Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
GRIFFITH 200 Parts and Accessories
Showing In Stock Items. Show All 25 Items.
Cometic MLS Head Gaskets
Cometic MLS head gaskets are constructed from multiple layers of stainless steel for additional strength over traditional gaskets. They contain load-controlled embossments that help conform load distribution across the sealing area, and where applicable, valve pocketing to avoid chamber intrusion. This creates an exceptional seal by requiring less clamp load and resulting in less bore distortion. The stainless-steel outer layers utilize a rubber-binder coating that features high-temperature and chemical-resistant polymers. These gaskets are available for most cylinder heads. As with all Cometic MLS head gaskets, no sealants or re-torque is required when properly installed on prepared surfaces. Get the engine performance you want with an assist from the Cometic MLS head gaskets best suited for your application.
( 613 )
$90.59
—
$99.99
Proform Stainless Steel Oil Dipsticks
These Proform stainless steel oil dipsticks feature an ultra-sleek, thin profile to provide maximum clearance. They are CNC-machined from billet stainless steel to stay bright and rust-free. The dipsticks feature an O-ring seal to keep dirt and moisture out, and the braided stainless steel hose will flex around headers, tube mounts, and anything else in the way.
( 23 )
$52.99
—
$56.99
ACDelco Ignition Coils
Failure or poor performance from a coil can result in a misfire, a rough-running, hard-starting engine, and excessive emissions. ACDelco ignition coils provide the performance needed to help keep vehicles running the way that they were designed. These coils have corrosion-protected laminations to guard them from the harsh operating environment. Primary and secondary coil windings often feature molded plastic protection. Order the replacement model designed for your vehicle and engine application.
( 38 )
$52.99
Ford Performance Parts High-Volume Oil Pumps
Ford Performance Parts high-volume oil pumps are high-quality, pressure-tested, and hand-turned to deliver more oil than stock pumps. They are offered for most popular Ford V8s. Additional information: * Most are high-volume with standard pressure * Also available for select applications requiring higher volume and pressure * May require bolt-on style pickup (not included) * Some are not recommended for use with stock-capacity oil pans due to their higher pumping capacity * Because of their larger size, some pumps will not fit stock rear sump oil pans * Where applicable, includes a steel backing plate to reduce internal leakage and cavitation erosion
( 47 )
$63.99
COMP Cams Magnum Double Roller Timing Sets
Building a really high performance street vehicle? COMP Cams Magnum double roller timing sets are built for maximum performance on the street. They have heat-treated, pre-stretched, large-pin, double-row chains for extra strength and reliability. They also have an induction hardened cast iron camshaft gear and billet steel crank sprocket with three keyways, which allow you to set cam timing at 4 degrees advanced, 4 degrees retarded, or normal. In addition, all COMP Cams Magnum double roller timing sets are dynamically balanced for smoother operation.
( 245 )
$93.99
King XP-Series Rod Bearings
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 77 )
$87.99
—
$91.99
Hastings Piston Ring Sets
Whether it's a car, truck, motorcycle, marine, or performance racing—properly sealing the piston to the engine block is a requirement. Hastings Piston ring sets do just that, while being offered in many different options to fit virtually any piston out there. If the engine your working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. Hasting piston ring sets are great for rebuilds or new builds. Hastings has been manufacturing piston rings since 1915 and they have not spent a second developing anything but piston rings. Trust the professionals at Hastings and use them on your next job.
( 140 )
$64.99
—
$78.99
PRW Gold Series Flexplates
PRW Gold Series flexplates are engineered to handle extreme duty applications and designed to endure the punishment of modern high horsepower engines. The 4mm thick centerplate provides a solid foundation for these direct bolt-on drivetrain components. Ring gears are precision double-welded, utilizing robotic machinery and cold-welding processes for added durability. These flexplates are rigorously inspected throughout the manufacturing cycle to ensure you receive the expected quality. They are available in a wide variety of configurations to precisely match your application. Raise the bar on your high performance vehicle with PRW Gold Series flexplates. Order the style recommended for your specific vehicle and engine size. Features and specs: * Designed to fit standard OEM, aftermarket replacement, and high performance torque converters * SFI 29.1 certified * Forged one-piece steel ring gears * 0.035 in. thicker than stock flexplates * Constructed from cold-rolled chromoly steel * Long lasting yellow zinc plated finish
( 63 )
$91.23
—
$95.99
ACL Performance Race Series Main Bearing Sets
ACL Performance Race Series main bearing sets deliver everything performance bearings should be by utilizing design, metallurgy, engineering, precision quality control, and of course, years of knowledge and experience. Main bearings feature multi-layered tri-metal copper alloy construction that blends characteristics to provide high strength and excellent seizure resistance. They are manufactured to exact tolerances ensuring a reliable fit and helping to maintain consistent clearances. Main bearings are augmented with extended grooves, as well as other bearing enhancements, like increased crush, bearing eccentricity, and enlarged I.D. chamfers. ACL Performance Race Series main bearing sets are produced in standard and extra clearance versions, with or without friction reducer coating, and with modifications to meet specific build requirements, such as narrowed bearings that permit additional edge clearance when running crankshafts with exceptionally large fillet radii. In the heat of competition proven technology always comes through. The choice for your build should always be ACL Performance Race Series engine bearings. Choose the main bearing set designed for your vehicle.
