HARLEY-DAVIDSON HardDrive Products - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

HardDrive Softail Tanks

HardDrive softail tanks offer years of leak-free, trouble-free riding. Made from heavy-gauge steel, these gas tanks with dash mount can be used with stock or stock-style seats, OEM-style screw-in gas caps, and the gauge-equipped left side cap. Tanks are available for the carburetor and EFI. Fit your Twin Cam softail with a new tank from HardDrive.

Not Yet Reviewed

$600.26

—

$702.86

HardDrive 40mm CV Carburetors

HardDrive offers 40mm CV carburetors for a variety of Harley-Davidson© street bikes from the 1980s, '90s, and 2000s. These stock replacements include many features, such as: * 40mm CV carburetor body * Idle mixture screw is exposed for easy tuning * Comes with fuel line and vent hose * Upgraded to brass fuel inlet, compared to the stock plastic inlet * Jets installed: Slow No. 45, Main No. 185 * Additional jets for tuning Pilot No. 48, No. 50; Main No. 190, No. 200 * Updated components to be direct interchange with OE Keihin CVs * Utilizes stock-style choke cable (not included) * Rebuild kit available

Not Yet Reviewed

$233.06

HardDrive Brake Tee Fittings

HardDrive brake tee fittings are available for various front and rear applications. These brake line junctions are offered in steel and aluminum construction with both receiving a chrome plated finish for lasting good looks.

1.0 out of 5 stars ( 1 )

$16.16

—

$19.76

HardDrive Premium Factory-Activated Sealed Batteries

HardDrive premium factory-activated sealed batteries have a higher Cold Cranking Amps (CCA) rating compared to the same series of standard factory-activated batteries. Designed for American V-Twin motorcycles, these spill-proof sealed batteries have the performance and safety features you want and need for your bike. Features: * AGM separators * Heavy-duty terminals * Calcium alloy technology improves cranking power and helps give the battery longer life * Safety valve flame arrestor regulates internal pressure * Tight-pack absorbed glass mat separators absorb acid and reduce damage due to vibration * Sonically sealed cover allows for angled battery mounting if needed Note: Freshening charge is recommended prior to installation

Not Yet Reviewed

$147.68

—

$239.07

HardDrive Rocker Cover Kits

Add some shine to your Harley®. Replace your tarnished or peeling rocker covers with HardDrive rocker cover kits. These chrome plated rocker covers for your Big Twins and Sportsters will put some bling on your bike.

Not Yet Reviewed

$321.26

HardDrive Fork Tubes

Revive a tired looking front-end with new HardDrive fork tubes for your Harley®. When it's time to replace your bent or otherwise damaged units, these hard chrome fork tubes are quality replacement parts. Please check applications for proper fitment before ordering to ensure the correct length is ordered.

4.17 out of 5 stars ( 6 )

$176.36

—

$437.36

HardDrive Spoked Wheels

HardDrive spoked wheels are available for many stock or custom motorcycle applications. They're laced in three styles to a chrome billet aluminum hub. The chrome steel spokes are laced in a standard 40-spoke pattern, a custom 60-spoke pattern, and a fully custom 48-fat spoke pattern with 9mm spokes. Wheels come sealed for tubeless tires and include chrome valve stems, inner sleeves, and sealed wheel bearings (except 1984-99, which come with 3/4 in. Timken bearings with outer seals installed). Let HardDrive's 50-plus years of experience be part of your game plan—order HardDrive wheels for your Harley-Davidson ® V-Twin application. Notes: * Application and fitment suggestions are for axle size, hub width, and rotor usage * Wheels are made for custom fitment and may require modified axle and rotor spacing * Will not fit with front wheel speedometer drive on narrow glide front-ends * Wheels designated for 2000-up have the ability to swap bearings and sleeves to another size to expand usage onto other applications

2.0 out of 5 stars ( 1 )

$325.76

—

$689.36

HardDrive Fat Tiller Handlebars

HardDrive Fat Tiller handlebars are beefy! They're constructed from heavy-duty, high-quality steel tubing for 3 1/2 in. center-to-center rider mounting. They're constructed from high-quality steel tubing, expertly welded, step jointed, and drilled for internal wiring with an installed pull-cord for an easy wire installation. HardDrive handlebars are the perfect complement to your ride.

