HARLEY-DAVIDSON FLHT ELECTRA GLIDE STANDARD S&S Cycle

S&S Cycle Head Bolt Kits

With S&S Cycle's wide selection of Harley-Davidson® parts, you're sure to find the parts you're looking for, including head bolt kits. These kits include steel 12-point head bolts and washers that are designed to exceed the needs of your high performance engine.

5.0 out of 5 stars ( 1 )

$149.95

—

$224.95

S&S Cycle Late Twin Cam Chain Drive Cam Chest Upgrade Kits

S&S Cycle Late Twin cam chain drive cam chest upgrade kits contain everything needed to replace it all! Your engine will receive increased performance from the higher lifts, optimized camshaft timing, and from more consistent oil flow and pressure. Kits can be installed without the removal of your rocker box covers. They're available for a variety of Harley-Davidson© street bikes from 2006 and up. Kit components include: * Forged cam plate * Forged 3-stage oil pump * Premium lifters * Hydraulic chain tensioners * Quickee pushrods * Pushrod tubes * Chain drive camshafts * Inner camshaft bearings * All necessary gaskets, O-rings, and hardware

Not Yet Reviewed

$1,522.95

—

$1,924.95

S&S Cycle Cylinder Studs

S&S Cycle cylinder studs are the perfect replacement for your OEM or S&S cases. These steel head studs are black oxide coated and strong enough to use on the largest of V-twin engines. So next time you do a top end on your Harley-Davidson®, update those head studs with S&S cylinder studs.

5.0 out of 5 stars ( 1 )

$99.95

S&S Cycle Billet Oil Pumps

S&S Cycle billet oil pumps are designed and built for your V-Twin. They feature a smoother design from beautiful strong billet and pressure relief towers that are .300 in. shorter than your OEM oil pump. Kits may include: * Pump with cover * Mounting bolts * Supply and return gears * Driveshaft with keys and snap rings * Check ball and spring * Pressure relief valve and spring * Check ball and release valve cover screws with O-rings * Miscellaneous hose fittings, plugs, screws, and gaskets

Not Yet Reviewed

$499.95

S&S Cycle Precision Tappets

S&S Cycle precision tappets are high performance replacements for S&S Cycle's previous standard and premium lifters for M8, Twin Cams, and late Sportster applications. Each precision tappet is hand assembled to exacting tolerances and designed for quiet operation and rapid pump up. Features and benefits: * Reduced valve train noise from start-up to shut down * Close tolerances for low leak-down rates * Fast pump up and superior high-rpm performance

Not Yet Reviewed

$279.95

S&S Cycle Standard Adjustable Pushrods

S&S Cycle standard adjustable pushrods help to assure consistent valvetrain operation under all conditions. The pushrods are made from rigid chromoly steel tubing and offer a simple, trouble-free installation. You can purchase just the pushrods or as a set with pushrod covers, O-rings, and cover keepers. Replace the stock, non-adjustable pushrods in your stock or high performance application with S&S Cycle standard adjustable pushrods, available for a wide range of Harley-Davidson® bikes from 1984 and up.

5.0 out of 5 stars ( 1 )

$152.95

S&S Cycle Hi-4N Ignitions

S&S Cycle Hi-4N ignitions are one-piece machined aluminum housings that reduce vibration and improve heat dissipation and reliability. Features: * Improved kick-start algorithm designed to start as easily as points * BCD switches with solid detent * Legible markings allow easy and repeatable adjustments of mode, advance rate, and rev limit * Single-fire and dual-fire function built into a single module * Flexible wiring harness makes installation easier

Not Yet Reviewed

$411.95

—

$599.95

S&S Cycle V-Series Engine Gasket Kits

Whether you are rebuilding a classic or attempting to eliminate a mysterious leak, S&S Cycle V-series engine gasket kits will help you get that new-seal feel that your ride deserves. Their kits are available in various sets, allowing you to do as much or as little as you desire. No matter the project, you can find the gaskets for the job in S&S kits. They are available for various models and in varying engine level kits to fit any cycle application you wish to tackle.

Not Yet Reviewed

$116.95

S&S Cycle 4 in. Sidewinder Big Bore Kits

Inspired by S&S Pro Stock drag race engines, S&S Cycle 4 in. Sidewinder big bore kits utilize a ductile cast iron liner wrapped in cast aluminum for optimum thermal conductivity and performance. These bolt-in kits do not require machining, re-balancing, or engine removal, and include just about everything you'll need to complete the installation. S&S Cycle 4 in. Sidewinder kits offer the biggest cylinder bore that can be installed in a stock crankcase without machining! Features: * Low-friction ductile cast iron liner * 10.5:1 compression * Bolts in with no machining, balancing, or splitting the crankcases * 88 in. engines are boosted to 100 in. * 96 in. and 103 in. engines are boosted to 110 in. * Complete kits include cylinders, pistons, gaskets, and instructions * Wrinkle black and silver cylinders that match stock finish

Not Yet Reviewed

$1,540.95

S&S Cycle Super E and G Teardrop Air Cleaner Kits

S&S Cycle Super E and G Teardrop air cleaner kits offer trademark looks matched with performance. These kits feature S&S Cycle's classic teardrop covers, constructed from aluminum and chromed for great presentation. The specially design dimpled covers not only look good, but also feature directional air cones on the inside to create smooth paths of airflow. Plus, the uniquely designed back plates feature air horn style radiused entryways to reduce turbulence. You'll have an efficient, easy path for intake air to follow into your carburetor. Maximize airflow, possibly add a few horses, and definitely add timeless style with S&S Cycle Super E and G Teardrop air cleaner kits.

