Availability
HARLEY-DAVIDSON FLSTFI FAT BOY GRAY GHOST Engines & Components
Showing In Stock Items. Show All 12 Items.
HardDrive Performance Heavy-Duty Oil Filters
HardDrive offers Performance heavy-duty oil filters for a wide range of Harley-Davidson motorcycles from the 1980s and up, including Touring, FLT, Softail, and Sportster models. Order the replacement filter recommended for your bike. Product details: * Media enhancement by M-Pleating, increases dust holding capacity (DHC) and reduces pressure drop * The zigzag pleating pattern provides more filtration area, allowing more DHC * Additional filtration area gives the oil more room to flow, resulting in lower pressure drop * The media is resin-impregnated to ensure structural integrity during its operation under pressure and temperature spikes * Forming tapped thread for easy installation and spin-on * Pre-lubricated gasket * The gasket is lubed from the factory to aid installation * The base plate is covered with shrink film to ensure that the lube stays there until the time of usage and dust protection * Heat-resistant Anti-Drainback valve (ADBV) * Unlike standard nitrile rubber, silicone rubber has a higher heat resistance * The enhanced ADBV will prevent dry starts and provides durability throughout the extended life of the filter * 17mm hex nut * Easy for service and removal after prolonged usage * The nut is designed for safety wire attachment if needed * 16 weld spots for higher nut fatigue strength * 30+ percent gauge thickness for higher burst strength * Oval inlet hole for even lower flow resistance
Not Yet Reviewed
$13.99
Twin Power Oil Filters
Twin Power sets a new clean air standard for your bike's engine through the manufacturing of oil filters. These oil filters utilize high-quality materials and construction to provide impressive filtration levels, and a high oil flow rate to keep your bike running cleanly and smoothly. Each of these oil filters has rolled and crimped edges to safeguard against leakage and features a built-in carbureted relief valve. They are available in a chrome or black finish to help keep that custom look to your Harley® make and model.
Not Yet Reviewed
$12.99
—
$15.99
CP Pistons M Piston Kits
CP Piston M piston kits are available for your powersports applications. These kits include the piston, pin, locks, and rings. CP Pistons use X-forgings to minimize friction and weight without compromising strength. Double pin oilers add twice the amount of oil from the cylinder wall to the wrist pin. Radiused domes are used to maximize quench, while eliminating possible hot spots that promote detonation. CP Piston M piston kits have a V-shaped groove machined into the second ring to collect excess blowby between the top and second rings. This groove is known as the accumulator groove.
( 1 )
$333.99
Twin Power Oil Filter with Easy-Off Nuts
Twin Power sets a new clean air standard for your bike's engine via their oil filters with easy-off nuts. These canister-style filters utilize high-quality materials and construction to provide impressive filtration levels—and a high oil flow rate to keep your bike running cleanly and smoothly. Each oil filters has rolled and crimped edges to safeguard against leakage; a built-in carbureted relief valve; easy twist-off nuts for removal. Twin Power oil filters are available in a chrome or black finish to help your Harley® retain its custom look.
Not Yet Reviewed
$14.99
—
$17.99
S&S Cycle Milwaukee 8 HPT496 Camshafts
S&S Cycle Milwaukee 8 HPT496 camshafts are high performance, bolt-in cams designed for 2017-later Harley-Davidson® Milwaukee-Eight (M8) engines. They deliver a wide power curve with high horsepower and torque, often achieving roughly 130 square (hp/tq) on performance builds. Known for their aggressive idle, these cams work well with stock-compression engines up to 128 cu. in., offering significant performance gains. Key details: * Performance: Known for producing massive mid-range to high RPM power while retaining strong torque, with recorded gains of nearly 30 hp on 117 cu. in. engines * Design: Features a 0.485 in. lift and optimized durations, specifically with less exhaust duration than the S&S 475 to improve tuning flexibility and performance with varied exhaust systems * Bolt-in convenience: Compatible with stock valve springs, tappets, and rocker arms for easy installation * Sound: Renowned for a very aggressive, deep rumble, often described as "sounding like an animal" * Versatility: Works great in stock 107/114 cu. in. engines, but is robust enough for larger 124/128 cu. in. builds, functioning well with up to 11:1 compression * S&S Cycle HPT496 cams are available in both chain-drive and gear-drive options. They're designed to be a durable upgrade, with testing showing higher surface hardness (56.3 Rockwell C) compared to stock cams (49.7 Rockwell C)
Not Yet Reviewed
$219.99
S&S Cycle Oil Filters
S&S Cycle oil filters are constructed out of a sturdy steel canister, which houses the finest filtering media and internal components available. The filter media has traps to catch the smallest particles possible but not restrict flow. The filters are available in a black or chrome finish to accent your ride properly. With S&S Cycle oil filters you'll keep your oil clean and your engine protected.
( 2 )
$183.99
S&S Cycle Milwaukee 8 HPT496 Camshaft Kits
S&S Cycle Milwaukee 8 HPT496 camshaft kits are high performance bolt-in upgrades for 2017–25+ Harley-Davidson® M8 engines, designed to significantly boost horsepower and torque without requiring head work. As the largest bolt-in cams in the S&S lineup, they feature a 0.485 in. lift and are compatible with stock valve springs, offering a broad powerband suited for both stock and larger displacement engines. Key features: * Performance: Designed for a broad, usable power curve with significant increases in mid-range and high-RPM power * Bolt-in installation: Cams work with stock rocker arms and valve springs (first and second-gen heads), making them a high performance, easy-to-install option * Versatility: Compatible with stock engines, higher compression ratios (up to 11:1), and larger displacement, such as 124 in. and 128 in. kits * Components: Kits include the camshaft, cam cover gasket, Viton® O-rings, and necessary installation hardware * Available in both chain drive and gear drive configurations * Performance highlights: -- Power output: Tests have shown the HPT496 can achieve impressive figures, with some setups reaching approximately 130 hp and 130 lbs.-ft. of torque -- Sound: Known for providing a strong, aggressive, and "wild" engine sound -- Engine compatibility: Designed for Milwaukee-Eight engines, except for VVT models * These kits are aimed at riders looking for maximum power increases while maintaining a manageable, streetable setup
Not Yet Reviewed
$295.99
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster