Availability
Showing In Stock Items. Show All 19 Items.
Motion Pro Harley-Davidson® pushrod tools are designed for collapsible pushrod tubes. They make removal and installation much easier without busting your knuckles, and help protect engine parts from getting scratched when trying to use a screwdriver between the fins. The flat portion fits under the cylinder head while the cupped end fits over the bell in the tube to allow compression of the spring for easy access to the spring cap retainer. If you work on your own motorcycle, Motion Pro Harley-Davidson® pushrod tools are a necessity for your tool collection.
( 3 )
$53.99
Kibblewhite valve stem installation protectors are designed to fit over the top of the valve stem during installation. These flexible, thin-wall protectors protect the sealing element from any sharp edges that may cause damage while installing your valve stems.
( 4 )
$2.46
—
$4.92
Antigravity Batteries Re-Start batteries have built-in jump-start and full management systems. They intelligently monitor their own voltage, and just before going completely dead, they promptly initiate sleep mode with just enough energy to get your vehicle started again. Simply press the restart button located on the battery, start your vehicle and drive away. These are extremely lightweight and high-power lithium-ion replacements for your heavy lead/acid batteries. They're available for most modern motorcycles and ATV/UTVs. No more dead battery emergencies or being stranded with Antigravity Batteries Re-Start batteries! Features and specs: * Up to 2 times the cranking power and lifecycle of heavy lead/acid batteries * Up to 70 percent lighter than heavy lead/acid batteries * Management system offers low-voltage cutoff, over-charge/over-discharge protection, lithium cell balancing, and thermal protection * 4 terminal posts for ease of use with right or left side connections and any orientation (no liquids to spill) * Capable of holding a charge for up to one year when no parasitic drains (alarms, GPS, etc.) are present * Shock and vibration resistant for durability * No acids or heavy metals for lower environmental impact
( 13 )
$249.99
Motion Pro HD rear wheel alignment tools are for use on Harley-Davidson® Softail, Sportster, and Dyna models. Features include: * Designed to help set rear wheel alignment * Fast, accurate, and easy to use * Eliminates the need to use a tape measure * Proper wheel alignment extends chain, sprocket, and belt life
( 2 )
$21.99
Daytona Twin Tec Twin Scan II ABS tools will help keep your Harley® healthy. The units will read and clear diagnostic trouble codes from your engine control module (ECM), turn signal/security module (TSM/TSSM), speedometer, tach, and anti-skid braking system (ABS). These compact, low-cost "doctors" are especially skilled in diagnosing hard-to-find, intermittent trouble codes. Twin Scan II ABS scan tools also have brake bleeding capabilities and built-in data logging. Your motorcycle can be operated while the units are installed, and under normal conditions (no trouble codes), the units will store data for the last hour of operation. If a trouble code is set, the units automatically stops logging data 30 minutes after the code is set, allowing you to examine data before and after--even days later. They use a laptop PC for display and include Windows software. Regular exams can maintain your motorcycle's performance; do your checkups with Daytona Twin Tec Twin Scan II ABS tools.
Not Yet Reviewed
$537.95
Feuling Parts Crankshaft Runout Measuring Tools measure crankshaft runout on Harley-Davidson® Shovelhead and Evolution engines with the crankshaft installed. They mount to the cam chest side of the engine case using the cam cover bolt holes. The tools provide quick and accurate readings of crank pinion shaft runout—and make for a great display to show and explain to owners the condition of their crankshafts. They also quickly and accurately measure gear drive backlash on Twin Cam engines, using the supplied spacer to bolt to the top right cam cover bolt hole. Product includes: * Tool plate * +/-0.001 dial indicator * Thumb screws and hardware
( 1 )
$119.95
OTC ignition switch housing alignment tools are for use on select Harley-Davidson® bikes to ensure the housing is properly aligned as the retaining screws are being torqued. Correct alignment can extend the life of the ignition switch. Applications include select 2003 and later FL Touring models, and select 2002 and later V-Rods. The tools have an anodized aluminum construction. For a simple repair or the most complex drivability concern, these award-winning OTC tools can universally solve problems faster, and at better value, than any other product line available.
Not Yet Reviewed
$59.99
Kibblewhite valve stem seal installation tools assist you in servicing your motorcycle. They are designed to help you center the OE-style seals over the valve stem and valve guide. Just a few light strikes from a hammer will set the seal onto the guide. Kibblewhite valve stem seal installation tools are made from high-impact plastic and are matched to the seal and the stem diameter.
Not Yet Reviewed
$8.58
For those hard to find parts, Pit Posse has you covered. These rear axle nut wrenches are made from hardened vanadium steel, feature a contoured rubber grip, and it even has a 3/8 in. drive torque wrench opening. When you need the right part to finish the job, turn to Pit Posse.
Not Yet Reviewed
$19.99
Motion Pro clutch adjuster nut tools are for use on all 1998 and later Big Twin models, excluding applications with hydraulic clutches. These heavy-duty deep sockets allow the tools to recess into the clutch basket and can be driven with 11/16 in. combination wrench or an adjustable wrench. With a compact design to fit easily in your saddle bag or tool wrap, these tools have a through-hole allows that allows for easy access with a hex wrench to hold clutch adjuster screw, while simultaneously tightening the adjuster locknut. To maintain and repair your motorcycle, choose quality tools by Motion Pro.
Not Yet Reviewed
$15.99
Clearance
P-Ayr replica motorcycle engines are designed to bolt into your bike in place of your real engine for test fitting parts. They include all of the necessary mounting holes with steel threaded inserts so you can mock up your new high performance parts. P-Ayr uses steel inserts for all bolt holes, and all specifications are held to OEM tolerances. You can bolt any factory component or accessory to a P-Ayr engine and it will fit. Made from durable polyurethane foam they have steel inserts for easy mounting. Save time, money, and hassle when it comes time to install your next power plant.
Not Yet Reviewed
$524.99
$413.50
S&S Cycle offers drilling fixture kits used to locate holes for drilling and tapping of the transmission case on various touring bikes models when installing a T-Series engine with oil line adapter kit. Each transmission drilling fixture kit comes complete with drilling fixture, drill bushing, drill and tap.
Not Yet Reviewed
$293.95
Twin Power's tension reliever adjustment wrenches are angled and fitted for easy adjustments of their Manual Tension Reliever to give your primary chain the support it needs. These components are ideal for working on a wide range of Harley-Davidson® bikes.
Not Yet Reviewed
$7.71
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