( 1 )
$99.99
King HP-Series Main Bearings
King HP-Series main bearings are recommended for street and strip performance applications. They're designed for blown, turbocharged, NOS, and alcohol-fueled engines using aftermarket crankshafts. These main bearings have greater eccentricity for superior oiling at high rpm, and a chamfered surface for large radii crankshafts. HP-Series bearings also feature large, chamfered oil holes—and are available in 1/2 grooving for improved oiling to withstand high-rpm applications. Order the bearings designed for fitment with your specific engine.
( 53 )
$72.99
—
$78.99
Fel-Pro Head Gasket Sets
When you're looking to replace leaking or worn-out engine seals, Fel-Pro head gasket sets have you covered. Ideal for your stock rebuilds or street-driven cars and trucks, Fel-Pro gaskets will have you back on the road in no time. They're available in hundreds of configurations for fitment on countless vehicles and engine types. Order the set designed for your car, truck, van, or SUV. (These gaskets are not intended for race applications.)
( 379 )
$92.99
King HP-Series Rod Bearings
King HP-Series rod bearings were developed mainly for drag race applications needing a material harder than the Babbitt top layer. These applications demanded a structure that could withstand high loads for short durations and still offer higher embeddability and compatibility. In response, King developed the HP-Series, featuring the Alecular metal structure. The HP-Series is also suited for many performance applications with nodular cast iron crankshafts, such as street, strip, and some levels of Circle Track racing. Order the set recommended for your vehicle. HP-Series bearings are particularly suitable for the following cases: * When a tri-metal bearing's Babbitt overlay extrudes over the sides, migrates to one end, or is physically removed by the crankshaft * When the intermediate layer of a tri-metal bearing is exposed, damaging the crank journal and requiring expensive grinding or replacement * When contaminants enter the oil stream, scratching and damaging the crankshaft journals
( 41 )
$85.99
—
$99.99
SCE Pro Copper Head Gaskets
Not all solid copper gaskets are created equal. SCE uses premium 99 percent pure copper sheets that are precisely rolled to our specifications and tested for uniform flatness to assure precise cylinder head-to-block alignment and eliminate uneven loading. After processing, each gasket is annealed to ensure optimum mating and provide measurable gains in cylinder sealing, as evidenced by lower leak-down percentages. O-ringing is recommended. Pro Copper gaskets are available in many bore and thickness combinations to suit your performance needs.
( 17 )
$80.70
—
$97.34
King HP-Series Cam Bearings
King HP-Series cam bearings are precision-machined to tight tolerances to control installed oil clearances, reducing operating bearing pressure. These cam bearings are constructed from seamless steel tubing with a thin layer of lead based babbit material to reduce microscopic deflections. The babbit is quickly cooled in the casting process to achieve a very fine grain structure, doubling tensile strength, therefore, the HP-Series offers much more fatigue strength than conventional bearings, and can withstand racing spring loads, while maintaining the excellent surface characteristics of babbit. King also offers HP-Series bearings with a fluoropolymer coating. Bearings with this coating retain engine oil on the surface, even under extreme heat and pressure—a great advantage! Plus, being a lubricant, it provides backup during start-up and in the event of momentary oil starvation. Use track-tough King HP-Series cam bearings in your engine—and experience the difference.
( 19 )
$77.99
SCE MLS Spartan Head Gaskets
SCE MLS Spartan head gaskets are strong, simple to use, and ready for battle. These multi-layer stainless steel (MLS) gaskets feature fluid sealant coating applied to all inner and outer gasket plates. This proprietary method provides a continuous, unbroken coating that seals up to 60RA surface finishes on block and heads, and a superior cold seal. Choose the model designed for your vehicle. SCE Spartan head gaskets, with their advanced manufacturing, delivers trouble-free, bolt-on performance without extra sealants.
( 4 )
$84.34
—
$88.16
Mahle Original Cylinder Head Gaskets
Mahle Original offers a choice of cylinder head gaskets to fit your project with the most effective, leak-free seal. Because vehicles and performance levels are as different as the people who drive them, a head gasket that works for you may not work for another. Mahle Original knows this. Their list of head gasket materials includes multi-layered steel, Solicor, VR-2000, Nitroseal, and VR500. Each does their job differently, but you can rest assured that the sealing job they do will be effective and efficient. Positive sealing is available with Mahle Original cylinder head gaskets. Order the style designed for fitment with your vehicle and engine application.
( 47 )
$52.99
SCE AccuSeal Pro Valve Cover Gaskets
When you need a professional seal, choose SCE AccuSeal Pro valve cover gaskets. These premium replacements are made with proprietary materials and processes to provide you with the seal that you need and expect. They're offered in more than a half-dozen materials and thicknesses, engineered to resist heat and irregularities in sealing surfaces. Do you have cast covers, sheetmetal covers, or an application with severe vibration? Use SCE super-tough AccuSeal Pro gaskets and you won't have to change them every round! Order the model designed for your year/make and engine application—for sealing power and top performance on the street or track.
( 60 )
$64.99
COMP Cams High Energy Timing Sets
COMP Cams High Energy timing sets are a solid choice for many applications. They are designed to meet or exceed all OE specifications, which makes them a good selection for RVs, street rods, or daily drivers.
( 31 )
$55.95
Hastings Premium Ductile Ring Sets
Whether it's a car, truck, motorcycle, marine, or performance racing application—properly sealing the piston to the engine block is a requirement. Hastings premium ductile ring sets do just that, and they're offered in many different options to fit virtually any piston. If the engine you're working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. These premium ductile piston ring sets are great for rebuilds or new builds, daily drivers or performance vehicles. Order the sizes needed for your project.
( 171 )
$98.99
Mahle Original Engine Conversion Gasket Sets
Mahle sealing products are trusted by OEMs and technicians around the globe. They are the leaders in domestic, Asian, and European applications. Mahle engine conversion gasket sets offer the right sealing performance for your project. These kits are precision-cut and contain the correct selection of gaskets and seals needed. Some kits may include RTV for upper and lower pan gaskets. Need a full set? Just add one of Mahle's head sets and you will have everything you need. Features include: * Meet or exceed the original equipment specifications * Utilize OE equivalent or better materials * Packaged in a shrink-wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
( 13 )
$54.99
Cometic Street Pro Bottom-End Gasket Kits
Cometic Street Pro bottom-end gasket sets gather all of the necessary parts in one handy kit, tailored to specific years/makes/models. Rebuilding or servicing an engine can be quite an ordeal--trying to locate all of the correct gaskets, seals, washers, and O-rings for the many sections. If the fit isn't perfect, you know the messy results.There's no need for you to hunt down replacement seals for oil pans, water pumps, pickup tubes, cranks, drains, timing covers, retainers... you get the picture. Match up your vehicle with the corresponding Cometic Street Pro bottom-end gasket set and order today!
( 2 )
$92.99
Hastings Steel Series Performance Ring Sets
Hastings Steel Series Performance ring sets put the performance in your mind in your engine! With them, you can expect better oil control, longer engine life, and confidence—from the moment you start. Their alloy steel material allows for reductions in compression ring cross-sectional dimensions--both axial height and radial width. These rings decrease the engine's reciprocating mass, and can be fitted to the latest designs of lighter, reduced deck-height pistons with restricted ring belt areas. Hastings Steel Series rings are a must for high performance sport compact and late model race engines. Order the set that best matches your application. Features, items, and specs: * Top and 2nd rings offered in increasingly thinner axial heights * Durable alloy steel top rings available with torsional or barrel-faced shapes * Top compression rings available with either plasma moly impact-resistant alloy (SM) or chrome (SC) coatings * Second groove rings feature either torsional reverse-twist taper cast iron or Napier-faced ductile iron construction with a phosphate coating * Chrome-plated, Flex-Vent oil rings made from 1070 segmental steel rails with 201 stainless steel expander
( 7 )
$50.99