Not Yet Reviewed

$395.95

S&S Cycle Teardrop Air Cleaner Kits

S&S Cycle Teardrop air cleaner kits offer classic looks matched with performance. Efficient and free-flowing, these kits feature dimpled aluminum chrome covers with directional air cones on the inside to create smooth paths of airflow. All the while, their uniquely designed back plates feature air horn style radiused entryways to reduce turbulence. Wrangle some additional horsepower and timeless style for your bike with S&S Cycle Teardrop air cleaner kits.

5.0 out of 5 stars ( 4 )

$395.95

S&S Cycle 107 in. Big Bore Kits

S&S Cycle 107 in. big bore kits are easy to install and require no machining or re-balancing. These are the largest bores that can be fit in your stock engine case. This is the largest bore that can be fit in a stock engine case. Stock engine height is maintained so there are no manifold or frame fitment issues. Using an 11-fin design, the pre-finished cylinders closely resemble the OEM shape and are ready to install. Take your stock engine case as big as it'll go with S&S Cycle 107 in. big bore kits! Product features include: * CP pistons feature a 3cc pop-up dome for slightly higher compression * Cylinders feature an increased fin area for better heat dissipation * Centrifugal cast gray liner features 40,000 psi tensile strength for superior wear and performance

Not Yet Reviewed

$1,345.95

S&S Cycle 97 in. Big Bore Kits

S&S Cycle 97 in. big bore kits will increase the displacement of 88 in. engines to 97 in., are easy to install, and require no machining or re-balancing. Using an 11-fin design, these pre-finished cylinders closely resemble the OEM shape and are ready to install. Order an S&S Cycle 97 in. big bore kit—and take your stock engine case as big as it'll go! Features of the S&S Cycle 97 in. big bore kits: * The 97 in. big bore kits for 88 in. motors yield excellent results with stock cylinder heads * Feature the same silver or black wrinkle powder-coat as stock, so they match the stock finish of the engine * Specifications: 3.927 in. bore, 4 in. stroke, 97 in. displacement, and 9.7:1 compression ratio with stock heads (9.3:1 compression ratio with S&S 89cc heads or 10.7:1 with S&S 79cc heads) * Feature the largest bore (3.927 in.) that can safely be used in a cylinder with stock spigot diameter * Included S&S cylinders feature a much stronger cast iron liner to stand up to the added power * Easy installation: no need to bore or split existing cases, just swap the cylinders *Kit includes cylinders, pistons, rings and gaskets (head, base and exhaust) * For best performance, appropriate camshafts, performance air cleaner, performance exhaust and fuel system tuning is required

Not Yet Reviewed

$1,287.95

S&S Cycle Standard Forged Rocker Arms

S&S Cycle standard forged rocker arms are designed for superior strength and to eliminate the failure-prone stress areas found in other rockers. These replacement arms are forged from 8620 steel, heat-treated, and then shot-peened for additional strength. They feature 3/4 in. long bronze bushings, compared to the more common 1/2 in. long bushings or needle bearings. S&S Cycle roller arms are available in the stock 1.625:1 ratio and 1.725:1 ratio. Order the set recommended for your bike model.

Not Yet Reviewed

$334.95

S&S Cycle Street Performance .585 Valve Spring Kits

S&S Cycle offers Street Performance .585 in. valve spring kits to upgrade your bike's performance—so you don't have just another "me too" motorcycle. Order the valve spring kit designed for your make and model. Features and specifications: * Available for fitment on a variety of Harley-Davidson® and Buell models * Kit contains springs, top and bottom collars, keepers, and shims * Accommodates camshaft lift to 0.585 inches * Suitable for high performance applications * Coil springs reduce the risk of valve float

Not Yet Reviewed

$163.95

S&S Cycle Milwaukee 8 Chain Drive Camshaft Kits

Tap into the power of your Milwaukee 8 engine by installing an S&S Cycle camshaft. These kits will increase the torque and horsepower of your bike. They include all required gaskets, O-rings, bearings, and hardware. Order the model recommended for your Harley-Davidson® application.

