Selected Filters


Loading...

Availability


HARLEY-DAVIDSON FXR3 Parts and Accessories

Part Groups

Results 1 - 10 of 10

S&S Cycle Hi-4N Ignitions

S&S Cycle Hi-4N ignitions are one-piece machined aluminum housings that reduce vibration and improve heat dissipation and reliability. Features: * Improved kick-start algorithm designed to start as easily as points * BCD switches with solid detent * Legible markings allow easy and repeatable adjustments of mode, advance rate, and rev limit * Single-fire and dual-fire function built into a single module * Flexible wiring harness makes installation easier

Not Yet Reviewed

$539.96

Mikuni HSR Carburetors Easy Kits

Mikuni HSR Easy Kits offer bolt-on performance with pre-jetted and ready-to-run carburetors. These uniquely designed kits utilize your stock throttle cables for a quick install, and to retain your motorcycle's original appearance. The HSR flatslide carburetors deliver excellent throttle response and control. The smoothbore allows the engine to reach its full power potential, so you accelerate and pass with confidence. You'll get good gas mileage and many years of dependable, carefree performance. Mikuni HSR Easy Kits are designed to work with your original Harley-Davidson® intake manifold, choke cable, air cleaner, and throttle cables. You can run other high performance air filters designed for the CV-type carburetors by using the special adapter included in the kits.

5.0 out of 5 stars ( 6 )

$596.99

Mikuni HSR Carburetors Total Kits

Go for high-flow with Mikuni HSR Total Kits! These kits are complete with everything needed for a total installation. Each includes an HSR 42mm or 45mm smoothbore carburetor, new performance manifold, rubber flange, high-flow air filter, chrome cover, chrome breather kit, and mounting hardware. Mikuni high-flow filters support 100 hp with no loss from filter restriction.

5.0 out of 5 stars ( 3 )

$721.99

S&S Cycle Roller Rocker Arms

S&S Cycle roller rocker arms were designed for superior strength and to eliminate the failure-prone stress areas found in other rockers. These replacement arms are forged from 8620 steel, heat-treated, and then shot-peened for additional strength. They feature 3/4 in. long bronze bushings, compared to the more common 1/2 in. long bushings or needle bearings. S&S Cycle roller rocker arms are available in 1.500:1 ratio, 1.625:1 ratio and 1.725:1 ratio. Order the set recommended for your bike model.

Not Yet Reviewed

$649.99

HardDrive Coned Ram-Air Air Cleaners

Are you looking to improve your bike engine's breathing capability by installing an open element air filter? HardDrive Coned Ram-Air air cleaners are custom-made, tilt-forward air cleaners. They feature a 4.5 x 12 in. CNC billet aluminum housing available in your choice of finishes, along with high-flow air filters, and 90 degree manifolds. When you increase efficiency, power and economy also improve. Coned Ram-Air intake units are available for fitment on a wide range of Harley-Davidson® motorcycles.

Not Yet Reviewed

$580.99

P-Ayr Products Replica Motorcycle Engines

P-Ayr replica motorcycle engines are designed to bolt into your bike in place of your real engine for test fitting parts. They include all of the necessary mounting holes with steel threaded inserts so you can mock up your new high performance parts. P-Ayr uses steel inserts for all bolt holes, and all specifications are held to OEM tolerances. You can bolt any factory component or accessory to a P-Ayr engine and it will fit. Made from durable polyurethane foam they have steel inserts for easy mounting. Save time, money, and hassle when it comes time to install your next power plant.

Not Yet Reviewed

$524.99

Vance & Hines V02 Falcon Air Intake Kits

Vance & Hines offers V02 Falcon air intake kits for fitment on a wide range of Harley-Davidson© street bikes from 1991 and up. Developed for the performance-minded enthusiast looking for superior bolt-on power and torque, the VO2 Falcon resets the bar for 90 degree intakes with four superb finishes—including show-quality chrome, ceramic matte black, and two eye-catching carbon fiber choices: high gloss traditional weaved carbon and first for the V-Twin world, matte forged carbon. From its slant-nosed oversized filter for higher volume airflow to its precision-machined billet aluminum winged mounting and integrated breather assembly, the clean minimalist design of the VO2 Falcon yields a streamlined hot rod look that is equally powerful in its simplicity as it is in its performance. Order the model designed to fit your motorcycle. Additional details: * Sleek forward-facing 90 degree intake design * Race-proven intake tube available in four finishes: chrome, matte black, weaved carbon fiber, and forged carbon fiber * CNC-machined billet aluminum backing plate, breather stand-offs and flange cover * Integrated breather assembly using 12-point stainless banjo bolts * Washable high-flow slant-nosed conical air filter with stamped Vance & Hines logo * Matched induction module cover on throttle-by-wire models

Not Yet Reviewed

$604.99

—

$659.99

Wilwood GP310 High Performance Billet Motorcycle Calipers

Built around a 4-piston, high performance powerhouse, these Wilwood GP310 billet aluminum calipers bring distinctive, bold styling. Stainless steel pistons are employed to reduce brake fade while resisting corrosion, and high-temperature piston seals are utilized to extend life, control retraction, and provide drag-free operation. Additional features include bright finish bleed screws and hardware, plus an exclusive anti-rattle pad clip. The included low-dust, low-noise brake pads are designed to operate in the widest range of temperatures and environments, utilizing Wilwood's industry-leading stainless steel rotor-compatible formulation.

5.0 out of 5 stars ( 10 )

$562.99

Daytona Twin Tec Model 1005 Internal Ignition Kits

Your Harley® will run much better with Daytona Twin Tec Model 1005 internal ignition kits versus the older solid-state points eliminator that relied on the mechanical advance flyweights and all that. The "race mode" settings are awesome! They'll wake up your old bike. The advance curve network with adjustable advance slopes will accommodate stock to highly modified engines. You can digitally set the rpm limit, select single or dual fire mode, and multi-spark mode for quick starting and smooth cruising. An optional USB interface and software for programming custom advance curves are available.

Not Yet Reviewed

$514.99

Daytona Twin Tec Internal to External Ignition Conversion Kits

Daytona Twin Tec offers internal to external ignition conversion kits for a variety of Harley-Davidson© street bikes from 1970 and up. These kits help prevent heat-related internal ignition failures by relocating heat-sensitive components away from engine heat. Additional details: * Allows the use of an external ignition on all carbureted 1970-99 Evolution 1340cc Big Twin and 1971-2003 Sportsters * Includes an OE-style cam position sensor with highly sensitive hall effect sensor and rotor cup * Includes the 1007EX ignition module * Includes adapter harness, mounting stand-offs with screws, and a parts bag with a 4-pin male/female connector/pins/sockets, along with Packard Weather Pack connectors for single-fire coil and tachometer hookup * Includes detailed easy-to-follow directions * This ignition module works in all HD Shovelhead and Evolution engines built from 1970-99. * Kit P/N 3020 does NOT include 2005 coil and 3003 plug wires * Kit P/N 3021 includes everything in the 3020 kit plus 2005 coil and 3003 plug wires

Not Yet Reviewed

$644.99

  • 1
  • Page 1 of 1