Not Yet Reviewed

$137.66

—

$158.36

HardDrive Fork Tube Rebuild Kits

HardDrive fork tube rebuild kits contain all hardware, seals, and gaskets needed for your fork slider rebuild. These quality components provide improved suspension and handling for you easy riders when traversing the hills and dales. HardDrive kits are an excellent bike maintenance value.

Not Yet Reviewed

$29.01

—

$112.46

HardDrive Complete Compensator Sprocket Assemblies

HardDrive complete compensator sprocket assemblies are direct OE replacements and are available in several designs, including ones for offset primaries. These complete assemblies include sprocket, sprocket shaft and nut, sliding cam, and compensator with springs. Select the one designed for your Harley®.

Not Yet Reviewed

$187.16

—

$424.76

HardDrive OE-Style Stainless Steel Brake Rotors

Eliminate noise or pulsation in your brakes with HardDrive OE-Style stainless steel brake rotors. These replacement rotors are surface induction hardened for superior wear characteristics and are available in natural and polished finishes. They meet or exceed OEM specifications and are drilled for superior heat disbursement and increased stopping power.

4.3 out of 5 stars ( 10 )

$84.56

—

$244.76

HardDrive Billet Reusable Oil Filters

HardDrive reusable oil filters feature a CNC-machined billet housing with fins to increase its cooling abilities. Each filter element has three magnets to help collect debris that may contaminate the oil. These oil filters contain stainless mesh filter media that improves flow over paper fabric media; this also allows them to be easily cleaned and reused. The assemblies are available with a chrome or black anodized finish.

Not Yet Reviewed

$169.16

HardDrive High Performance Compensator Sprockets

HardDrive high performance compensator sprockets are designed to outperform OE. They are engineered with heavier springs and increased travel to support the high-torque output, and will protect the engine and driveline components. Each HardDrive compensator features improved oil passages and a needle bearing thrust washer that improves the overall operation of the components.

Not Yet Reviewed

$400.46

HardDrive 6-Speed Chain Conversion High Performance Sprockets

HardDrive 6-speed chain conversion high performance sprockets are for use with 530 chains. Made from heat-treated tool steel, the 24-tooth sprockets are offered in different offsets. Select the one needed for your Harley®.

Not Yet Reviewed

$85.46

HardDrive Performance Heavy-Duty Oil Filters

HardDrive offers Performance heavy-duty oil filters for a wide range of Harley-Davidson motorcycles from the 1980s and up, including Touring, FLT, Softail, and Sportster models. Order the replacement filter recommended for your bike. Product details: * Media enhancement by M-Pleating, increases dust holding capacity (DHC) and reduces pressure drop * The zigzag pleating pattern provides more filtration area, allowing more DHC * Additional filtration area gives the oil more room to flow, resulting in lower pressure drop * The media is resin-impregnated to ensure structural integrity during its operation under pressure and temperature spikes * Forming tapped thread for easy installation and spin-on * Pre-lubricated gasket * The gasket is lubed from the factory to aid installation * The base plate is covered with shrink film to ensure that the lube stays there until the time of usage and dust protection * Heat-resistant Anti-Drainback valve (ADBV) * Unlike standard nitrile rubber, silicone rubber has a higher heat resistance * The enhanced ADBV will prevent dry starts and provides durability throughout the extended life of the filter * 17mm hex nut * Easy for service and removal after prolonged usage * The nut is designed for safety wire attachment if needed * 16 weld spots for higher nut fatigue strength * 30+ percent gauge thickness for higher burst strength * Oval inlet hole for even lower flow resistance

Not Yet Reviewed

$11.66

—

$17.06

HardDrive 96-06 Hand Control Kits

HardDrive 96-06 hand control kits provide a clean look. These redesigned controls feature hidden mounting hardware on the switch housings and smooth mounting clamps. They are available for 1996-06 models with or without switches and are not interchangeable with OEM controls. Also, many are offered in chrome or black finishes. Choose the appropriate HardDrive hand controls for your motorcycle year.

