Selected Filters


Loading...

Availability


HARLEY-DAVIDSON FXSTDSE2 SCREAMIN EAGLE SOFTAIL DEUCE 2 Parts and Accessories

Part Groups

Results 1 - 24 of 28

Progressive Suspension 422 Series Shocks

The 422 Series shocks built by Progressive Suspension are fully adjustable, softail-style shocks. These shocks feature variable ride height and spring preload settings, allowing you to easily tune the suspension to your size and riding style. Progressive Suspension 422 Series shocks can be adjusted up to 2 in. lower than stock height. If you're looking for dependable, stylish, adjustable shocks, then Progressive Suspension 422 Series shocks are perfect for you!

4.75 out of 5 stars ( 4 )

$632.99

S&S Cycle Roller Rocker Arms

S&S Cycle roller rocker arms were designed for superior strength and to eliminate the failure-prone stress areas found in other rockers. These replacement arms are forged from 8620 steel, heat-treated, and then shot-peened for additional strength. They feature 3/4 in. long bronze bushings, compared to the more common 1/2 in. long bushings or needle bearings. S&S Cycle roller rocker arms are available in 1.500:1 ratio, 1.625:1 ratio and 1.725:1 ratio. Order the set recommended for your bike model.

Not Yet Reviewed

$649.95

HardDrive Coned Ram-Air Air Cleaners

Are you looking to improve your bike engine's breathing capability by installing an open element air filter? HardDrive Coned Ram-Air air cleaners are custom-made, tilt-forward air cleaners. They feature a 4.5 x 12 in. CNC billet aluminum housing available in your choice of finishes, along with high-flow air filters, and 90 degree manifolds. When you increase efficiency, power and economy also improve. Coned Ram-Air intake units are available for fitment on a wide range of Harley-Davidson® motorcycles.

Not Yet Reviewed

$580.46

Daytona Twin Tec Twin Scan II ABS Scan Tools

Daytona Twin Tec Twin Scan II ABS tools will help keep your Harley® healthy. The units will read and clear diagnostic trouble codes from your engine control module (ECM), turn signal/security module (TSM/TSSM), speedometer, tach, and anti-skid braking system (ABS). These compact, low-cost "doctors" are especially skilled in diagnosing hard-to-find, intermittent trouble codes. Twin Scan II ABS scan tools also have brake bleeding capabilities and built-in data logging. Your motorcycle can be operated while the units are installed, and under normal conditions (no trouble codes), the units will store data for the last hour of operation. If a trouble code is set, the units automatically stops logging data 30 minutes after the code is set, allowing you to examine data before and after--even days later. They use a laptop PC for display and include Windows software. Regular exams can maintain your motorcycle's performance; do your checkups with Daytona Twin Tec Twin Scan II ABS tools.

Not Yet Reviewed

$537.99

Twin Power Starters

Twin Power starters will bring your Harley® back to life and let it roar. These starters are 100 percent new, not remanufactured. They are direct replacements for OEM starters and will give years of service.

5.0 out of 5 stars ( 1 )

$599.99

On Sale

Accutronix Elite Smooth Triple Trees

Accutronix Elite Smooth Triple Trees include the top tree, bottom tree, stem, stem nut, and fork stops. They come with installation instructions and mounting hardware as required. The Triple Trees are machined from 6061 T-6 billet aluminum and are available in a variety of finishes— including chrome, polished, and the exclusive "Night Series" (contrast-cut black anodized with machined areas). These bike accessories fit all FXST models.

Not Yet Reviewed

$589.46

—

$685.76


$530.51

—

$617.18

Performance Machine 6-Piston Differential Bore Calipers for 11.5 in. Discs

Performance Machine 6-piston differential bore calipers for 11.5 in. discs offer a significant improvement in the braking and overall performance of your Harley-Davidson®. Most stock front brakes are dangerously weak, so this upgrade will make a huge increase in stopping power and give you much better control. Differential bore technology has been applied to this 6-piston version, making it the most powerful and stylish brake available for new-generation bikes. PM merges style and function for an ultra-clean look with proven technology for optimal braking performance. Each caliper is machined from billet aluminum to eliminate flex. They're available in various finishes and are subjected to rigorous testing to ensure performance. Search by make and model to order the correct calipers for your bike. Dual-disc applications require a left and right caliper.

5.0 out of 5 stars ( 1 )

$636.95

S&S Cycle Early Twin Cam Easy Start Chain Drive Camshaft Kits

S&S Cycle Early Twin Cam Easy Start chain drive camshaft kits offer more performance for less money and more time to enjoy riding. These kits allow your stock starter to start any engine. Plus, some kits reuse stock components and can be used with stock valve springs. Most Easy Start kits include the cams, gear cover gasket, cam bearings, and instructions. Installation doesn't take long and S&S offers many choices to meet your engine size and compression ratio. An easier way to increase performance without emptying your wallet--S&S Cycle Early Twin Cam Easy Start chain drive camshaft kits.

Not Yet Reviewed

$540.95

Vance & Hines V02 Falcon Air Intake Kits

Vance & Hines offers V02 Falcon air intake kits for fitment on a wide range of Harley-Davidson© street bikes from 1991 and up. Developed for the performance-minded enthusiast looking for superior bolt-on power and torque, the VO2 Falcon resets the bar for 90 degree intakes with four superb finishes—including show-quality chrome, ceramic matte black, and two eye-catching carbon fiber choices: high gloss traditional weaved carbon and first for the V-Twin world, matte forged carbon. From its slant-nosed oversized filter for higher volume airflow to its precision-machined billet aluminum winged mounting and integrated breather assembly, the clean minimalist design of the VO2 Falcon yields a streamlined hot rod look that is equally powerful in its simplicity as it is in its performance. Order the model designed to fit your motorcycle. Additional details: * Sleek forward-facing 90 degree intake design * Race-proven intake tube available in four finishes: chrome, matte black, weaved carbon fiber, and forged carbon fiber * CNC-machined billet aluminum backing plate, breather stand-offs and flange cover * Integrated breather assembly using 12-point stainless banjo bolts * Washable high-flow slant-nosed conical air filter with stamped Vance & Hines logo * Matched induction module cover on throttle-by-wire models

Not Yet Reviewed

$604.95

—

$659.95

All Balls Racing High-Torque Starters

If your starter is no longer engaging your Harley's® engine, get it involved with All Balls Racing high-torque starters. They're manufactured with all-new components fine-tuned for starting your Harley-Davidson® V-Twin engine. Make it the perfect performance union with All Balls Racing starters. The high-torque starters feature: * Clutches with 20 percent oversize rollers * Idler gears manufactured from cold-headed steel * End-frames which are cold-chamber die-cast and precision-machined * Armature hairpins resistance-fused to the commutator * A 10/32 in. threaded output shaft * Conversion bolt for the earlier 1/4 in.-20 threaded output shafts * Choice of finish, including chrome or black powdercoat

5.0 out of 5 stars ( 3 )

$504.74

—

$535.59

HardDrive Softail Tanks

HardDrive softail tanks offer years of leak-free, trouble-free riding. Made from heavy-gauge steel, these gas tanks with dash mount can be used with stock or stock-style seats, OEM-style screw-in gas caps, and the gauge-equipped left side cap. Tanks are available for the carburetor and EFI. Fit your Twin Cam softail with a new tank from HardDrive.

Not Yet Reviewed

$685.76

HardDrive Spoked Wheels

HardDrive spoked wheels are available for many stock or custom motorcycle applications. They're laced in three styles to a chrome billet aluminum hub. The chrome steel spokes are laced in a standard 40-spoke pattern, a custom 60-spoke pattern, and a fully custom 48-fat spoke pattern with 9mm spokes. Wheels come sealed for tubeless tires and include chrome valve stems, inner sleeves, and sealed wheel bearings (except 1984-99, which come with 3/4 in. Timken bearings with outer seals installed). Let HardDrive's 50-plus years of experience be part of your game plan—order HardDrive wheels for your Harley-Davidson ® V-Twin application. Notes: * Application and fitment suggestions are for axle size, hub width, and rotor usage * Wheels are made for custom fitment and may require modified axle and rotor spacing * Will not fit with front wheel speedometer drive on narrow glide front-ends * Wheels designated for 2000-up have the ability to swap bearings and sleeves to another size to expand usage onto other applications

2.0 out of 5 stars ( 1 )

$640.76

On Sale

Accutronix Elite Triple Trees

Add style and long-lasting reliability to your bike with Accutronix Elite triple trees. Made from 6061 T-6 billet aluminum combined with a unique design, high-end quality, and expert craftsmanship to deliver one sharp looking addition for your bike. They are available in black anodized, chrome, or polished finishes. The Accutronix Elite triple trees are available in a 0-, 5-, or 7-degree rake angles and include top tree, bottom tree, stem, fork stops, and hardware, along with instructions to complete your installation and get you back on the road.