Not Yet Reviewed

$299.95

S&S Cycle Throttle Hog Throttle Bodies

S&S Cycle Throttle Hog throttle bodies are available for a variety of Harley-Davidson® big twins using cabled operated throttles and are designed to deliver more airflow for improved performance. Choose from 58mm, for stock or mildly built engines, or the whopping 66mm Throttle Hog for big inch engines. Order the model for your HD® bike application. Features and benefits: * Available for 2002-2005 Harley-Davidson® big twins using cabled operated throttles * S&S Cycle EFI Hot Setup Kit installations and T-Series long block engines with cable controlled throttles * S&S Stealth air cleaner kits, with the proper bore sizes are available * Works well with all air cleaner kits designed for throttle-by-wire engines with stock breathe system * One-piece design for easy installation and stock appearance * Compatible with stock sensors, fuel rail, and throttle cables * Black powdercoat finish matches stock * Sealed, stainless steel throttle shaft with dual roller bearings for smooth operation and no air leaks * Kit includes hardened steel flanges and seals * No stock throttle body exchange required!

Not Yet Reviewed

$995.95

S&S Cycle Heavy-Duty Rocker Arm Stud Kits

Extend the life of your cylinder heads by using S&S Cycle rocker arm studs. They prevent damage to rocker arm towers, include 12-point nuts, and feature a black oxide finish.

Not Yet Reviewed

$122.95

S&S Cycle Heavy-Duty Valve Spring Kits

S&S Cycle offers heavy-duty valve spring kits to upgrade your bike's performance—so you don't have just another "me too" motorcycle. Order the S&S Cycle heavy-duty valve spring kit designed for your bike's application. Features and specifications: * Available for M8 2017-2024 Harley-Davidson® models * Kit includes springs, top collars, keepers, valve seal/bottom collars * Works well with cams up to .605 in. lift * High performance conical single wire spring

Not Yet Reviewed

$395.95

S&S Cycle Mini Teardrop Stealth Air Cleaner Kits

Bikers, get a little extra leg room with S&S Cycle Mini Teardrop Stealth air cleaner kits. They maintain 85 percent of their original size and display an iconic look. Machined openings around the rim add style while providing the additional airflow your engine craves. S&S Cycle Mini Teardrop Stealth air cleaner kits are available in chrome and gloss black powdercoated finishes. Order the model recommended for your motorcycle application.

Not Yet Reviewed

$395.95

S&S Cycle Stealth Air Cleaner Kits

S&S Cycle stealth air cleaner kits are for the rider who wants to go fast. The backing plate has a smooth radius entry to the throttle body or carburetor. The air filter is made of cotton gauze and is reusable and washable and it also features an air directional stinger cone that creates a smooth path for air to go into the intake. These kits are available with your choice of different S&S covers. These kits can be ordered without the cover so you can use your stock air cleaner cover if you want that sneaky concealed look. If you feel you need more power, a high-flow filter is also available for purchase separately. Upgrade your engine's breathing with the S&S Cycles stealth air cleaner kits. Select the kit designed and suited to your application needs.

5.0 out of 5 stars ( 2 )

$195.95

—

$550.95

S&S Cycle Quickee Adjustable Pushrods

Easily installed, easily removed--S&S Cycle Quickee adjustable pushrods are designed for a simple, trouble-free installation that does not require removal of the gas tank, rocker assemblies, or even the rocker box cover! Innovative Quickees feature threaded adjusters that screw into the pushrods until the threads disengage and the adjuster simply slides into the pushrods, making your installation or removal easy. Then, once the pushrods are installed and adjusted, the locknut keeps the adjuster from moving. They will work with stock and aftermarket cams, as well as stock pushrod covers. S&S proven performance makes life easier with their Quickee adjustable pushrods.

1.0 out of 5 stars ( 1 )

$314.95

S&S Cycle Stealth Air Stinger Air Cleaner Kits

The S&S Cycle Stealth Air Stinger air cleaner kits take the existing air cleaner and replaces the air smoothing stinger with a similarly shaped filter element. More filter surface equals a 55 percent gain over a factory filter, especially in Harley-Davidson® Milwaukee-Eight (M8) models. S&S Cycle offers applications for most Harley-Davidson® models ranging from 2001 up to current year. Each kit includes a cotton gauze air filter with a stylish air cleaner cover. The covers are offered in different styles, in your choice of chrome or gloss black finishes to complement your motorcycle's aesthetics. Some kits come with an aluminum anodized round ring. The Air Stinger filter element is washable and designed to last for years. Select the kit designed specifically for your HD® bike's setup.

Not Yet Reviewed

$249.95

—

$395.95

S&S Cycle Air Stinger Stealth Air Cleaner Kits

S&S Cycle Air Stinger Stealth air cleaner kits take the existing high-flow Stealth air cleaner and replace the air smoothing stinger with a similarly shaped filter element, offering more filter surface for more airflow over the factory filter. The Air Stinger filter elements are washable, just like the Stealth filters, and are designed to last for years. S&S Cycle Air Stinger Stealth kits include either a stylish S&S brushed ring, or a gloss black or chrome teardrop cover. Select the air cleaner kit designed for your motorcycle.

Not Yet Reviewed

$249.95

HARLEY-DAVIDSON FLHT ELECTRA GLIDE STANDARD S&S Cycle Parts and Accessories