Not Yet Reviewed

$301.46

—

$402.26

HardDrive Tall Sissy Bars

HardDrive tall sissy bars feature an attractive chrome plating in a square bar design. They offer extreme versatility when coupled with a set of HardDrive's detachable side plates which allow easy on and easy off setup (not included). Give your passenger some additional comfort with HardDrive tall sissy bars.

5.0 out of 5 stars ( 1 )

$89.96

—

$139.46

HardDrive Trike Brake Rotors

HardDrive Trike brake rotors are OEM replacement parts for use with OEM and aftermarket brake pads and calipers. The brake rotors are constructed from high-quality cast iron and coated with EDC (Electrical Discharge Coating) to provide a premium anti-wear and corrosion-resistant finish.

Not Yet Reviewed

$140.36

HardDrive Scepter 25 Fork Cartridges

HardDrive Scepter 25 fork cartridges are the most advanced kits available for your Harley-Davidson® motorcycle. They have been specifically designed to provide the best quality ride, handling, and comfort to your motorcycle. Most kits are available in multiple spring rate options. Select a HardDrive kit designed for your motorcycle. Features: * Preload, compression, and rebound adjustable cartridges * IFP (internal floating piston) design * 25mm CNC-machined 7075 T-6 damping piston ensures stable damping quality * High-strength Cr-Si steel springs ensure consistent spring rate and the best fatigue resistance * Wide range 24-click rebound and compression adjusters * Preload adjustability of 15mm on both sides * Touring models will not have access to adjustments once installed

Not Yet Reviewed

$577.76

—

$1,067.36

HardDrive Chrome Brake Calipers

HardDrive offers chrome brake calipers for a range of Harley-Davidson® motorcycles. The HardDrive calipers have a beautiful show quality finish and come ready to go with bleeders and brake pads installed. These calipers are direct OEM replacement (not for Springer models unless otherwise noted).

5.0 out of 5 stars ( 3 )

$248.36

—

$292.46

HardDrive Rear Drive Belts

Rear drive belts are under tremendous stress. HardDrive replacement belts are manufactured from state-of-the-art materials to ensure high-strength durability, quiet running, and a long life. Confirm the exact size of belt that is on your bike prior to ordering.

5.0 out of 5 stars ( 1 )

$157.46

—

$230.36

HardDrive Bazooka Shocks

HardDrive offers Bazooka rear shocks for a wide range of Harley-Davidson© and Indian motorcycles from the 1980s and up. Their race-proven Speed Adaptive Valving damping system provides superior ride quality regardless of road conditions. The shocks feature aluminum construction with a protective black anodized finish. They're available in a variety of extended lengths, single-adjustable or non-adjustable. Order the pair recommended for your bike. Additional details: * Internal Floating Piston (IFP) stabilizes damping performance * One-piece damping body construction forged from A7075 aluminum * Easy setup spring preload cap, no special tool needed * Available in standard or heavy-duty spring rates * Adjustable models can be purchased as Preload AND Rebound adjustable or Preload Adjustable only

Not Yet Reviewed

$533.66

—

$711.86

HardDrive M8 Breather Kits

HardDrive breather bracket kits allow the use of any M8 air cleaner assembly without integrated breather support. Available with a chrome or black steel bracket, each kit includes hardware and gasket to assist with your breather installation. (Breather not included). Select the finish you prefer for your motorcycle.

Not Yet Reviewed

$168.26

HardDrive Fat-Z Handlebars

Get a comfortable ride and a tubular style with HardDrive Fat-Z handlebars. Constructed of heavy-duty, high-quality steel tubing with welded step joints, which are knurled for 3 1/2 in. riser spacing, these handlebars are available in a chrome or black finish. They're drilled for internal wiring, with an installed pull-cord for easy wire installation. HardDrive handlebars are the perfect complement to your ride. HardDrive handlebars are sturdy, custom, and comfortable high-quality style.

3.33 out of 5 stars ( 6 )

$128.66

—

$242.96

HARLEY-DAVIDSON HardDrive Products Parts and Accessories