Not Yet Reviewed

$589.46

—

$685.99


$530.51

—

$617.39

Daytona Twin Tec TC88 Ignition Kits

Just do it. Installing Daytona Twin Tec TC88 ignition kits are one of the best things you can do to your bike. With them, you'll pull harder, start faster, won't foul the plugs, and it'll idle great, too. If you're looking for a more adaptable and tunable upgrade and timing advance modifications to accommodate stock to customized engines, their adjustability factor and easy plug-in installation are the big reasons for their use, as well as the easy to dial-in, digitally set rpm limits with a selectable multi-spark mode for quick starting and smooth cruising. Daytona Twin Tec's product focus is electronic fuel injection and ignition systems for Harley-Davidson® motorcycles. These modules support all sensors, including theft/security systems, and include the TC88 ignition, coil, and wire sets. An optional USB interface and software for programming custom advance curves are available.

Not Yet Reviewed

$595.99

Performance Machine Dominator Black Anodized Rotors

Performance Machine Dominator black anodized rotors are CNC precision-machined to ensure a flat and parallel surface. Hardening the 420 stainless steel outer band to meet RC36 specifications, coupled with a full floating design, yields a motorcycle brake rotor with a higher resistance to deformation. The wave cut braking surface is drilled in a sweep pattern for optimal heat dissipation with a reduction in weight. The inner carrier utilizes the increased strength of 7075-T6 aluminum for a lighter weight design while improving braking performance. Features: * Full floating design dissipates heat, resists warping * Designed for use with most OEM and aftermarket wheels * Material thickness: 0.200 * 2.22 I.D. with 3.250 in. BCD * Also available in a gold anodized finish * Ideal for a wide range of Harley-Davidson® bikes from 1984 and up

Not Yet Reviewed

$520.95

Mustang Motorcycle Products Wide Touring Vintage Seats

Perfect for all-day riding, Mustang Motorcycle Products wide touring vintage seats are comfortable for both the driver and the passenger. The deeply contoured black vinyl front bucket-style driver seat puts you at the ideal cruising angle, and the wide passenger seat angles forward for optimal back support and features built-in steel support wings to keep the foam edges from sagging. These seats are skirted with a braided edge trim and feature a two-piece look on a single base plate. So, before the next cruise or poker run, bolt one on your motorcycle and ride on in superb comfort and style.

4.5 out of 5 stars ( 2 )

$709.00

Daytona Twin Tec TC88A-EX Ignition Kits

Daytona Twin Tec's TC88A-EX ignition kit 3088 includes: 1009-EX/TC88A-EX ignition module, 2008 coil, 3002 wires, and 18014 USB interface. Components are a direct-fit, plug-and-play for all 2004-06 carbureted Harley-Davidson© Twin Cam 88 engines and Sportsters. Product details: * Compatible with all aftermarket tachometers * Built-in data logging, stores the last 30 minutes of operation * Easy to access and adjust the four rotary config switches * Supports all OE sensors, including the instrument cluster, turn signal/security module (TSM/TSSM) and the J1850 data bus * Wide timing advance adjustment range accommodates stock to highly modified engines * Digitally set RPM limit (100 rpm steps from 3000-9900 rpm) * Coil outputs protected against short circuits * Extensive diagnostics * Billet aluminum housing with black anodized finish Additional notes: * Twin Cam engines utilize a non-adjustable crankshaft position sensor. This means that mechanical timing adjustments are no longer possible. The 1009/TC88A allows you to adjust your initial timing +/- 4 degrees using a rotary switch. A second switch sets the advance curve slope. The combination of these two switches allows the user to optimize the timing advance for a wide range of applications, from stock to highly modified engines. * The 1009/TC88A also features built-in data logging that stores data in an endless loop for the last 30 minutes of engine operation—including RPM, vehicle speed, manifold pressure, ignition advance, and battery voltage. Engine builders will find the data logging feature highly useful for tuning, diagnosing problems, and reducing unjustified warranty claims. * Like the H-D© OE module, the TC88A sends RPM data to the OE tachometer over the J1850 data bus. TC88A units also provide an optional 12 V square wave tach signal (one pulse per revolution) that is compatible with most tachometers intended for 1999-2003 Twin Cam 88 applications. This allows you to retrofit a wide range of tachometers to newer 2004-06 models.

Not Yet Reviewed

$623.95

Vance & Hines V02 Onyx Air Cleaners

Form and function find perfect balance with Vance & Hines V02 Onyx air cleaners. Their completely open-face design allows for maximum airflow, while the billet aluminum cover is CNC-machined to perfection and finished off with one of two black finishes. Add enhanced airflow for performance and a dark, sinister appearance to complete the look of your Harley®. Select the V02 Onyx designed for your motorcycle in the preferred finish. Features: * ARP hardware * High-capacity washable air filter element * Force velocity stack * Available in Wrinkle Black or Black Contrast finishes

Not Yet Reviewed

$549.95

—

$549.99

S&S Cycle Twin Cam Cylinders

Boost your engine's performance with S&S Cycle's Twin Cam cylinders. The design, finish and workmanship of these cylinder replacements feature many improvements over stock units, including sturdier walls that are far less prone to warpage. Straighter, sturdier walls equals a better seal, and fit for pistons, and piston rings. An improved machining process also ensures a better surface for both the head and base gaskets. These cylinders feature ductile cast-iron sleeves in aluminum castings and are offered in silver and black wrinkle finish. Select the cylinders designed to fit your specific HD® model.

Not Yet Reviewed

$510.95

Performance Machine Speedster Black Anodized Rotors

Performance Machine Speedster rotors are high performance, CNC-machined motorcycle brake discs, often full-floating, featuring durable 420 stainless steel outer bands with unique cutouts and lightweight aluminum inner carriers. They're designed for improved heat dissipation, weight reduction, and enhanced aesthetics, typically pairing with PM wheels for custom motorcycle builds. These brake rotors use a swept drilling pattern and special finishes like Black Ops or Gold Ops for style and function, resisting warping and improving stopping power. Additional details: * Full-floating design: The outer braking surface moves independently from the inner carrier, allowing for thermal expansion and reducing stress, which prevents warping and improves pad contact * Materials: Made with a hardened 420 stainless steel outer band and a strong 7075-T6 aluminum inner carrier for reduced weight and increased strength * Features a unique, custom-cut braking surface engineered to match specific Performance Machine wheel designs * Enhances heat dissipation, reduces weight (unsprung weight), and provides better braking performance and feel * These are popular upgrades for Harley-Davidson® riders and custom bike builders looking to improve both the braking performance and the distinctive visual style of their motorcycles, specifically with Performance Machine wheels

Not Yet Reviewed

$520.95

Performance Machine 4-Piston Differential Bore Calipers for 11.5 in. Discs

Performance Machine 4-piston calipers merge style and function for an ultra-clean look with proven differential bore technology. Each of these PM calipers is machined from billet aluminum to eliminate flex and then subjected to rigorous testing on their brake dyno to ensure performance. They are offered in several finishes to complement your Harley-Davidson's® attitude. Choose optimal brake efficiency and style delivered with 4-piston differential bore calipers from Performance Machine.

Not Yet Reviewed

$573.95

Vance & Hines V02 X Air Cleaners

Vance & Hines V02 X air cleaners extract the maximum performance from your high-powered engine. Crowned with a bold CNC-machined billet cover, and bolted down with ARP hardware, these premium air cleaners stand out from the crowd. Each assembly utilizes a K&N Xstream high-flow air filter to unleash the full power of your V-twin machine. Order the model recommended for your Harley-Davidson® application. Additional features: * Backing plate, venturi, and breather assemblies included * Available in chrome or black contrast finish

Not Yet Reviewed

$549.95

S&S Cycle Early Twin Cam Gear Drive Camshafts

Already running a set of gear driven cams? Looking to swap and make more power? S&S cycle offers gear driven camshafts with only the inner gears. Simply reuse the outer drive gears from the set you already have. Camshafts come complete with both cams, and both inner gears already pressed on the shafts. This is an economical way to swap cams without buying parts you don't need.

Not Yet Reviewed

$595.95

Wiseco Powersports 4-Stroke Forged Series Piston Kits

Wiseco powersports 4-stroke forged series piston kits include your rings, piston pin, and circlips. Wiseco has a decade of experience producing quality pistons for dirt bikes, motorcycles, ATVs, snowmobiles, and outboard marine engines. Their piston kits provide strong, lightweight pistons with optimized designs that improve engine efficiency and maximize your torque and throttle response. Plus, Wiseco powersports piston kits are produced right here in the USA. It's time to blaze your own trail with these Wiseco powersports piston kits! Order the piston kit designed to fit your application.

3.0 out of 5 stars ( 2 )

$566.99