead/acid batteries * Management system offers low-voltage cutoff, over-charge/over-discharge protection, lithium cell balancing, and thermal protection * 4 terminal posts for ease of use with right or left side connections and any orientation (no liquids to spill) * Capable of holding a charge for up to one year when no parasitic drains (alarms, GPS, etc.) are present * Shock and vibration resistant for durability * No acids or heavy metals for lower environmental impact
( 13 )
$354.99
—
$449.99
If you're looking for the best-selling aftermarket shocks in the USA, look no further! Progressive Suspension 412 Series shocks feature a double-walled steel body and 5-position preload adjustment--and they're gas-charged! These shocks are available for a wide variety of twin-shock motorcycles and they come fully assembled and ready to mount! Progressive Suspension 412 Series shocks will have your motorcycle riding in top-notch performance and style.
( 10 )
$277.10
—
$371.66
Daytona Twin Tec internal ignitions mount in the nose cone while replacing the factory ignition. The results are a cleaner look by having less visible wire. This is good news to the custom builder. These ignitions feature adjustable advance modes and slopes that work on stock to modified applications. Daytona Twin Tec internal ignitions are protected by a billet aluminum housing and works with your factory rotor. Other features: * Digitally set rpm limit set in 100 rpm increments * Selectable single or dual fire mode * Selectable kick start mode * Selectable multi-spark mode for quick starting and smooth cruising * Coil outputs protected against short circuit * Optional USB interface and software for custom advance programming
Not Yet Reviewed
$402.95
Now you can enlist your own creepy skeleton hands to hold your mirror heads in perfect position. The Kuryakyn Skeleton hand mirrors feature detailed arm bone stems and hands that look amazingly realistic. Their wrist joints provide smooth and sturdy mirror adjustments to help keep you aware of your surroundings. Kuryakyn Skeleton hand mirrors are available in different combinations of chrome or black hands with chrome or black mirror heads.
Not Yet Reviewed
$279.99
Dynatek 2000 digital HD1 ignition systems have become the standard for performance and versatility in aftermarket ignitions. These new modules include expanded advance curve functionality, with the option to use vacuum advance compensation. The new modules also include a special retard mode for use with turbocharged and nitrous bikes. They allow you to tailor the advance curve and rev limiter with four built-in advance curves and four independent rev limiter choices from 6,000 to 7,500 rpm and the new retard mode allows for a selection of ignition retard of 5, 7, or 10 degrees upon activation of retard input. They're stock factory pick-ups and simply plug into the existing factory wiring harness on 1991-98 model bikes. An extension harness is available for installing the Dyna 2000s on 1990 and earlier bikes.
Not Yet Reviewed
$266.99
Wiseco powersports piston kits include your rings, piston pin, and circlips. Wiseco has a decade of experience producing quality pistons for dirt bikes, ATVs, snowmobiles, outboard marine engines, and motorcycles. Their piston kits provide strong, lightweight pistons with optimized designs that improve engine efficiency and maximize your torque and throttle response. Plus, Wiseco powersports piston kits are produced right here in the USA. It's time to blaze your own trail with Wiseco powersports piston kits.
( 6 )
$292.97
—
$293.99
The Daytona Twin Tec VT-I ignition systems include a special trigger rotor for use with a traditional mechanical advance mechanism. Then, a Hall Effect sensor detects the teeth on this special trigger rotor and provides very stable spark timing. A rotary switch is used for a precise, digital RPM limiter that can be set from 5,200 to 7,000 rpm in 200 rpm increments. This system also has a red status LED that allows easy static timing. The VT-I is compatible with most original equipment and aftermarket dual fire ignition coils and has a simple 2- wire hookup to the coil. Electronic dwell control provides maximum ignition energy at high RPM—and reduced current draw at low RPM. The unit operates down to below 6 V for reliable starting under all conditions, including kick start. VT-I utilizes fully encapsulated construction with surface-mount electronics. The unit is waterproof and highly resistant to vibration and shock. Electronic components also include over-temperature protection and are rated to operate up to 260 degrees F (125 degrees C).
Not Yet Reviewed
$262.95
Your Harley® will run much better with Daytona Twin Tec Model 1005 internal ignition kits versus the older solid-state points eliminator that relied on the mechanical advance flyweights and all that. The "race mode" settings are awesome! They'll wake up your old bike. The advance curve network with adjustable advance slopes will accommodate stock to highly modified engines. You can digitally set the rpm limit, select single or dual fire mode, and multi-spark mode for quick starting and smooth cruising. An optional USB interface and software for programming custom advance curves are available.
Not Yet Reviewed
$514.95
Progressive Suspension has done it again! They have designed a masterful looking and performing shock that is feature-rich. These Progressive Suspension 430 Series shocks incorporate a high-pressure gas monotube design with deflective disk damping to ensure high performance ride control. The 430 Series can also be mounted rod-up or rod-down, depending on your application. Their threaded preload adjusters allow for tool-less adjustment and effortless tuning of ride quality. They also proudly display their machined aluminum spring perches and street rod styling. The Progressive Suspension 430 Series shocks are available in either a chrome or black anodized finish to match the look of your bike.
Not Yet Reviewed
$499.95
Modal Header